All Available Parts - 1971 Ford Mustang
Products (Click sub-categories above to ONLY display results for that Sub-Category) 2201-2300 of 2507
Sorted By:
Availability:
Display Options:
Availability: Out of Stock
Item #: 41986 -
Reproduction emergency / parking brake cable for the Mercury Cougar or Ford Mustang with V-8 engines, that is approximately 133 1/8" long. This unit fits from equalizer to rear brakes and one is required per vehicle.Replaces Ford part # D0ZZ-2A635-A.
Availability: Out of Stock, Discontinued
Item #: 10083 -
These is the correct driver side backing plate (sometimes called a splash shield) for 1968 - 1973 Cougars and Mustangs. Sold individually by side, each plate comes with the backing plate retainer. No other hardware is included. Although these plates fit the 68, they're cosmetically different in that 68 did not have cooling scoops.
Availability: Out of Stock, Discontinued
Item #: 10080 -
These is the correct passenger side backing plate (sometimes called a splash shield) for 1968 - 1973 Cougars and Mustangs. Sold individually by side, each plate comes with the backing plate retainer. No other hardware is included.Although these plates fit the 68, they're cosmetically different in that 68 did not have cooling scoops.
Availability: Out of Stock
Item #: 32849 -
New old stock emergency / parking brake pedal pad that features all stainless steel construction. Fits any 1969-73 Mercury Cougar and Ford Mustang.Replaces Ford part # C9ZZ-2A487-C.
Availability: Out of Stock, On Order
Item #: 19943 -
This reproduction emergency / parking brake idler bracket welds to the under side of the floor on the driver side (left hand) of the vehicle and has the factory spec pin.
Availability: Out of Stock, On Order
Item #: 13945 -
This passenger side (right hand) reproduction emergency / parking brake cable idler bracket mounts to the right front floor pan. The idler bracket is often discarded when the floor pan is removed for replacement. We also have good used units in stock for those that desire 100% correctness.
Availability: Out of Stock
Item #: 10554 -
Quality replacement brake drum. # of Bolt Holes : 5 Inside Diameter : 254 mm Bolt Circle Diameter : 114.3 mm Brake Drum Surface Depth : 71.6 mm Center Bore Diameter : 61.8 mm Maximum Discard Diameter : 256.3 mm O.D. : 296.3 mm Replaces Ford Part #:C2OZ-1126-B
Availability: Out of Stock
Item #: 23816 -
C3OZ-1126-B Used brake drum with the vintage casting look. Guaranteed to successfully be turned and not exceed the manufacturers inside maximum of 10.060". When we say the "vintage casting look", we mean with the proper groove and contours. Reproductions are fine, but do not retain the casting design of the original casting company. When looking for used brake drums, the rule of thumb is to find ones with a brake surface area of 1/4 inch more than the brake shoe width.
Availability: Out of Stock
Item #: 24616 -
C9OZ-2211-B Right hand rear brake backing plate for use with 2 inch wide brake shoes. Clean Western part with no heavy corrosion like you see on Eastern cars. Inspected for excessive wear. Used on cars with 10" drums.Originally manufactured by Kelsey-Hayes, KH part number 71085. Originally manufactured by Bendix, part number 317559.
Availability: Out of Stock
Item #: 24618 -
C9OZ-2212-B Left hand rear brake backing plate for use with 2 inch wide brake shoes. Clean Western part with no heavy corrosion like you see on Eastern cars. Inspected for excessive wear. Used on cars with 10" drums.Originally manufactured by Kelsey-Hayes, KH part number 71086. Originally manufactured by Bendix, part number 317558..
Availability: Out of Stock, Discontinued
Item #: 23798 -
C2OZ-1126-B Used brake drum with the vintage casting look. Guaranteed to successfully be turned and not exceed the manufacturers inside maximum of 10.060". When we say the "vintage casting look", we mean with the proper groove and contours. Reproductions are fine, but do not retain the casting design of the original casting company. When looking for used brake drums, the rule of thumb is to find ones with a brake surface area of 1/4 inch more than the brake shoe width.
