Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Manual Transmission Components

Ford Clutch Parts MPC Diagram

Top Loader three and four speed transmission parts can be found here including clutch parts. We also have some Five speed conversion parts listed.


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 289-336 of 361
Price: $1,293.89

Buy Details

Availability: Out of Stock
Item #: 25704 -

RUG-M2 Original equipment 4 speed top loader transmission from a 1968 Mercury Cougar with engine code S 390-4V only. Transmission code 5 on the door tag, this would be a wide ratio 4 speed transmission with a 2.78 ratio first gear. Ford master part number C7ZZ-7003-C.Percentages of Cougars equipped with a manual transmission by year1967 = 18.5%1968 = 13.2%1969 = 10.5%1970 = 7.8%1971 = 2.8%1972 = 1.5%1973 = 0.7%Total for 1967 to 1973 = 10.1% (Mustangs for the same time frame were...

Price: $191.75

Buy Details

Availability: Out of Stock
Item #: 41499 -

1969 Ford four speed shifter rebuild kit. Kit includes tension spring, steel clip, threaded machined shaft, pair of roll pins, pair of dowel pins, and two bolts. Information indicates that all 1969 4 speed shifters are the same across all car lines and for all engines. Link to the Ford shifter linkage expert. Check out our video on rebuilding your shifter below: ...

Price: $11.45

Buy Details

Availability: Out of Stock, On Order
Item #: 41533 -

This is a modern upgrade to your manual transmission cars. It replaces the bushing that is in the crank shaft. Supports the tip of the input shaft of the transmission. Quality part with roller bearings on the inside, fits small block only.Replaces Ford Part #: C7AZ-7600-A.

Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 25836 -

C6OZ-7A533-C. Clutch Pedal Rod To Firewall Seal. Much better than repro. Also fits 1966 Mustang / Fairlane / Comet and others.

Price: $675.00

Buy Details

Availability: Out of Stock
Item #: 31760 -

C8ZZ-7400-D4Assembly 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang. Small block 289 and 302 engines only. Includes shifter mechanism, shift rods, and shift lever. All in used condition. May be either large or small trunion. Subject to availability. Check out our video on rebuilding your shifter below: ...

Price: $358.88

Buy Details

Availability: Out of Stock
Item #: 11734 -

Get a grip with this very rare find! This used original Hurst T handle, or shifter handle, is a one year only unit with no set-screw as found on the 1970 shifter. Ford part # D1OZ-7213-A. Check out our video on rebuilding your shifter below: ...

Price: $285.89

Buy Details

Availability: Out of Stock
Item #: 30258 -

Very hard to find 69 - 70 Shelby / 68 - 69 Cougar 4 speed shifter knob. These very rarely come up for sale used and when they do they are expensive. Correct for 1968-69 Mercury Cougar XR7 and 1969-70 Ford Shelby Mustang, all with 4 speed manual transmissions. Ford part number C8WY-7113-C. Check out our video on rebuilding your shifter below: ...

Price: $465.89

Buy Details

Availability: Out of Stock
Item #: 20006 -

NOS Real woodgrain knob for 1968 XR7-G Mercury Cougars with the 4 speed only. One RARE little unit! Ford master part # C8WY-7213-A.*TRIVIA* Only 26 XR7-G's were built with a 4 speed transmission. Check out our video on rebuilding your shifter below: ...

Price: $276.17

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41484 -

Factory detailing and triple chrome plating distinguish this tubular shift handles from the rest. Cable and T-lever included. American made for quality workmanship. Replaces Ford Part #: C5ZZ-7210-M. Check out the very first Cougar in our video below! ...

Price: $121.45

Buy Details

Availability: Out of Stock
Item #: 31756 -

Set of reproduction Ford Top Loader 4 speed shift rods for 1967-68 Mercury Cougar or Ford Mustang with 289 or 302 engines only. 

Price: $534.87

Buy Details

Availability: Out of Stock
Item #: 10971 -

Used Hurst built 4 speed manual shift control assembly for the Mercury Cougar or Ford Mustang equipped with the manual transmission. This assembly includes the shifter mechanism, shift rods, and shift lever. The Ford MPC states that this same shifter was used on all V8 Mustangs and Cougars. This unit may be used for the 1971 edition and is in good used condition.Ford part # D1ZZ-7400-B. Check out our video on rebuilding your shifter below: ...

Price: $184.37

Buy Details

Availability: Out of Stock, Discontinued
Item #: 10960 -

C8ZZ-7400-B3Assembly Factory 3 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The 1-2-1968 date was the transition of the stronger trunion for the shifter mounting. The Ford MPC states that this same shifter was used on 6 cylinder Mustangs and all V8 Mustangs and Cougars as large as the 390-4V engine. Check out our video on rebuilding your shifter...

Price: $77.85

Buy Details

Availability: Out of Stock
Item #: 10979 -

3 Speed manual transmission shift control assembly for any 1969 Cougar or Mustang. Control assembly only, no rods or chrome lever. C9OZ-7400-B Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 10968 -

C9OZ-7400-B3Assembly Factory 3 Speed manual transmission shift control assembly for any 1969 Mercury Cougar or Ford Mustang. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The Ford MPC states that this same shifter was used on 6 cylinder Mustangs and all V8 Mustangs and Cougars as large as the 390-4V engine. Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 10970 -

D0ZZ-7400-A3Assembly Factory 3 Speed manual transmission shift control assembly for any 1970 Mercury Cougar or Ford Mustang. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The Ford MPC states that this same shifter was used on 6 cylinder Mustangs and all V8 Mustangs and Cougars as large as the 351-4V engine. Check out our video on rebuilding your shifter below: ...

Price: $534.87

Buy Details

Availability: Out of Stock
Item #: 10965 -

C7ZZ-7400-C4Assembly 4 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968. Big block 390 engines only. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The 1-2-1968 date was the transition of the stronger trunion for the shifter mounting. Check out our video on rebuilding your shifter below: ...

Price: $849.87

Buy Details

Availability: Out of Stock
Item #: 10967 -

C8ZZ-7400-C4Assembly 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Big block 390 and 428CJ engines only. Includes shifter mechanism, shift rods, and shift lever. All in used condition. Check out our video on rebuilding your shifter below: ...

Price: $534.87

Buy Details

Availability: Out of Stock
Item #: 10969 -

C9OZ-7400-AAssembly 4 Speed manual transmission shift control assembly for any 1969 Mercury Cougar or Ford Mustang. Includes shifter mechanism, shift rods, and shift lever. All in used condition. The Ford MPC states that this same shifter was used on all V8 Mustangs and Cougars. Check out our video on rebuilding your shifter below: ...

Price: $34.55

Buy Details

Availability: Out of Stock
Item #: 41542 -

Metal core base as original, correct texture. If you have a 1970 with a Hurst four speed then the one with the rectangular hole is correct for the Hurst shifter. Replaces Ford part # C9ZZ-7277-A. Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 24548 -

C8ZZ-7210-A 4 Speed shift lever with round reverse lockout provision. For any 1968 Mercury Cougar and Ford Mustang until 1-2-1968. The early lever can be identified by measuring the distance between bolt holes. 1-13/16" spacing between the holes is the C8ZZ-7210-A lever. *Note - Must be used with Trunion C5ZZ-7210-D, sold separately.

Price: $84.87

Buy Details

Availability: Out of Stock
Item #: 24550 -

C8ZZ-7210-C Shift lever for all Mercury Cougar and Ford Mustangs after 1-2-1968. This 1968 lever can be identified by measuring the distance between bolt holes. 2" spacing between the holes is the C8ZZ-7210-C lever. *Note - Must be used with Trunion C8ZZ-7210-D, sold separately.

Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 24866 -

C9ZZ-7210-A Shift lever for all 1969 Mercury Cougar and Ford Mustangs. Manual 3 speed only, 4 speeds are different. *Note - Must be used with Trunion C9OZ-7210-B, sold separately. Check out our video on rebuilding your shifter below: ...

Price: $237.87

Buy Details

Availability: Out of Stock
Item #: 25235 -

D0ZZ-7210-B Chromed "Hurst" labeled shifter for all 1970 - 1971 Mercury Cougar and Ford Mustangs with factory installed 4 speed transmissions. Tough part to find loose, most will be attached to the correct vintage Hurst Competition shifter mechanism. The 1970 Ford master part number is D0ZZ-7210-B, 1971 is D1ZZ-7210-A. These shifters originally came with the "Hurst" T handles installed. These shifters will not come with a "T" handle. Check out our video on rebuilding your shifter below: ...

Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 25545 -

D2ZZ-7210-A Round chromed �Hurst� labeled shifter for all 1972 and 1973 Mercury Cougar and Ford Mustangs with factory installed 4 speed transmissions. Tough part to find loose, most will be attached to the correct vintage Hurst Competition shifter mechanism. These shifters will not come with the round shifter ball knob. Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 24549 -

C8ZZ-7210-B 4 Speed shift lever with round reverse lockout provision. For any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. The early lever can be identified by measuring the distance between bolt holes. 2" spacing between the holes is the C8ZZ-7210-B lever. *Note - Must be used with Trunion C8ZZ-7210-D, sold separately.

Price: $215.87

Buy Details

Availability: Out of Stock
Item #: 24867 -

C9ZZ-7210-B 4 Speed shifter lever for any 1969 Mercury Cougar and Ford Mustang with V-8 engines. *Note - Must be used with Trunion C9AZ-7210-J, sold separately. Check out our video on rebuilding your shifter below: ...

Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10983 -

D0ZZ-7400-D Hurst built 4 speed manual shift control assembly for any 1970 - 1971 Mercury Cougar or Ford Mustang. Check out our video on rebuilding your shifter below: ...

Price: $72.86

Buy Details

Availability: Out of Stock
Item #: 10472 -

1967 - 1968 Manual 3 Speed Shifter Mechanism - Used C5ZZ-7400-C 3 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968. Check out our video on rebuilding your shifter below: ...

Price: $77.85

Buy Details

Availability: Out of Stock
Item #: 10977 -

C8ZZ-7400-B 3 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Check out our video on rebuilding your shifter below: ...

Price: $77.85

Buy Details

Availability: Out of Stock
Item #: 10982 -

D0ZZ-7400-A 3 Speed manual transmission shift control assembly for any 1970 Mercury Cougar or Ford Mustang. Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 10974 -

C5ZZ-7400-D 4 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968.

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 10976 -

C8ZZ-7400-A 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Check out our video on rebuilding your shifter below: ...

Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10975 -

C7ZZ-7400-C 4 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968. Big block 390 engines only. Check out our video on rebuilding your shifter below: ...

Price: $204.89

Buy Details

Availability: Out of Stock
Item #: 10473 -

Used 4 speed manual transmission shift control assembly for the Mercury Cougar or Ford Mustang.Ford part # C9OZ-7400-A. Check out our video on rebuilding your shifter below: ...

Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10978 -

C8ZZ-7400-C 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Big block 390 and 428CJ engines only. Check out our video on rebuilding your shifter below: ...

Price: $44.87

Buy Details

Availability: Out of Stock
Item #: 10955 -

Adapter plate for mounting the 3 or 4 speed shifter control assembly to the Top Loader transmission.Ford part # C7ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

Price: $44.87

Buy Details

Availability: Out of Stock
Item #: 10954 -

Adapter plate for mounting the 3 or 4 speed shifter control assembly to the Top Loader transmission.Ford part # C9ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

Price: $149.85

Buy Details

Availability: Out of Stock
Item #: 10958 -

Adapter plate for mounting the 4 speed shifter control assembly to the Top Loader transmission.Ford part # D1ZZ-7E046-B. Check out our video on rebuilding your shifter below: ...

Price: $138.87

Buy Details

Availability: Out of Stock
Item #: 25162 -

Ford casting number D0ZA-7E046-E. Adapter plate for mounting the factory installed Hurst 4 speed shifter control assembly to the Top Loader transmission. Mercury Cougar Ford Mustang 351 and Boss 302 engines. Ford master part number D0ZZ-7E046-B.

Price: $182.88

Buy Details

Availability: Out of Stock
Item #: 10956 -

D0ZA-7E046-D Adapter plate for mounting the Hurst 4 speed shifter control assembly to the Top Loader transmission on a 1970 big block 428 cobra jet Cougar or Mustang. Ford master part number D0ZZ-7E046-A. Check out our video on rebuilding your shifter below: ...

Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 10957 -

D1ZZ-7E046-A Adapter plate for mounting the Hurst 4 speed shifter control assembly to the Top Loader transmission.

Price: $36.86

Buy Details

Availability: Out of Stock
Item #: 23890 -

C5ZZ-7210-D "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1967 Mercury Cougar and Ford Mustangs with the 3 or 4 speed shift lever, and 1968 shift levers through 1-2-1968. Bottom bracket only, called a Trunion (see illustration). Measurement of hole spacing is 1-13/16 inches on center. *Note - Must be used with 3 speed shift lever C5ZZ-7210-C, or 4 speed shift lever C5ZZ-7210-M. Check out our video on rebuilding your shifter below: ...

Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 24551 -

C8ZZ-7210-D "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1968 Mercury Cougar and Ford Mustangs after 1-2-1968, with the 3 & 4 speed shift levers. Bottom bracket only, called a Trunion (see illustration). Measurement of hole spacing is 2 inches on center. *Note - Must be used with 3 speed shift lever C8ZZ-7210-C, or 4 speed shift lever C8ZZ-7210-B. Check out our video on rebuilding your shifter below: ...

Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 24637 -

C9OZ-7210-B "U" shaped bracket that attaches the 3 speed shift lever to the shifter control assembly. For use on all 1969 Mercury Cougar and Ford Mustangs with the 3 speed shift lever. Bottom bracket only, called a Trunion (see illustration). *Note - Must be used with 3 speed shift lever C9ZZ-7210-A. Check out our video on rebuilding your shifter below: ...