All Available Parts - 1970 Mercury Cougar

Upholstery components have an ETA of 10 - 12 weeks.Door Tag Trim Code: FA. White XR7 Vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.

Upholstery components have an ETA of 10 - 12 weeks.Door Tag Trim Code: 6G. Medium Green XR7 vinyl upholstery to cover the rear seat.*NOTE* This product will take 4 – 6 weeks for delivery.

Not the correct wood grain for a Cougar.... Here is a piece that will allow to install a modern DIN radio / CD player into your Mercury Cougar or Ford Mustang. No hacking or cutting required! *TRIVIA* Here's some alphabet soup for you. DIN stands for Duetch Industri Normen. An abbreviation for a standard in-dash radio measurement which is approximately 2 inches by 7 inches. The Germans starting using it to standardize the radio's in Audi's, BMW's, Mercedes, and VW's way back in the mid 80's....

A quality reproduction black vinyl top that looks and fits great. This top has the correct pattern, however the finish is a bit shinny and will not look original to the discriminating eye. This top will also have a seam in the A pillar.

Reproduction stainless steel fuel tank to pump two piece fuel line with 5/16" fittings for the Mercury Cougar.  *NOTE* All of our tank to pump fuel lines come "gently" folded over to be shipped.  When you receive your fuel line, you will have to straighten it out. It is a fairly straight forward procedure and we have not had anyone struggle with this to date.

This is the replacement for the factory radiator for Cats without Air Conditioning. (3 Core Pictured.) If you have the Cleveland motor, we highly recommend going with the 24" radiator as it does a much better job of keeping your cat running cool. Manufactured with pride in the U.S.A. *NOTE* We do not recommend using a four core as it makes fitting the original shroud very difficult, places the fan closer to the radiator and does not fit well where the bottom tank meets the core support on some...

This is the heavy duty cooling brass core radiator for the big block cats for 1967 - 1970. It also fits the 1970 with the 351C or 351W with Air Conditioning, or the need for heavy duty cooling. Note that the 67 390 Cougar actually used a slightly narrower radiator then this one. If you install this in a 67 you will need the 68-70 lower mounting brackets and a 68-70 shroud. *NOTE* We do not recommend using a four core as it makes fitting the original shroud very difficult, places the fan closer...

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

This is a reproduction long front and rear floor pan. Will work for 67 - 73 Cougars and Mustangs. There were small differences such as drain holes / no drain holes etc. between the years, but this will work for all years.

Reproduction high pressure hose that goes from the control valve to ram cylinder for the Mercury Cougar or Ford Mustang. Ford updated this hose for the 1970 model year and uses the same part number as the early hoses, but with a double crimp. This unit features all of the correct ribbing, striping and crimping. Hose with 5/16 fittings used 1970 Mercury and Ford.*NOTE* Two different hoses attach between the control valve and the ram cylinder, PS7U8B and PS4U8A.Replaces Ford part...

Reproduction high pressure hose that goes from the ram cylinder to control valve for the Mercury Cougar or Ford Mustang. Ford updated this hose for the 1970 model year and it uses the same part number as the early hoses, but with a double crimp. This unit features all of the correct ribbing, striping and crimping. Hose with 5/16 fittings used 1970 Mercury and Ford. *NOTE* Two different hoses attach between the control valve and the ram cylinder, PS7U8B and PS4U8A. Replaces Ford part...

High pressure hose from the insulator to the control valve. All correct ribbing, striping, and crimping. Has correct colored protective sheathing.  This hose is factory correct for the 1967-68 390, 427 and 428 & 1969-70 302, 351, 390 and 428. This hose can also be used to reroute the 1967-68 289 and 302 to the big block routing when paired with the other 3 hoses needed (C9OZ-3A319-A, C8ZZ-3A713-A, C7AZ-3A005-A) and the 69-70 power steering hose bracket (C7ZZ-3C510-A and...