Availability: Out of Stock
Item #: 25915 -
These new brake drums are perfect replacements for tired and thin originals on you Cat or Pony. Fits cars with either the 2 1/4 inch or 2 1/2 Inch shoes. Front drums do not include studs or a hub. Drums Provide Consistent Quality & Reduced Noise.; Drums Are Vehicle Specific & Meet Federal Safety Standards.; Castings Meet Sae J431/g3000 Specifications For Proper Tensile Strength.; Machined To Control Perpendicularity & Run-Out For Optimal Performance & Brake Life.Also fits V8...
Availability: Out of Stock
Item #: 13680 -
Used hairpin clip for attaching the brake light switch to the brake pedal. This clip was also used to attach the clutch rod to the clutch pedal on manual transmission cars. Fits all years 1967-73, Ford and Mercury.
Availability: Out of Stock, On Order
Item #: 12474 -
Used brake shoe guide plate, or anchor pin, that holds the top of the drum brake shoes together on your Mercury Cougar or Ford Mustang equipped with drum brakes. For the money our reproduction plate is a better value and cleaner, too. These have 1/2 inch holes in them.Replaces Ford part number C4UZ-2028-A.
Availability: Out of Stock
Item #: 12476 -
Used brake shoe guide plate, or anchor pin, that holds the top of the drum brake shoes together on your Mercury Cougar or Ford Mustang equipped with drum brakes. For the money our reproduction plate is a better value and cleaner, too. These have 1/2 inch holes in them.Replaces Ford part number C4UZ-2028-A.
Availability: Out of Stock, On Order
Item #: 14178 -
Reproduction brake light switch for the Mercury Cougar and Ford Mustang equipped with manual brakes. High quality replacement part, but the appearance is not original.
Ford originally called this unit the stop lamp switch.
Replaces Ford part # D1ZZ-13480-A.Here are some pictures of the 2008 Prowl Show hosted by the Cascade Cougar Club. Click on images to enlarge. ...
Availability: Out of Stock
Item #: 41920 -
Steel tubing features tin/lead coating and plated zinc chromate fitting and are exact copies of the originals with color coded fittings.
Availability: Out of Stock
Item #: 20149 -
Passenger side (right hand) front seat floor pan. This pan is cut from the full floor pans in order to save on shipping costs when a customer does not need the entire length pan. Cutting from the Dynacorn full length pans means this will be a quality cut, when compared to other pans on the market. 1967-68 style ribbing, works in 1969-70 and can be modified to fit 1971-73. *NOTE* This floor pan has the outside lip bent down which is proper for coupes, convertibles were bent up....
Availability: Out of Stock, On Order
Item #: 14301 -
Now you can replace this original part, which is commonly stripped out, with a nice reproduction. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like the 1967-73 cars. We have noticed that the last generation 1971-73 Cougars had 4 round shaped plates in the rear floors. Same threads, all work the same. These were pretty much used on all Ford...
Availability: Out of Stock
Item #: 10285 -
Used original FoMoCo upper cowl cut for all 1971-73 Mercury Cougars and Ford Mustangs without A/C. Bear in mind that the inner metal section, or the undersides, did not get paint and is the upper cowl section as shown. A/C cars differ, they have a fresh air duct arrangement. Note that this part will not be perfect and will require hours of spot weld removal due to how large we cut them. The shipping will also be much more than our repro. We highly suggest buying the repro as it is a direct...
Availability: Out of Stock
Item #: 10286 -
Used original FoMoCo upper cowl cut for all 1971-73 Mercury Cougars and Ford Mustangs with A/C. Bear in mind that the inner metal section, or the undersides, did not get paint and is the upper cowl section as shown. A/C cars differ, they have a fresh air duct arrangement. Note that this part will not be perfect and will require hours of spot weld removal due to how large we cut them. The shipping will also be much more than our repro. We highly suggest buying the repro as you can easily modify...
Availability: Out of Stock, On Order
Item #: 12455 -
New pair of white and yellow paint sticks for the Mercury or Ford. These units were used by FORD at the assembly plants to mark fender aprons, radiator support, transmission, rear end housing, sheet metal, glass and variety of other parts. It's often little details like this that separate first and second place at the show.
