New black plastic access plug as found on most all 1971-73 Mercury and many other Ford cars starting in 1970. It only comes in black, the color can be changed with the appropriate color of interior paint. This is a near match to the originals that have become chalky over time. It does come with a...

This is the seat belt bezel located on the rear interior panel on your 72 - 73 Cougar or Mustang. Without it, your belt would retract back into the panel and you'd have to remove the whole thing just to get to the belt again. These bezels are very hard to come by, and we have yet to find anyone...

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

Reproduction seat divider insulation pad. Made from ABS plastic with a foil type backing and a layer of jute in between. Designed to fit with very little trimming, this divider will suppress excess noise coming from the rear of the car.

This desirable option was used only on the driver side seat of the LATE 71-73 Cougar and Mustang. This is for seats that have the seat release knobs on the outsides of the seats. The early 71's had the release in the center of the seat. It can be installed on the passenger side with no...

Now you can replace this original part, which is commonly stripped out, with a nice reproduction. Must be welded to floor pan. 6 total per car, 2 inboard in the transmission tunnel, and 4 on the rear seat pans. The front outboard anchors are part of the rocker rails. Rectangular shaped like...

This is the stainless steel trim for the front of the boot that attaches to the upper, back side of the back seat in a 1971 to 1973 Cougar and Ford Mustang. This is a very hard part to come by in good shape.

Good used platform that is unique to the convertible. This will have a couple of thin spots but will be functional as is with all four mounting areas in good condition. This part is rarely in stock due to the lack of convertible parts cars with usable floor parts.

Good used platform that is unique to the convertible. This will have a couple of thin spots but will be functional as is with all four mounting areas in good condition. This part is rarely in stock due to the lack of convertible parts cars with usable floor parts.

In addition to fastening your door panels to the doors, these spring clips are also used to fasten your pads to the console on 67 - 68 models and seat backs to seats 67 - 70. Coated to prevent rust. Sold Individually. These do not hold as well as our originals but do function fine for most...

This is the decal used on the button of the female seatbelt buckle. Each seatbelt uses one of these. Sold as a Pair. Replaces Ford Part #: C8AZ-65611C02-A. Check out our video "All about seat belts" below. ...

Do you want to "feel your music", but don't what a big clunky box in your trunk or back seat? We have what you need! Designed and manufactured specifically for 'under seat' or horizontal 'wall' installations. Compact units with one 5" woofer and piezo tweeter in each enclosure. Under seat fit for...

Want a little more from your hidden speaker system? This is it! The UNDERCOVERII was developed with an 8" woofer and 2 Piezo tweeters in each box. This system can be mounted in many of the same locations as the regular UNDERCOVER. With the 8" woofer in UNDERCOVER II, you get a much fuller, deeper,...

Fits 1967 - 1973 Standard or XR7. Pins not used on 71-73 buckets.

Fits 1967 - 1973 Standard or XR7

This is the rubber spacer / washer that goes between the bolt head and the metal washer of your seat belt hardware. The purpose of the rubber washer is to dampen any vibrations caused by the movement of the seat belt.Sold individually# 354959-S

Concours correct for 67, but a nice dress-up item for 68-73. Replaces Ford Part # 382627 Four bolts, four washers and eight rubber washers in mounting kit.

Reproduction steering gear or seat belt washer for the Mercury Cougar or Ford Mustang. These units are sold individually.Replaces Ford part # 378580-S.

These are often cracked or collapsed causing your seats to lean back too far. One kit does one seat, two kits required per car.*NOTE* Don't discard your original screws! The screws supplied with this kit have a head that is just slightly smaller than original so when you really tighten the...

Core driver side (left hand) bucket seat frame with center seat release for the Mercury Cougar or Ford Mustang. This unit is the same driver to passenger side. The foam almost will always be deteriorating, or even missing, and will need to be recovered. These will be solid core frames taken...

Core passenger side (right hand) bucket seat frame with center seat release for the Mercury Cougar or Ford Mustang. This unit is the same driver to passenger side. The foam almost will always be deteriorating, or even missing, and will need to be recovered. These will be solid core frames...

Core driver side (left hand) bucket seat with the side seat release lever for the Mercury Cougar or Ford Mustang. The foam almost will always be deteriorating, or even missing, and will need to be recovered. These will be solid core frames taken from a Western parts car. Seat tracks are sold...

Replaces Ford part #D1ZZ-6561692. Sold as a pair, available in black only. They can be painted but it is rather difficult to get paint to adhere long term. We have most colors available used, contact us for availability.

American Cushion Industries' cushions are reinforced with tough polypropylene mesh backing material for stability and long life. All of their products, including highback cushions are molded with their exclusive cold cure process.

Shoulder harness bolt cover. This also holds seat belt buckle when it is not in use. Fits Left Hand or Right Hand side of the car. 2 required per car, sold individually. Below are some examples of originals in cars from our wrecking yard: ...

This never came on a Cougar, but it is a nice upgrade from the string that attaches your seat belt shoulder strap to the coat hanger when the shoulder strap is not in use. Fits all models except convertible. Originally, the shoulder strap connected to the bolt cover on one end, And to a string on...

Used in multiple applications front and rear lap belts. Inner and outer, marked with a letter "B" in at least three known fonts.

Two per car, identified with the letter "D" in three known fonts. This bolt was used in conjunction with a chrome spacer / washer that is also marked with the letter "D".

Used on inner and outer rear seat belt bolts, four per car in 1970 -1971 and used only on the inner rears in 72 - 73 due to the addition of rear retractors. Used in conjunction with two red washer / spacers, marked with three known font styles of the letter "A".

Used on front re-tractors, two per side on either side of the re-tractor mounting hole. Used to prevent rattles.

Used seat belt bolt washer for the Mercury or Ford.

Often you will see minor irregularities in these washers. These would be considered "blems". Two required per car, used only on the re-tractors.

These spacer / washers were used on the rear belts of 1968 - 1973 Cougars. 1968 used two per bolt for a total of eight, 69-71 used one per rear belt for a total of four and 72-73 used one per belt on the inner only as the outer belts had a re-tractor in the rear 72-73. They were red to guide the...

The knobs for the seat track release to adjust the position of the seat. The reproduction has a slightly deeper divot where you place your finger, and is slightly more round on the bottom, but a very nice reproduction. Replaces Ford Part #: C5AZ-6261753-BA.

Good used lever side track for all 1971-73 Mercury Cougar and Ford Mustang. These have been carefully inspected for cracks and bends. Will need to be repainted. Ford master part number D1ZZ-6561704-A.*Note - Not compatible with the power seat option.

Good used non-lever side track for all 71 - 73 Cougar and Mustangs. These have been carefully inspected for cracks and bends. Will need to be repainted. Ford master part number D2ZZ-6561705-A.*Note - Not compatible with the power seat option.

D1ZZ-6561828-A Good used replacement spring for the bucket seat tracks on all 1971-73 Mercury Cougar and Ford Mustang Bucket seat sliders. This is the spring on the lever side.

D1DZ-6561883-A Spring that keeps tension on the adjusting seat track latch, it keeps it locked. 1971 - 1973 Mercury Cougar and Ford Mustang Bucket Seats. We think that this later spring for the 1972 and up seats was a service replacement part.

The RetroBelt 3-Point, retractable seatbelt kits feature all chrome, aviation style buckles and hardware.These safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. The black and blue versions feature a black retractor unit.

The RetroBelt 3-Point, retractable seatbelt kits feature all chrome, aviation style buckles and hardware.These safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. The black and blue versions feature a black retractor unit.

The RetroBelt 3 Point, retractable seat belt kits feature all chrome, aviation style buckles and hardware.These safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. The black and blue versions feature a black re tractor unit. Check out our video...

Includes one lap belt, the mounting bolts and washers.sold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors. Sold individually

Great looking replacement style seat belt. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors. These are great lap belts for convertible cars that don't use retractors. We suggest using seat belt anchor bolts for an easy installation of these...

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colorssold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.sold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.sold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.sold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.sold individually

Great looking replacement style seat belts. All feature a mid sixties period look which includes a chrome buckle. Available in a variety of colors.sold individually

These are era-correct looking seat belts at an affordable price.  These are not Concours reproductions, but have the correct vintage look used by Ford on multiple cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals.Sold individually Includes: 1...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!Sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!Sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!sold individually ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included! sold individually ...

This is an original looking seat belt at an affordable price. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included! SOLD INDIVIDUALLY ...

These are original looking seat belts at affordable prices. These are not Concours reproductions, but have the correct vintage look used by Ford on several cars in the Mid to Late 1960's. Starburst Medallion used on the buckle is an exact copy of originals. Hardware included!Sold individually ...

Very nice reproduction knobs for 1971-73 Mercury Cougar and Ford Mustang with outboard mounted seat back releases. Also fits 1971 and newer Mercury Comet and Ford Maverick with bucket seats, as well as 1971 and newer Pinto. *Note - Not to be confused with the center mounted release knobs. ...

Keep Yourself firmly planted in your seat with this retractable shoulder belt. These aftermarket shoulder belts help bring another layer of protection to you while driving your classic. Features inertia locking when the car stops quickly. Although these belts are nice aesthetically, they do not...

The RetroBelt 3 Point, retractable seat belt kits feature all chrome, aviation style buckles and hardware.These safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. The black and blue versions feature a black retractor unit. Although these belts are...

The RetroBelt 3-Point, retractable seatbelt kits feature all chrome, aviation style buckles and hardware.These safety belt systems are federally approved and meet or exceed Federal Motor Vehicle Safety Standards. Although these belts are nice aesthetically, they do not work very well. The black...

Are you looking to replace or upgrade your complicated 1968-73 3 Point Seat Belts with a modern easy to use factory looking Belt? These 3 Point Seat Belts will bolt onto any 1968-73 Coupe using your existing mounting hardware. The belt buckles are very similar to the original starburst buckles...

Are you looking to replace or upgrade your complicated 1968-73 3 Point Seat Belts with a modern easy to use factory looking Belt?  These 3 Point Seat Belts will bolt onto any 1968-73 Coupe using your existing mounting hardware. . The belt buckles are very similar to the original starburst...

Are you looking to replace or upgrade your complicated 1971-73 3 Point Seat Belts with a modern easy to use factory looking Belt? These 3 Point Seat Belts will bolt onto any 1971-73 Coupe using your existing mounting hardware. . The belt buckles are very similar to the original starburst buckles...