Lights

These courtesy lights are located on the very outer right and left under the dash. Sold individually, this is the driver side version. We inspect for damage, clean contacts, and test. These are 1970 model only courtesy lights with unique lamp. Right and left are basically the same, one has a bend as shown. Plus they have the part number stamped on them.Replaces Ford part number D0ZB-13K705-C.Fits: 1970 Mercury Cougar 1970 Ford Mustang ...

These courtesy lights are located on the very outer right and left under the dash. Sold individually, this is the passenger side version. We inspect for damage, clean contacts, and test. These are 1970 model only courtesy lights with unique lamp. Right and left are basically the same, the driver side version has a bend in the metal mounting bracket.  Plus they have the part number stamped on them.Replaces Ford part number D0ZB-13707-C.Fits: 1970 Mercury Cougar 1970 Ford Mustang ...

D0AB-13776-A 1970 Right and left lights are the same. They are located on the "C" pillar just above the rear package tray. These plastic housings never really had brilliant shiny chroming. Marked D0AB-13776-A on the wiring, fully interchanges with the 1969 light. Same plug, same diameter opening in the sail panels. Ford master part number D0AZ-13776-A. Grade B will have imperfections and or scratches in the plastic chrome. *Restoration Tip* There are paint manufacturers that offer shiny chrome...

Reproduction LED version of the under dash courtesy light located on the very outer right and left under the dash. Although the originals had very slight differences between left and right, this reproduction is good for both sides.  Includes LED bulb. Sold individually, 2 per car required. Replaces Ford part numbers D0ZB-13707-C and  D0ZB-13K705-C

This plastic socket is very brittle and almost always breaks when installing a new door jamb switches. Does not fit cars with Warning Group with door ajar option. Simply install by carefully breaking the old brittle plastic socket apart with pliers to free up the wire leads and plug wire leads into the new socket.

Used driver side tail light diffuser for the Mercury Cougar. Also called a reflector. Replaces Ford part number C9WY-13A565-B.

Used passenger side tail light diffuser for Mercury Cougar. Also called a reflector, fits all 1969-70 Mercury Cougars.Replaces Ford part number C9WY-13A565-A.

68 - 70 Courtesy Light Switches! These replacement switches are an exact reproduction of the original Ford part. This is the 2 pin type. Includes original Autolite Logo. Many 70 - 73 cars used 3 pin type switches for the optional automatic seatback release feature. Sold individually. Additionally, this switch for the 3/4 inch mounting hole was used on 1968-70 Full sized Ford such as Custom, 500, Galaxie, LTD, and XL models, full sized Mercury such as Monterey, Montclair, Marquis, and Park...

3/4" wide and 60' long. This tape resembles the tape you would find on bicycle handle bars or a hockey stick but is in fact different. The taillight harness uses this type of tape as well as portions of the under dash harness. Not used in modern applications and getting rather hard to find these days.NOTE: This is FRICTION tape not adhesive tape. It is coated with rubber and relies on friction with itself to wrap wires. It does not stick to the wires. This was one of the first types of...

This pair of tail light bezels have been chemically dipped to remove the chrome and are ready to be painted black for your 1970 Resto-Mod or 1970 ELIMINATOR. Keep in mind when an item is chromed, the layer or layers of copper plating act as a primer to fill in minor imperfections. You will have some prep time involved (mostly on the top edge) before these are paint ready. We hand select premium parts that have minimal defects.If you send cores in for exchange they must be pit free and no...

New old stock Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a mercury  switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

After-market exact reproduction of the original Ford over the counter accessory. This handy little lamp can be mounted under the hood or the trunk lid. Features a gravity switch that turns the light on when the lid is raised and off when lowered.  Replaces Ford accessory part #: C2RZ-15A700-A.

Reproduction 22" pigtail for the 67-69 front turn signal wiring harness. Please Note: The Cougars are wired differently than some Mustangs. On some Mustangs the brown wire goes to a male plug.   This plug is a reproduction of the Cougar plug. Here is an example from the reproduction tail light we sell showing the difference: For installation on a Cougar, match up: Black Wire Black Wire Light Blue Wire Light Blue / Off White Wire Brown Wire Brown Wire ...

Reproduction halogen headlight conversion kit. Included in this kit are the four halogen headlight bulbs (2 high and 2 low) and the mini-relay kit, which is needed when installing halogen bulbs on your 69 - 73 Cougar. Bulbs included in this kit are "cool white" which actually have a bit of a blueish tint to them. If you would like to go with a more original "natural white" color, you can buy the inner replacement bulbs. This kit comes with the 'mini' relay kit which is designed to handle...

Reproduction replacement halogen bulb for your headlights. This is a clear bulb, "natural white" alternative to the "cool white" bulbs included in our halogen headlight conversion kit. 55 Watt Xenon Halogen H4/9003 bulb. Sold Individually.