Availability: Out of Stock
Item #: 10010 -
This is a great, well fitting reproduction and is also all you need to replace the firewall on your 71 - 73 Cougar or Mustang. This is the entire wall, from passenger side to driver side, cowl to floor pan. Made specific for cars with A/C.
Availability: Out of Stock, On Order
Item #: 42395 -
Reproduction passenger side (right hand) outer frame rail patch for the Mercury Cougar and Ford Mustang. The outer rail has weld nuts installed for proper installation.
Availability: Out of Stock
Item #: 32629 -
Driver side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel. Ford part number D1ZZ-7653119-A.
Availability: Out of Stock
Item #: 32630 -
Passenger side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel. Ford part number D1ZZ-7653118-A.
Availability: Out of Stock
Item #: 27330 -
This driver side moulding is correct for convertible. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket. The engineering number imprinted on the back is D1ZB-6503599 for 1971-1972 and D3ZB-6503599 for 1973. Convertibles show the same casting numbers on the part, but are a modified before assembly. We do have factory cut convertible mouldings both early and late. Ford part # D1ZZ-7603599, D1ZB-6503599-aw, D3ZZ-7603599, D3ZB-6503599-aw *NOTE* Excludes...
Availability: Out of Stock
Item #: 31306 -
Detachable mounting plate for installing the convertible ram cylinder to the convertible top frame assembly behind the quarter interior panel. Right and left are the same, fits all 1971-73 Mercury Cougar and Ford Mustang convertibles. Ford part number D1ZZ-76531A19-A.
Availability: Out of Stock, Discontinued
Item #: 25410 -
Quality reproduction power top or convertible switch for 1971-73 Ford Mustang. Switch comes with black toggle tip and chromed screw on bezel. This is a Mustang part that will not fit in the 3 gang switch on the dash of your XR7 Cougar. The only reason we list it is that if one wanted to mount this elsewhere on the dash it would at least match the look. Used Cougar convertible top / power sunroof switches are very hard to come by thus the need for a possible "go-around" fix.
Availability: Out of Stock
Item #: 42211 -
Galvanized three piece replacement tack strips for the 1971 - 1973 Cougar convertible. Over-sized, must be shipped via UPS.
Availability: Out of Stock, Discontinued
Item #: 42123 -
Our well (or boot) liners fit correctly. Made of heavy duty, textured vinyl.
Availability: Out of Stock
Item #: 23230 -
Older used aluminum intake manifold. Port size is for the 2V cylinder heads. Perfect for adding a 4 barrel carburetor to a stock 351 Cleveland 2V engine.
Availability: Out of Stock
Item #: 31647 -
Harmonic balancer or damper, core grade 1971 Boss 351 Ford Mustang. Marked D1ZX-6316-AA. Age cracks in the rubber, should be rebuilt prior to use. Groove opposite of timing marks as shown, no other visible issues.
Availability: Out of Stock
Item #: 42014 -
This pair of reproduction convertible top hooks are beautifully chrome plated and features correct thread size. Looks close to original. These hooks are actually for 71 - 73 Cougars and Mustangs, but will work just fine on the 69 - 70.
Availability: In-Stock Item
Item #: 23892 -
C5ZZ-7610962-A Ford description of this plate is "Plate - Front floor lower cross member". All 1967-73 Cougar convertibles and all 1965-73 Ford Mustang convertibles use this plate. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. As you look at our picture below you will see the repro is about half the thickness. The repro is different in every detail but will work. We also have used plates with minor damage at a reduced cost.
Availability: Out of Stock, Discontinued
Item #: 15291 -
WOW! How long have we been trying to scrounge up good used pins for restoration? These are identical to what is found on all 1969 Cougar and Mustang Convertibles. They are correct for most of the 1970 model year and even if you are one of the few that own a late 1970 Mustang / Cougar they will work on your car too. These also work on the 1971-1973 Convertibles.The picture below shows the new reproduction on the bottom, used 69-70 in the middle and a 1971-1973 pin at top. //-->WCCC is...