D0ZZ-3A719-G Upper pressure hose. High pressure hose from the pump to insulator. 1970 Mercury Cougar Ford Mustang with Boss 302 or 351 V-8 engines. All correct ribbing, striping, and crimping. Has correct colored protective sheathing. Stamped with D0ZA-3A719-D. *Note - There are two halves to the pressure hose from the pump to the control valve. This is the upper half only. Please see the various part numbers for the lower section of pressure hose. Click this link for more clarity on power...

C8ZZ-3A713-A Return or low pressure hose. Low pressure hose from the control valve to insulator. 1968-70 Mercury Cougar Ford Mustang all V-8 engines. All correct ribbing, striping, and crimping. Has correct colored protective sheathing. *Note - There are two halves to the low pressure hose from the control valve to the pump. This is the lower half only. Please see part number 42301 for the upper section that works with this hose.Click this link for more clarity on power steering...

High pressure hose from the pump to insulator. All correct ribbing, striping, and crimping.*Note - There are two halves to the pressure hose from the pump to the control valve. This is the upper half only.Stamped with C9ZA-3A719-A.Click this link for more clarity on power steering hoses:https://secure.cougarpartscata... ...

Pair of correct power steering hoses for your 67-69 Cougar or Mustang. All correct ribbing, striping, and crimping. Hoses have 5/16" fittings. *Note - Two different hoses attach between the control valve and the ram cylinder. Part numbers: D0ZA-3A714-AAD0ZA-3A717-AA

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Late 1970 Mercury Cougars, these have both a bolt attaching rear flex hose and vent tube. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too...

This intermediate OE-style steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose in the rear of the car. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back.  Not for Mustang as the Mustang had a shorter wheel base than Cougar.  Line is too long to economically be shipped without bending it over, carefully straighten it out prior to...

This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Early 1970 Mercury Cougars, built with 1969 rear axle. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped...

This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Early 1970 Mercury Cougars built with 1969 rear axles. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped...

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Early 1970 Mercury Cougars built with 1969 rear axles. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped...

This intermediate style Stainless Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for Late 1970 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

This intermediate style Carbon Steel line attaches to the transmission tunnel and connects the brass distribution block in the front to the flexible brake hose at the rear of the car. This version is for all Late 1970 Mercury Cougars. Application does not change if the front is drum or disc in the front, all Cougars 1967-1973 came with drum in the back. Not for Mustang as the Mustang had a shorter wheel base than Cougar. Line is too long to economically be shipped without bending it over,...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. *NOTE* This product will take 4 – 6 weeks for delivery.

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 4 – 6 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 6 - 8 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 6 - 8 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks. A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.*NOTE* This product will take 6 - 8 weeks for delivery.               ...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium blue for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium green for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 10 - 12 weeks. Reproduction comfortweave vinyl interior upholstery kit in medium blue for the front seats of the Mercury Cougar. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and is specific to either the coupe or convertible. *TRIVIA* Did you know that after 1971 Ford started calling the comfortweave inserts knitted inserts? ...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in black for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the front and rear seats. The front seats upholstery kit set will fit both the coupe and convertible, but the rear seat is different and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium brown for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in white for the front seats of the Mercury Cougar. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and is specific to either the coupe or convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in white for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 10 - 12 weeks. Reproduction comfortweave vinyl interior upholstery kit in medium brown for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible. *TRIVIA* Did you know that after 1971 Ford started calling the comfortweave inserts knitted inserts? ...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in dark red for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in white for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium blue for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium green for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in black for the front seats of the Mercury Cougar. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and is specific to either the coupe or convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in dark red for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 10 - 12 weeks. Reproduction comfortweave vinyl interior upholstery kit in dark red for the front seats of the Mercury Cougar. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and is specific to either the coupe or convertible. *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in white for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium green for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium brown for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium blue for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in black for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct...