Used random brand 4001 high beam headlight for the Mercury Cougar. High beam headlights are distinguished by the number 1 at 12 o'clock position and the 2 prong connection on the back. We guarantee these units to work. Basic Ford part # 13007-B.

*NOTE* If you're going to make your car concours correct, you need to specify which year you have (bulbs are date marked), otherwise we'll just send you any random FoMoCo bulb.Please note that we are out of date coded bulbs for 1969 and up. If ordering online, leave the info in the comments section of your order. If your order is being done over the phone, be sure our rep knows which year you have. This is the much easier to find inner, high beam lamp distinguished by the number 1 at 12...

Reproduction 4001 incandescent (non-halogen) high beam light bulb for the 1967, 1968, 1969, 1970, 1971, 1972 and 1973 Mercury Cougar. Plugs right in to the factory 2-prong plug and mounts in the inboard position on the car.These are OEM wattage (50 watts) to work with the factory headlight switch, without the need to add relays like you would for higher wattage halogen bulbs.Replaces bulb number 4001. Sold individually, 2 required per car.

Reproduction pair of halogen headlights for any 67 - 73 Cougar or Mustang. These bulbs work for both high and low beam, you simply need to bend one of the tabs back for high beam (see photo above). Keep in mind that you will need a headlight relay kit when installing halogen headlights on your car.  Benefits of switching to halogen bulbs: Brighter lightDramatically improves driver visionOptical lens for a powerful beamLong range high powered lightsCrystal clear glass face with H4 halogen...

Used random 4000 or 4002 brand low beam headlight for the Mercury Cougar. Low beam headlights are distinguished by the number 2 at 12 o'clock and the 3 prong connection on the back. We guarantee these units to work. Replaces basic Ford part # 13007-B.

*NOTE* If you're going to make your car concours correct, you need to specify which year you have (bulbs are date marked), otherwise we'll just send you any random FoMoCo bulb.Please note that we are out of date coded bulbs for 1969 and up.  If ordering online, leave the info in the comments section of your order. If your order is being done over the phone, be sure our rep knows which year you have. This is the much harder to find outer, low beam lamp distinguished by the number 2 at 12...

Converting your headlight wiring to a modern relay type is probably one of the best 'bang for the buck' mods you can do to your classic car. A must when using modern halogen bulbs, it will also brighten your original incandescent headlights. Normally this is done by cutting the main wiring harness and splicing in a pair of relays. Most of us try to hide the relays under or behind something as well. Not only is this a time consuming task, it can be troublesome if a connection or component fails...

The Mini Relay Kit has everything you need to add relays to your headlight circuit - without cutting your wiring harness. It is equivalent to installing relays into your main harness like it was done for years, but requires no modification to the wiring harness. The differences between this kit and the full kit are redundancy and controller size. This kit has only one controller with two relays designed to handle up to a maximum of 200 combined watts and uses a wiring harness to control...

Used driver side (left hand) taillight housing for the Mercury Cougar. Thinking about adding some LED taillight bulbs to your car? Here is great little video that shows the performance of LEDs and traditional bulbs side by side so that you can make an informed decision.

Used passenger side (right hand) taillight housing for the Mercury Cougar. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. Thinking about adding some LED taillight bulbs to your car? Here is great little...

1970 Mercury Cougar good used housing with only light rust, no broken studs and clean socket and pigtail assembly. 1969 and 1970 have different pigtails so please choose the year you desire (the one shown is 1970). Left is the same as right. Engineering number D0WB-13234-A *NOTE*  This housing fits 1970 Mach 1 sport lamps.**NOTE** Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the...

Available in original blue light diffuser or custom red or yellow for a brighter "custom" look. Please note that depending on the options you have there are different numbers of defusers (filters) needed for different years and models. SOLD AS SET OF FOUR(4). 67 - 68 Cougar Uses 6 - Instrument Cluster (XR7 or Standard) 2 - Clock 2 - Oil Pressure Gauge 69 - 70 Cougar Uses 5 - Instrument Cluster (XR7 or Standard) 2 - Clock ...

Replacement LED light that replaces the 212 bulb for the door courtesy lights on your 69 - 70, or the map lights on the 71 - 73 Cougar. These LED's give a fuller, brighter effect as compared to standard incandescent bulbs.

Reproduction pair of LED's sold as an add-on to our existing kit. If you have a 67 - 70 XR7, you will need this pair of LED's for the clock. These bulbs can also be used for the oil gauge, the 67 - 68 rear console light and the courtesy lights on your door panels.

Reproduction pair of LED's sold as an add-on to our existing kit.

New LED dash light kit for the gauges in your Mercury Cougar. Finally, a kit that will provide you the light you need to see your gauges! Not only are these LED lights 8 times brighter than stock, but they will also provide a true factory color while retaining your dimmer function. No modifications are required to use these LED's. You can also get diffusers in blue, red, and yellow. NOTE: THESE LED'S ARE NOT DIMMABLE. XR-7 owners: You will also need these two extra bulbs for your clock. ...

