Interior

Four required per seat, eight per car equipped with bucket seats. Actual bolt length is 1-1/2 inches.Sold individually. 

Fits 1967 - 1973 Standard or XR7

Concours correct for 67, but a nice dress-up item for 68-73. Replaces Ford Part # 382627 Four bolts, four washers and eight rubber washers in mounting kit.

Reproduction bolts and washers for the shoulder belts on any 1969-73 Mercury Cougar or Ford Mustang. Includes 2 each of the "D" bolts and chrome thick washers. Quality AMK kit F-3563.

Support brace between the bottom of the steel lower dash panel and the cowl top. Fits 1969-70 Mercury Cougar and Ford Mustang with either air conditioning or without air conditioning. Ford part number C9ZB-6504672-A.

One end attaches to the right of the brake pedal support, and the other to the dash panel. Original Ford part number C9ZB-6504510.

Sold as pair on exchange or outright. Only cores with minimal corrosion can be considered for exchange. Ford part number C7AZ-6204144-A, casting number as seen on the backside reads C8AB-6204122-B.  Does not include smaller rod for the sun visor tips.  Sold as a pair.

Reproduction Sun Visor Bracket & Rod for the 1967, 1968, 1969 and 1970 Mercury Cougar or Ford Mustang. Great quality and fit, left and right use same part, sold separately. Replaces Ford part # C7AZ-6204144-A.

Used mounting tab or bracket, that is embedded into the dash pad below the instrument cluster for attaching the lower dash filler. These can be glued back into the foam with adhesive. Right and left side pieces are different, this one attaches to the lower left side. The companion bracket is also available.

Used mounting tab or bracket, that is embedded into the dash pad below the instrument cluster for attaching the lower dash filler. These can be glued back into the foam with adhesive. Right and left side pieces are different, this one attaches to the lower right side. The companion bracket is also available.

Used lower bracket for installing the rear interior panels on any 1969-70 Mercury Cougar or Ford Mustang convertible. One bracket per side. These brackets will have a bit of dirt and or rust on them, originally painted chassis black. See related upper bracket.Replaces Ford part number C9ZZ-76310A84-A. 

Used lower bracket for installing the rear interior panels on any 1969-70 Mercury Cougar or Ford Mustang convertible. One bracket per side. These brackets will have a bit of dirt and or rust on them, originally painted chassis black. See related upper bracket.Replaces Ford part number C9ZZ-76310A84-A. 

Longer arm than drum brake pedals. Works only with 1970 power brake booster rod. Pedal shipped bare, picture may show hardware and pedal pad with trim. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you...

For use with a clutch pedal. Longer arm than drum brake pedals. Comes with all mounting hardware. Pedal shipped bare without pedal pad with trim.

Core driver side (left hand) high back bucket seat for the Mercury Cougar. In most cases the foam will be less than perfect and will need to be recovered. They will be solid core frames taken from a Western parts car and, from our experience, are MUCH better quality than the Chinese made reproductions on the market. Perfect for a 1969 Eliminator clone or to make your 1967-68 safer and more comfortable. If you are going to use these high backs in your 1967-69 Cougar, your existing seat tracks...

Core driver side (left hand) and passenger side (right hand) pair of high back bucket seats for the Mercury Cougar. In most cases the foam will be less than perfect and will need to be recovered. They will be solid core frames taken from a Western parts car and, from our experience, are MUCH better quality than the Chinese made reproductions on the market. Perfect for a 1969 Eliminator clone or to make your 1967-68 safer and more comfortable. If you are going to use these high backs in your...

Core passenger side (right hand) high back bucket seat for the Mercury Cougar. In most cases the foam will be less than perfect and will need to be recovered. They will be solid core frames taken from a Western parts car and, from our experience, are MUCH better quality than the Chinese made reproductions on the market. Perfect for a 1969 Eliminator clone or to make your 1967-68 safer and more comfortable. If you are going to use these high backs in your 1967-69 Cougar, your existing seat...

Fits RH or LH standard interior, sold individually, two required per car. Has correct grain texture and injection molded exactly like originals. Includes metal clip retainers pre-installed as well as the clips themselves. Available in black only, use any solvent based paint to match the color of your interior. These were used on the 69 - 70 (and some 68) Mustangs but only used in 1970 for the standard model Cougar. Replaces Ford part #: C9ZZ-6560762. ...

Grade A XR7 used bucket seat vinyl trim panel. Available in 1969 1970 interior colors. Please specify in the notes your desired color. Grade A will not have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762. XR7 panels have the map pockets on the back. The elastic may be stretched on these.  We also have B grade used panels...

Grade B XR7 used bucket seat vinyl trim panel. Available in 1969 1970 interior colors. Please specify in the notes your desired color. Grade B will have cuts or tears, there may be slight impressions in the vinyl or a warped backer board. Driver and passenger side are the same, sold individually. Typically these would have had a basic Ford part number of 60762. XR7 panels have the map pockets on the back. The elastic may be stretched on these.  We also have A grade used panels too,...

Used on the majority of Fords, this assembly can easily be removed without cutting or un-stitching the webbing. No rust, grade "A" show quality chrome, originally came stamped ROBBINS - JR - 7600 or HAMILL H-000. If you have a preference as to which version you would like just let us know in the memo box at checkout. Check out our video "All about seat belts" below. ...

Sold as a pair. Two required per car.Replaces Ford Part #: 380239.

Replacement rubber bushing for repairing any automatic shift arms on any 1967-73 Mercury Cougar or Ford Mustang, and most Fords with automatic floor shift levers. Fits arms with 3/4 inch lower holes for attaching transmission shift rods. Replaces Ford part number C7ZZ-7343 Check out our video on rebuilding your shifter below: ...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places.*NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your car...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Click on images to enlarge. Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available...

Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969-70 Cougars did not originally come with a sewn in toe pad like the 1967-68 Cougars. These carpets do in fact come with the toe pad so if you want to be 100% correct with your...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available out there these are the...

Click on images to enlarge. Of the multiple carpets available out there, these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969 - 70 Cougars did not originally come with a sewn in toe pad like the 1967 - 68 Cougars. These carpets do in fact come with the toe pad so if you...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available out there these are the...

Click on images to enlarge. Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969 - 70 Cougars did not originally come with a sewn in toe pad like the 1967 - 68 Cougars. These carpets do in fact come with the toe pad so if you want...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available out there these are the...

Click on images to enlarge. Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969 - 70 Cougars did not originally come with a sewn in toe pad like the 1967 - 68 Cougars. These carpets do in fact come with the toe pad so if you want...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available out there these are the...

Click on images to enlarge. Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969 - 70 Cougars did not originally come with a sewn in toe pad like the 1967 - 68 Cougars. These carpets do in fact come with the toe pad so if you want...

Give your Cougar the added comfort of a extra 5/8" of Heavy padding under the carpeting and almost 30 lbs of Sound Deadening material. The mass backing gives your carpet the plush feel of the carpeting in a new luxury car while adding a great deal of sound deadener to muffle road noise. The mass backing combined with the foil heat shield (Part # 10330) should provide sound deadening equivalent to that of the factory sound deadener. Of the multiple carpets available out there these are the...

Click on images to enlarge. Of the multiple carpets available out there these are the best. These are correctly molded to the contour of your floor pans and have the correct thickness of insulation bonded to the backside. They come with the correct heel pad sewn into the drivers side and have the correct hem in the appropriate places. *NOTE* 1969 - 70 Cougars did not originally come with a sewn in toe pad like the 1967 - 68 Cougars. These carpets do in fact come with the toe pad so if you want...

Used console lid catch. Plastic piece that screws to the underside lid of your late 1970-73 Mercury Cougar or 1970-78 Ford Mustang. Yep, used on Mustang II's, too.  Ford part number D0ZZ-63060A96-B and stamped into the plastic D0ZB-63060A96-B ...

Very correct reproduction, injection molded like original with correct grain surface. Assembly includes; Base with metal support brackets, upper console panel (where shifter plate mounts) with metal retainers, triple-humped lid, insert designed for cars with manual transmission, simulated burl walnut bezel (correct for XR7), front ashtray receptacle & holder with die cast lid and rubber lid bumpers, rear ashtray assembly, 1970 style compartment box with push button lid, hinge for compartment...

Reproduction upper portion to the center console found in the Mercury Cougar or Ford Mustang. This unit is a perfect fit in your Cougar or Mustang and features exact color and texture. It also comes with the front hooks to attach it to the lower base. The center console is a focal point of any cars interior and getting rid of that cracked, broken down old console will make a huge difference! *NOTE* This unit does not come with the ash tray assembly, but they're available used or reproduction. ...

Used upper portion to the center console found in the Mercury Cougar or Ford Mustang.  *When placing your order, please mention in the notes as to which color you need and we will do our best to accommodate. *NOTE* This unit does not come with the ash tray assembly, but they're available used or reproduction. Ford Part Number C9ZZ-6304490 ...

Reproduction Automatic Transmission Center Console With Three Humped Lid for the 1970 Mercury Cougar or Ford Mustang, that does not include the console insert or the faux wood grain.

Reproduction Center Console With Three Humped Lid for the 1970 Mercury Cougar or Ford Mustang with a Manual Transmission.  This console does not include the console insert or the faux woodgrain.