Availability: Out of Stock
Item #: 25276 -
D1AZ-9A603-A Metal shroud for all 1971 351 engines including H code 351-2V and M code 351-4V. One piece design uses a paper and aluminum tube to bridge to the air cleaner snorkel.
Availability: Out of Stock
Item #: 25277 -
D1AZ-9A603-C Metal shroud for all 1971 429 Cobra Jet engines including C code 429CJ non-ram air and J code 429 CJ with ram air. One piece design uses a paper and aluminum tube to bridge to the air cleaner snorkel. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested...
Availability: Out of Stock
Item #: 15157 -
Application would be for only 1971 Cougars with the 429CJ option, either ram air or non-ram air. Original Ford part number is D0GY-9A626-A. Also used on the Torino / Cyclone / Cobra / Ranchero. Notice the main difference between this genuine CJ snorkel and the "Economy" truck snorkel we have listed is the mounting flange hole placement and contour.
Click on images to enlarge. ...
Availability: Out of Stock
Item #: 18697 -
Application would be for only 1971 Cougars with the 429CJ option, either ram air or non-ram air. Original Ford part number was D0GY-9A626-A, this unit is from a Ford Truck, part #is from a D3TZ-9A626-G. This is a low cost alternative to a very rare part.
Click on images to enlarge. ...
Availability: Out of Stock
Item #: 41458 -
Fits all V8s with oval air cleaner.
Availability: Out of Stock, On Order
Item #: 10666 -
New air cleaner breather element for all 1970-73 Mercury Cougar and most all Fords with V-8 engines. This filter fits inside your air cleaner base, a hose connects to the fitting and goes to the PCV valve in the valve cover. Sold as shown, includes cartridge holder, retainer clip and filter.
Availability: Out of Stock
Item #: 25411 -
This engine compartment lamp assembly includes lamp socket, bracket, mercury switch, and length of wire. *NOTE* This unit was used on Cougars and Mustangs produced before 12/15/1971.Replaces part # D1ZZ-15702-A
Availability: Out of Stock
Item #: 10667 -
Adapter tube for connecting the fuel vapor purge tube to the air cleaner base. Can be either blue or black in color.
Availability: Out of Stock, Discontinued
Item #: 19996 -
Black paper wrapped aluminum flexible tube that connects the vapor canister to the air cleaner. This is as close to concours as we can find, 3/4 inch diameter, 36 inches long, and black outside, brown paper color inside. Fits 1970 California Delivered Cars and all 1971 - 1973 Cars. Look for Buck Tag EV or EM. Preheat/Emission Control Duct. Replaces Ford Part #: D1UZ-9d667-A, D4HZ-9d667-A or D0AZ-9D667-A
Availability: Out of Stock
Item #: 18889 -
This wheel is inspired by the 1966 Shelby GT350 10 spoke alloy wheel. This updated design was created using state of the art casting technology for superior strength and precision. Each wheel features a CNC machined face with gloss black accents and a clear coat finish. These wheels take a specific shouldered 3/4" lug nut, find them here. These wheels come with free chromed plastic center caps. The caps have a red Legendary logo but we can include at no cost, a set of black and chrome walking...
Availability: Out of Stock, Discontinued
Item #: 19670 -
These are actually a Mustang trunk pan, but can be made to work in a Cougar. THESE WILL NOT FIT A COUGAR WITHOUT MODIFICATION (see reference photo above). This part must be shipped via Truck Freight.
Availability: Out of Stock
Item #: 22957 -
The Hustler Stick features heavy-duty 1-1/4" diameter tubing, and is an alignment bar designed for bumpers, hoods, decks, panels etc. Made in the USA, it has a 1/4", 6 foot long chain with hooks at each end. This versatile tool is very useful in shaping damages on a vehicle body. To use it, hook it up to the panel or bumper, anchor the stick properly, and pull it by hand.We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged...