Grade "A" used backup light lens for driver side 1969 - 70 Cougars. This lens will be free of cracks, chips or scrapes. Ford part number: C9WY-15514-B

Grade "B" used backup light lens for passenger side 1969 - 70 Cougars. This lens will show some wear, and will also have a few minor cracks and scratches. Cracks inside the plastic from stress, not contact. Ford part number: C9WY-15514-B

Grade "A" used backup light lens for passenger side 1969 - 70 Cougars. This lens will be free of cracks, chips or scrapes. Ford part number: C9WY-15514-A

Very nice used milky white lens for all license plate lamp assemblies. No cracks or chips. Good used original OEM lens that can easily be cleaned to look as good as the Chinese reproduction.

Good used map light lens, for either of the metal backed map lights with or without the switch. C9WY-15A650-B or C9WY-15A650-A, map light assemblies.

Unlike the 1970 front side marker lenses we have a good supply of rear lenses in very good condition with and without the studs in place.

Good reproduction with correct "SAE-PIA-70FN" and "Ford" lettering. These have been impossible to find for years now and when you could they were often double the price you see here "if" you could find good used examples. This is a fantastic reproduction that is licensed by Ford. Easy to install, made from quality plastic that will not easily break like the originals often do where the bulb inserts in the back. They measure 3 7/16" x 1 11/16" and when placed face down they measure 1 1/4" high,...

The majority of these 1970 front marker lenses we find have cracks and chips in the back area where the socket twists in place. The easy fix to keep your socket in place on a light with minor damage is to use a product such as Permatex to seal and keep it in place. This used lens has no damage. We do have lenses with minor damage for a substantial savings, please select the quality you desire below. *NOTE* This same lens can be found on other Ford products such as the Torino or Maverick. Each...

Used grade "A" driver side (left hand) taillight lens with no heavy scratches, stress cracks or chips. You will want to put a 1969 lens on your 1969 Cougar and a 1970 lens on your 1970 as 69 and 70 have different vertical rib spacing on the chrome bezels which creates different wear patterns.   Ford part # C9WY-13451-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's...

Used grade "A" passenger side (right hand) taillight lens with no heavy scratches, stress cracks or chips. You will want to put a 1969 lens on your 1969 Cougar and a 1970 lens on your 1970 as 69 and 70 have different vertical rib spacing on the chrome bezels which creates different wear patterns. Ford part # C9WY-13450-A. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our...

Used grade "B" passenger side (right hand) taillight lens with no heavy scratches, stress cracks or chips. You will want to polish the lens to make it look as good as the one we have pictured with Novus, Mequires or another like plastic polish. You will want to put a 1969 lens on your 1969 Cougar and a 1970 lens on your 1970 as 69 and 70 have different vertical rib spacing on the chrome bezels which creates different wear patterns.  Ford part # C9WY-13450-A. *NOTE* Need help diagnosing a...

NOS passenger side (right hand) taillight lens for any 1969-70 Mercury Cougar. Ford part # C9WY-13450-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. Thinking about adding some LED taillight bulbs to your...

1970 Mercury Cougar front turn signal and marker light lens. 1970 used the fluted version, 1969 is clear. 1969 and 1970 lenses do interchange. Good used lens that has no cracks or chips. Ford part # D0WY-13208-A for the passenger side lens, D0WY-13209-A for the driver side.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state...

1970 Mercury Cougar front turn signal and marker light lens. 1970 used the fluted version, 1969 is clear. 1969 and 1970 lenses do interchange. Good used lens that has no cracks or chips. Ford part # D0WY-13208-A for the passenger side lens, D0WY-13209-A for the driver side lens. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state...

This reproduction rear side marker light will fit on either the right or left side of your Cougar.Studs included.Replaces Ford Part #: D0ZZ-15201-R.

Reproduction reverse (back up) light lens set for the Mercury Cougar. These reproductions do not have the Ford insignia, and are therefore cheaper than the other versions on the market. Fit and finish is very good. This set includes the driver side / left hand lens and the passenger side / right hand lens, with correct grey gaskets. Replaces Ford part # C9WY-15514-B (driver side / left hand lens), C9WY-15514-A (passenger side / right hand lens), and C9WY-15510 (gasket...

Sold as a pair, made from original Ford tooling. Show quality with correct FoMoCo logo and numbering, perfect fit. These will fit 1970 Cougar but do not have the same distorted appearance. Applications for 1969 Mercury Cougar, 1969-70 Mustang Shelby GT350 and GT-500. This is also the lens for 1970 Ford Mustang with the sport lamp option. Replaces part # C9WY-13208-A and C9WY-13209-A. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable...