Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
'https://cdn.cougparts.com/dc/47896/1429833087_y.jpg','https://cdn.cougparts.com/dc/47896/1429833086_y.jpg','https://cdn.cougparts.com/dc/47896/1429833256_j.jpg','https://cdn.cougparts.com/dc/47896/1429833087_u.jpg','https://cdn.cougparts.com/dc/47896/1429833088_q.jpg','https://cdn.cougparts.com/dc/47896/1429833090_m.jpg','https://cdn.cougparts.com/dc/47896/1429833089_m.jpg','https://cdn.cougparts.com/dc/47896/1429833091_w.jpg','https://cdn.cougparts.com/dc/47898/1516907868_v.jpg'
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896
  • Heater Box - With A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang - 47896

Item #: 47896

Login to add this item
to a saved wishlist
Price: $413.85
    Cost: 33108
    Earns: 1656
    Bonus: 0

    Availability

    Ships Direct from Supplier (Except International) - 1-3 Business Days EXCEPT AS NOTED IN THE PRODUCT DESCRIPTION
    International Orders will ship from supplier to our warehouse before shipping to International addresses, add 7-10 Days

    Applications

    Description

    Usually ships in 3-5 business days.

    Reproduction heater box with A/C for 67 - 68 Cougars and Mustangs. This new plenum is made of a sturdy hard plastic that should hold up much better than the original fiberglass boxes. Includes pre-installed seals, clips, flaps, brackets, etc. Just install your heater core (with end cap seals) and AC evaporator (with rubber grommet). See related products.

    The style of this box most resembles the 1967 version, with the flat mating surfaces between the two halves. The 1968 and later versions had a "jog" here. That being said, this box will fit 67 and 68 equally well. Given the rarity of unbroken original heater boxes, we're very glad this quality reproduction is now available!

    NOTES: We've received some helpful feedback you should be aware of. First, since 1967 and 1968 heater boxes were a little different, you may find that one of the flapper control arms on this box is a little different than how your original was configured. This means you may have to adjust the fitting on the small vacuum actuator that controls it. Second, the large round foam seal that comes installed on this box, where it mates to the blower housing, is a much harder, denser foam than what was originally used, and will likely cause installation problems. Because of this, we suggest also purchasing the separate seal kit which includes a more correct soft, open-cell foam piece. We're working with the manufacturer to correct this, and will delete this text if / when that happens.


    Check out our video below on how to replace a '67-'68 (with A/C) heater core!


    Specifications:
    Shipping Weight: 15.00 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    4.20 out of 5 stars
    Based upon 5 Review(s).
    5 Stars
    20%
    4 Stars
    40%
    3 Stars
    20%
    2 Stars
    0%
    1 Stars
    0%

    Decent replacement

    4.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Sturdy
    • Fits well
    Cons:
    • Expensive
    • Difficult to install
    68 Base 302 F. My old 68 heater box was shot. Cracks, rusty doors, broken drain, and someone used chair foam for seals in the past. The new box was expensive, but seems much sturdier. I watched the WCC video and was able to remove the old box without much trouble. A few notes:
    1. The new door rods do not have stops to keep the vacuum actuator arms from sliding too close to the box. I’m not sure how this will affect their operation as my engine is out for a rebuild.
    2. Order the foam seal kit you will need most of the seals if your system is original.
    3. The box I received came with the AC grommet for the evaporator tubes.
    4. Installation was much more difficult than removal. Getting the blower to seat in the box while trying to get all 3 firewall studs aligned took a lot of patience, prying and swearing. I used a couple 1x1 1/2 pieces of wood. One to hold the box up and the other to pry the blower up. The drain hose was also a pain to get connected as there is limited space between the drain and floor.

    Box is not an exact duplicate but did fit and looks like it will last another 53 years. It is expensive but trying to restore my old one was not worth the time and effort.



    Da Box !!

    4.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    One take West Coast’s recommendation of the foam and seal kit the form that comes with the unit is too thick and hard . I did not remove the whole dash panel as Don rushes video I dropped it lowered the box below my glove box . In my 69 Xr7 . 2). New box is missing the notches in photo so you’re subject to purchasing the the grommets to metal grommets that holds the actuator handles in place. Other than that it does what it supposed to do .
    review image  

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    worked fine

    2017

    missing one of the studs

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    it was missing one of the studs going through the fire wall. I had to transplant the missing stud from the old box.

    Winnemucca, Nevada
    2014

    Overall worked pretty well

    3.75 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    In the end, the box went in and did what it is supposed to do.It will work fine. I had two fitment problems installing it. One of the metal flaps was not in the same location as the original and I needed to modify the fitting on the small vacuum actuator in the car. Also, the foam gasket that came with the kit to mount the box to the heater blower motor was too thick and heavy. I could not make the box fit with that gasket in there. I cut the gasket in half and it was still too thick. I ended up using a soft foam gasket from another seal kit that I had and throwing away the one that came with it.

    Number of questions: 0
    Please login to ask a question.

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)
    I was having difficulty placing my order on the website and spent a couple of hours trying with no luck (ending in immense frustration). I decided to finally just call and order my parts over the phone (4 small items). Was surprised that Don Rush...
    - Tim (1969 Cougar XR7)
    Brake booster failed on our 1970 Mach1. We had ordered a new 2022 Mach1 to match the old one and the dealer wanted to use both cars in a promotional ad. When we received the replacement booster it failed within a few minutes of installation. I...
    - Alan
    WCCC makes finding the right part with the right fit easy. I love that they try to get great parts and when there are parts that don't meet their standard they WARN you up front! I've bought new reproduction parts from them, used parts and even had...
    - Daniel
    D2I04