Availability: Out of Stock, On Order
Item #: 14-0024 -
New adhesive / epoxy applicator to apply our 3M window adhesive to the glass (or whatever else needs bonding) in your Mercury or Ford. This non-drip unit features an easy loading breech, a 1:1 mixing ratio and full cartridge support. We also offer a 60 day loaner if you only need this unit for a short time. ...
Availability: Out of Stock
Item #: 31044 -
We will loan you this adhesive / epoxy applicator for 60 days, with a 100% refundable purchase price. Only available to customers that purchase our 3M bonding adhesive. Tool must be returned in undamaged condition with no missing parts within the 60 day time period.Returns past 60 days are subject to a 25% restocking fee. ...
Availability: In-Stock Item
Item #: 12379 -
We will loan this coil spring compressor for 60 days, with a 100% refundable purchase price. This tool now comes with a bearing to make the job much easier. Only available to customers that purchase our front suspension rebuild kits. Tool must be returned in undamaged condition with no missing parts within the 60 day time period. Returns past 60 days are subject to a 25% restocking fee. Coil spring compressing tool, this is a must for safely removing front coil springs on any 1967-73...
Availability: Out of Stock, On Order
Item #: 26662 -
If these drain plugs are absent mice will be able to find their way into your car. Sold as a pair. Replaces Ford part #: C7ZZ-6511202-A.
Availability: Out of Stock, On Order
Item #: 31364 -
Reproduction pinion seal for the 9 inch ring gear on the 1967 - 1973 Mercury Cougar or Ford mustang.
Availability: Out of Stock, Discontinued
Item #: 25388 -
Good used Ford 302 V-8 power steering bracket. Correct for Ford and Mercury with 302 engines after 1970. Mustang, Ranchero, Torino, Montego, etc.Ford casting # D1ZA-3C511-AB.
Availability: Out of Stock
Item #: 19984 -
New intake manifold that has never been used, but it's missing the packaging, so we're calling it an "out of box special". Port size is for the 2V cylinder heads. Perfect for adding a 4 barrel carburetor to a stock 351 Cleveland 2V engine.
Availability: Out of Stock, Discontinued
Item #: 53198 -
New old stock Motorcraft headlight switch for any 1971-73 Ford Mustang. NIB new in the box stamped as a 1973 switch, but the MPC says that it is a service replacement going back to 1971. 1971 1972 1973 Mustang Mach 1
Availability: Out of Stock
Item #: 33640 -
Round ring shaped gasket that goes on top of the carburetor. Protects and seals the carburetor to the air cleaner.New Old Stock Ford gasket, Ford part number C5ZZ-9654-B.
Availability: Out of Stock
Item #: 33465 -
NOS plastic brackets that screw to your roof and then slide a vinyl colored piece over. Sold individually, two are required per car. Ford part # C8AZ-6229232-A.
Availability: Out of Stock
Item #: 33466 -
NOS white colored coat hooks pair. Reproductions only come in black, these are new in the package. White color started in 1970, off white and parchement 1968-69. Fits 1968-73 Mercury Cougar and Ford everything including that Mustang. Ford Part #: D0AZ-6229024-K.
Availability: Out of Stock
Item #: 32859 -
New old stock hood bumper for any 1971-73 Mercury Cougar or Ford Mustang. Sold individually, limited to stock on hand. Replaces Ford part #D1ZZ-16758-A
Availability: Out of Stock
Item #: 25842 -
New old stock instrument voltage regulator Ford part number C9AZ-10804-ACheck out our video below on how to use the new gauge tester: ...
Availability: Out of Stock
Item #: 25834 -
Availability: Out of Stock
Item #: 32781 -
NOS Key reminder buzzer for 1970-71 Mercury Cougar and Ford Mustang. Also used on 1970-72 Lincoln MKIII and Thunderbird. Can also be stamped DOAB-13150-B, DOAB-13150-E, and DOAB-13150-F. Ford master part number D0AZ-13150-E. NOTE: This buzzer is for ignition key reminder with two posts. The four post ignition / headlight buzzer can be found here. Click on images to enlarge. ...