Upholstery components have an ETA of 10 - 12 weeks. Reproduction comfortweave vinyl interior upholstery kit in medium green for the front seats of the Mercury Cougar. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and is specific to either the coupe or convertible. *TRIVIA* Did you know that after 1971 Ford started calling the comfortweave inserts knitted inserts? ...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium green for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in medium brown for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in medium blue for the Mercury Cougar convertible. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the convertible only.*NOTE* This comfortweave kit would not be considered concours correct because it...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in black for the front bucket seats of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe. *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks. Reproduction comfortweave vinyl interior upholstery kit in black for the rear seat of the Mercury Cougar coupe. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the coupe. *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in white for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction comfortweave vinyl interior upholstery kit in dark red for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of Cougar coupe and convertible, the rear seat is a different animal altogether and will only fit the rear seat of the convertible.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the...

Upholstery components have an ETA of 10 - 12 weeks.Complete reproduction comfortweave vinyl interior upholstery kit in dark red for the Mercury Cougar coupe. This is the complete vinyl interior upholstery kit which includes the vinyl upholstery for the front and rear seats. The front seat set will fit both the coupe and convertible, but the rear seat is a different animal and will fit the coupe only.*NOTE* This comfortweave kit would not be considered concours correct because it lacks the...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction vinyl comfortweave interior upholstery kit in black for the rear seat of the Mercury Cougar convertible. While there is no difference between the front seats of convertible Cougar, the rear seat is a different animal and will not fit the rear seat of the coupe.  *NOTE* This comfortweave kit would not be considered concours correct because it lacks the correct perforation in the inserts. This is the closest thing we offer to...

Upholstery components have an ETA of 10 - 12 weeks.Nothing captures the feel of 1970 like the hounds-tooth pattern that once again has become fashionable... Now this ultra cool material has been correctly reproduced and we are the first to offer it in a pre-sewn ready to install kit. The houndstooth option was available on both decor and XR7 Cougars and also was available on the Eliminator in black and white only. Houndstooth cloth interior was never offered in a convertible from the factory,...

Upholstery components have an ETA of 10 - 12 weeks.Reproduction Houndstooth upholstery kit in black and white for the front and rear seats of the Mercury Cougar coupe.*NOTE* This product will take 16-18 weeks for delivery.

Upholstery components have an ETA of 10 - 12 weeks.Nothing captures the feel of 1970 like the hounds-tooth pattern that once again has become fashionable... Now this ultra cool material has been correctly reproduced and we are the first to offer it in a pre-sewn ready to install kit. The houndstooth option was available on both decor and XR7 Cougars and also was available on the Eliminator in black and white only. Houndstooth cloth interior was never offered in a convertible from the factory...

Reproduction pair of LED bulbs sold as an add-on to our existing kit. If you have a 67 - 70 XR7, you will need this pair of LED's for the clock. These bulbs can also be used for the oil gauge, the 67 - 68 rear console light and the courtesy lights on your door panels.  Replaces bulb number 1891 or 1895

Used electrical wiring harness that plugs into the main under dash loom. Two wire harness with light socket and shroud for all 1969-70 Mercury Cougar. This can be made to work on a Mustang. Ford number C9WB-14412-A printed on the wire harness.Fits 69 CougarFits 70 Cougar

Used small wiring harness with light socket that illuminates the under dash ashtray on 1970 Mercury Cougars without console. Takes a 1445 bulb, which is sold separately. This light should work on a Mustang, since they used the same ashtrays.Ford part # D0WB-13A726-A.

Used small wiring harness with light socket that illuminates the ashtray on 1970 Mercury Cougar and Mustang with console. Takes a 1892 bulb, which is sold separately. Ford part # D0ZB-13A726-A.

Used wiring pigtail with light socket for illuminating the heater and air conditioning controls on Mercury Cougars and Ford Mustangs. Tested and is ready to install. Includes the clip for securing wire to the control housing. Bulb 1445 sold separately.Ford part number C5AB-18541-A

These courtesy lights are located on the very outer right and left under the dash. Sold individually, this is the passenger side version. We inspect for damage, clean contacts, and test. These are 1970 model only courtesy lights with unique lamp. Right and left are basically the same, the driver side version has a bend in the metal mounting bracket.  Plus they have the part number stamped on them.Replaces Ford part number D0ZB-13707-C.Fits: 1970 Mercury Cougar 1970 Ford Mustang ...