Availability: Out of Stock
Item #: 32778 -
(7526) Nylon plastic injected. New Old Stock. Protects clutch equalizer and rod, and removes excess play. These are to put on either end of your clutch pedal rod. Sold individually. If your going to do both ends you will need to order 2 of these. Replaces Ford Part #: C0AZ-7526-B. Customer review: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where...
Featured!
Availability: Out of Stock
Item #: 32782 -
New old stock 1968-72 (works on 1967) Mercury Cougar XR7 and Ford Mustang Deluxe shifter button for automatic transmissions. This is for all cars with body type 65B, 76B, and Grande. This is for the deluxe model shifter. New old stock, NOS. Ford part number C8OZ-7C488-A. Check out our video on rebuilding your shifter below: ...
Availability: Out of Stock
Item #: 32789 -
New old stock stainless clutch pedal pad trim. About 1/8 inches wider that the reproduction version. Replaces Ford Part #: C9ZZ-7B544-A.
Availability: Out of Stock
Item #: 32769 -
New old stock check valve for Bendix brake boosters. This is a white plastic check valve. Ford part number D0AZ-2365-A.Check the related items, for a reproduction rubber grommet.
Availability: Out of Stock
Item #: 20174 -
This rare accessory was only offered over the counter, it was not available as a factory option. Great upgrade for the 1970-1973 Cougar owner as cruise control was discontinued after 1969 and not offered again until 1974 on the Mercury Cougar.Ford part number C8OZ-9B742-AClick on images to enlarge. ...
Availability: Out of Stock, Discontinued
Item #: 32008 -
Steel freeze plug or expansion plug set for any Ford 351C engine. 1970-74 Mercury Cougar and 1970-73 Ford Mustang. 12 piece set with threaded screw in plugs as shown.
Availability: Out of Stock, Discontinued
Item #: 10937 -
Transforms your interior into a concert hall with superior musical sound quality. Eliminates the need to crank up the volume on your sound system, and by reducing vibration, it minimizes distortion. Plus the reduced noise level makes for a more pleasant ride when the stereo is off. Flexible material won't crack or peel. Adhesive backing allows easy, permanent installation behind speakers in doors or back seat panels, under speakers in trunk...anywhere. The 36" x 60" material can be easily...
Availability: Out of Stock, On Order
Item #: 12128 -
Timing chain set for your 67 - 72 Cougar or Mustang equipped with the 302 Engine.Gears (sprockets) are made from high alloy steel, and heat-treated for durability. Chain is pre-stressed and heat-treated for longevity.
Availability: Out of Stock
Item #: 12835 -
Used stamped steel pointer mounts to timing chain cover. Correct for 1970 Mercury Cougar with 351W engine, and 1970-72 Ford Mustang 302 and 351W. At least two distinct versions of this pointer may be availbable. Starting in 1970, Ford V-8 engines had timing pointers installed on the passenger side of the engine, and a companion harmonic balancer with 4 bolts for attaching crank shaft pulleys. Uses two of the timing cover bolts for attaching. Replaces Ford part C9TZ-6023-A. This icon means that...
Availability: Out of Stock, Discontinued
Item #: 10538 -
Premium quality 2-1/4" Diameter Black / Pearl Shift Knob. Graphics are subsurface and can not wear off. This knob has a 16mm x 1.5 brass Master Insert and comes with a Standard Thread adapter kit which includes one reducer and jam nut in each of the following sizes: 5/16-18, 3/8-16, 3/8-24 and 1/2-20. Made in the USA. *NOTE* Each Pearl style knob has its own unique pattern. The knob that you receive will vary somewhat from the knob shown in the photo.Check out this video f our 2013 Open House...
Availability: Out of Stock
Item #: 25398 -
D1ZE-9431-B 351-4V Cleveland factory original cast iron exhaust manifold for driver side. At some point there may have been a D1ZE-9431-BA casting number used, which may be substituted as per the Master Parts Catalog. *351C-4V exhaust manifolds only match up to factory 4V intake manifold ports and some aftermarket aluminum intakes such as offered by Weiand and Edelbrock.
Availability: Out of Stock
Item #: 25254 -
351-4V Cleveland factory cast iron 4V exhaust manifold set, both correct right and left set of matching exhaust manifolds. Manifolds the same 1971-1973.
Availability: Out of Stock
Item #: 13665 -
Single cylinder head from 1970-71 Mercury Cougar with M code 351C-4V engines. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 2.19 and 1.71 inch valves, and the chambers measure out at 62.8 cc's. These are considered 'Closed Chamber Heads'. With stock pistons, these heads will net an approximate compression ration of 10.7:1. Basic cylinder head number is 6090. Several Ford casting numbers were used, including the common D0AE-N. 4V in the...
Availability: Out of Stock
Item #: 25235 -
D0ZZ-7210-B Chromed "Hurst" labeled shifter for all 1970 - 1971 Mercury Cougar and Ford Mustangs with factory installed 4 speed transmissions. Tough part to find loose, most will be attached to the correct vintage Hurst Competition shifter mechanism. The 1970 Ford master part number is D0ZZ-7210-B, 1971 is D1ZZ-7210-A. These shifters originally came with the "Hurst" T handles installed. These shifters will not come with a "T" handle. Check out our video on rebuilding your shifter below: ...
Availability: Out of Stock
Item #: 10983 -
D0ZZ-7400-D Hurst built 4 speed manual shift control assembly for any 1970 - 1971 Mercury Cougar or Ford Mustang. Check out our video on rebuilding your shifter below: ...
Availability: Out of Stock
Item #: 10971 -
Used Hurst built 4 speed manual shift control assembly for the Mercury Cougar or Ford Mustang equipped with the manual transmission. This assembly includes the shifter mechanism, shift rods, and shift lever. The Ford MPC states that this same shifter was used on all V8 Mustangs and Cougars. This unit may be used for the 1971 edition and is in good used condition.Ford part # D1ZZ-7400-B. Check out our video on rebuilding your shifter below: ...
Availability: Out of Stock
Item #: 10984 -
D1ZZ-7400-A 3 Speed manual transmission shift control assembly for any 1971 - 1972 Mercury Cougar or Ford Mustang. Check out our video on rebuilding your shifter below: ...
Availability: Out of Stock
Item #: 10972 -
D1ZZ-7400-A3Assembly Factory 3 Speed manual transmission shift control assembly for any 1971 - 1972 Mercury Cougar or Ford Mustang. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The Ford MPC states that this same shifter was used on 6 cylinder Mustangs and all V8 Mustangs and Cougars as large as the 351-2V engine. Additionally Ford continued to use this shifter on 1973 Mustang with a 6 cylinder or 302-2V engine. Check out our video on rebuilding your shifter...
Availability: Out of Stock
Item #: 25400 -
Good used single sheave pulley for the alternator on the 429 Cobra Jet.Ford Part #: D1ZF-10A352-AA.
Availability: Out of Stock
Item #: 20112 -
Reproduction gold dichromate 10 blade alternator fan. Used on Mercury Cougars and Ford Mustangs manufactured after 11/17/1969. Actually this is a Ford part found on most all Ford automobiles from 1970-73. 10 blade alternator cooling fan. Replaces Ford Part #: DOAZ-10A310-B
Availability: Out of Stock
Item #: 25253 -
351 Cleveland factory cast iron 2V exhaust manifold set, both correct right D1OE-9430-AA and left D1ZE-9431-AA side matching exhaust manifolds.
Availability: Out of Stock
Item #: 25289 -
D1OE-9430-AA 351-2V Cleveland engine, factory original cast iron exhaust manifold for passenger side. *351C-2V exhaust manifolds only match up to factory 2V intake manifold ports and some aftermarket aluminum intakes such as one offered by Edelbrock.
Availability: Out of Stock
Item #: 18979 -
429CJ factory cast iron exhaust manifold set, both correct right and left set of matching exhaust manifolds.