New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color. No modifications are required to use these LED's. You can also get diffusers in blue, red, and yellow. NOTE: THESE LED'S ARE NOT DIMMABLE. XR-7 owners: You will also need these two extra bulbs for your clock. ...

Reproduction pair of LED's sold as an add-on to our existing kit.

Reproduction wiring harness with light socket that illuminates the under dash ashtray on 1970 Mercury Cougars and Mustangs without console. Takes a 1445 bulb, which is sold separately. Replaces Ford part # D0WB-13A726-A.

These courtesy lights are located on the very outer right and left under the dash. Sold individually, this is the driver side version. We inspect for damage, clean contacts, and test. These are 1970 model only courtesy lights with unique lamp. Right and left are basically the same, one has a bend as shown. Plus they have the part number stamped on them.Replaces Ford part number D0ZB-13K705-C.Fits: 1970 Mercury Cougar 1970 Ford Mustang ...

Reproduction LED version of the under dash courtesy light located on the very outer right and left under the dash. Although the originals had very slight differences between left and right, this reproduction is good for both sides.  Includes LED bulb. Sold individually, 2 per car required. Replaces Ford part numbers D0ZB-13707-C and  D0ZB-13K705-C

Most accurate engine air cleaner decal available for 1970 Boss 302 Eliminator or Mustang. Identified with the Ford part number D0ZF-9C611-C.

Easy to install quality reproduction. Sorry, aqua is not available at this time. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a...

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part #C8AZ-6223352-GR *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small...

Easy to install quality reproduction. Includes crescent spring and correct aluminum pin that features shoulder and locking knurls. Fits 1968-71 cars and about 1 month into 1972. Please see the window crank handles to see the difference between 1968-71 handles and 1972-73 window crank handles. Replaces Ford Part # C8AZ-6223352 *TIP* To install remove your window crank and place knob and crank in the jaws. To protect the knob you will want to place a clean rag over the jaws. Place a small socket...

Perfect fit, great reproduction. These plastic discs are found on all 69-70 convertibles on the rear of both decor and xr7 interior levels. We are unclear as to all the "exact" applications on all years and models but one application we have verified is the fronts of 1971 - 73 Cougars equipped with standard interior. The reason the standard interior 71-73 Cougars came with these is that the door panels were very thick on the 71-73 decor / XR7 models and quite thin on the standard models and...

Complete Chrome Handle and metal bracket with rubber bumper assembled. Exact reproduction ready to bolt on. Replaces Ford Part Number C9ZZ-6522600.

Complete Chrome Handle and metal bracket with rubber bumper assembled. Exact reproduction ready to bolt on. Replaces Ford Part number C9ZZ-6522601.

Complete Chrome Handle and metal bracket with rubber bumper assembled. Exact reproduction ready to bolt on. Replaces Ford Part number C9ZZ-6522600 on the right and C9ZZ-6522601 on the left.

Our used handles do not come with this linkage part so if yours is missing this is what you need. Comes with mounting screw as shown.

Made in America using original Ford tooling. No excuses, premium quality part. Right is the same as left.

This used button comes with the original spring and rubber grommet as shown. Our new door handle kits do not come with the spring shown here so if you need these small items to complete your handle assembly this is the listing for you! Also fits Torino, Ranchero.

Our used handles do not come with this linkage part so if yours is missing this is what you need. Comes with mounting screw as shown.

This is a good reproduction of the original Ford part designed to fit Cougars, as well as many Lincoln / Mercury / Ford products such as the 1970-71 Torino, Cyclone, Ranchero, Falcon / Cobra. THESE ARE NOT THE SAME AS MUSTANG!Ford part # C6OZ-6222404-A.

This is a good reproduction of the original Ford part designed to fit Cougars, as well as many Lincoln / Mercury / Ford products such as the 1970-71 Torino, Cyclone, Ranchero, Falcon / Cobra. THESE ARE NOT THE SAME AS MUSTANG!Ford part # C6OZ-6222405-A.