Availability: Out of Stock
Item #: 25399 -
D1ZE-9431-CA 429 Cobra Jet factory original cast iron exhaust manifold for driver side. At some point there may have been a D1ZE-9431-CA1 or a D1ZE-9431-CA2 casting number used, either of which may be substituted as per the Master Parts Catalog. The current manifold in stock has a casting date of 4-28-70.
Availability: Out of Stock
Item #: 25046 -
D0OE-9430-A 429 Cobra Jet factory original cast iron exhaust manifold for passenger side.
Availability: Out of Stock
Item #: 25696 -
Original equipment 4 speed top loader transmission from a 1971 Mercury Cougar with engine code M 351-4V only. Transmission code 5 on the door tag, this would be a wide ratio 4 speed transmission with a 2.78 ratio first gear.Ford part # D0ZZ-7003-D, Ford casting # RUG-AV1. Percentages of Cougars equipped with a manual transmission by year1967 = 18.5%1968 = 13.2%1969 = 10.5%1970 = 7.8%1971 = 2.8%1972 = 1.5%1973 = 0.7%Total for 1967 to 1973 = 10.1% (Mustangs for the same time frame were...
Availability: Out of Stock
Item #: 25698 -
Original equipment 4 speed top loader transmission from a 1971 Mercury Cougar with engine code J 429 Cobra Jet and engine code C 429 Cobra Jet. Transmission code 6 on the door tag, this would be a close ratio 4 speed transmission with a 2.32 ratio first gear. The tailshaft on this transmission has a different bolt pattern for the Hurst shifter plate.Ford part # D0ZZ-7003-H, Ford casting # RUG-AZ1.
Availability: Out of Stock
Item #: 10945 -
Original equipment 4 speed top loader transmission from a 1970 Mercury Cougar with engine code Q 428 Cobra Jet. Additionally 1971 Mercury Cougar with engine code J 429 Cobra Jet and engine code C 429 Cobra Jet. Transmission code 6 on the door tag, this would be a close ratio 4 speed transmission with a 2.32 ratio first gear. The tailshaft on this transmission has a different bolt pattern for the Hurst shifter plate.Ford part # D0ZZ-7003-H. Casting numberRUG-AZ or RUG-AZ1.*NOTE* Technically...
Availability: Out of Stock
Item #: 11064 -
Original used plastic upper radiator seal for 1971-73 Mercury Cougar and Ford Mustang with 26 inch radiators. Also called a radiator air deflector. Also fits 1970-71 Torino, Ranchero, Cyclone and Montego. As well as 1970-72 full sized Ford and Mercury cars. Comes with 4 original spring clips for mounting. Clips are not sold separately. Plastic portion is about 24 inches long. Replaces Ford part number D0OB-8B170-B.
Featured!
Availability: Out of Stock
Item #: 32748 -
New old stock power window switch, replaces the all of the switches for 1969 and very early 1970. Master switch panel and individual door and rear windows. Replaces C9AZ-14529-D switch. Stamped C8AB-14529-A. This is the 1 tab switch. However, for most of 1970 and through 1972, these will not work in the master power window switch panel. That switch is also available, see related products tab.
Availability: Out of Stock
Item #: 25837 -
NOS Ford key blank for ignition and doors.C7AZ-622053-A Sold Individually. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in...
Availability: Out of Stock
Item #: 25825 -
Availability: Out of Stock
Item #: 53206 -
[No Description Provided]
Availability: Out of Stock
Item #: 25853 -
NOS Ford key blank for trunk and glove box.Sold Individually. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but...
Availability: Out of Stock
Item #: 25835 -
This is our heater cable for use with Mercury Cougars and Ford Mustangs with factory equipped A/C. The best part, its NOS, so you know it will fit right the first time! Ford part # C9ZZ-19988-A.
Availability: Out of Stock
Item #: 25734 -
C9AZ-14527-A1 Used on Galaxie starting in 1969. Mustang used this bezel in 1971-1972.
Availability: Out of Stock
Item #: 11031 -
D0AZ-62234A24-B New Old Stock power window regulator gear replacement kit. Fits 1969-73 Mercury Cougar and 1971-73 Ford Mustang. Doors and quarter windows.