Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-144 of 170
Price: $198.77

Buy Details

Availability: In-Stock Item
Item #: 10882 -

Our service is to rebuild your sending unit. A quality core is required. This rebuilt XR7 fuel sending unit has been meticulously gone through and made operational again. All sending units are taken apart and media blasted. Once cleaned, the thermistor is carefully removed from the tube and opened up so that the mesh screen and insulator can be chemically cleaned. All wire leads are removed and tested, then resoldered to their contact points. Upon reassembly, initial testing is done with VOM....

Price: $198.77

Buy Details

Availability: In-Stock Item
Item #: 33077 -

This option requires that you pay a $65 core charge.  Be aware that the OEM Ford 1968 sending units had 3/8 inch tubes for the filter, 1967 had 5/16 inch tubes. Our service is to rebuild your standard fuel sending unit. Yes, we can rebuild other than 1967-73 Mercury Cougar and Ford Mustang sending units. 1967-1980 Ford sending units accepted. See our related listing for low fuel sending unit rebuilding. A quality core must be complete and not overly corroded. We are unable to...

Price: $174.29

Buy Details

Availability: In-Stock Item
Item #: 10445 -

Basic kit for rebuilding a 1967-70 Holley model 4150 4 barrel carburetor. Includes illustrated instructions. Holley packaged renew kit. This kit is not for model 4160 or other Holley carburetors. See pictures of Holley 4150 below. Click on images to enlarge. ...

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 31893 -

New hex head screw for attaching the fuel filler neck to the rear body. 67 to 70 Mercury Cougar and 1965-70 Ford Mustang. 1965-68 filler necks require 4 of this style screws. 1969-70 filler necks require a total of 5 hex head screws. #10 x 3/8". Replaces Ford number 42120-S8.

Price: $0.66

Buy Details

Availability: In-Stock Item
Item #: 27565 -

Original style fuel tank installation screw. 3/8 inch hex head. Black phosphate finish on this reproduction, originals were plated. Fits all 1967-70 Mustang and Cougar fuel tanks. See item 11942 for the kit of 12 screws, better value.

Price: $7.85

Buy Details

Availability: In-Stock Item
Item #: 11942 -

Original style fuel tank installation screw kit. 3/8 inch hex head. This is a set of 12 new screws. Black phosphate finish on this reproduction, originals were plated. Fits all 1967-70 Mustang and Cougar fuel tanks.

Price: $2.35

Buy Details

Availability: In-Stock Item
Item #: 26063 -

This is a very specialized screw that you do not want to fail or make do with an incorrect fitting or stripped screw. When removing your old screw you will most likely have to pull your pedal assembly and have a perfect fitting screw driver to remove the screw as the factory put them in very tight!

Price: $54.00

Buy Details

Availability: In-Stock Item
Item #: 18931 -

Accelerator pedal shaft assembly that mounts to the engine firewall. For use with small block 1967-68 Cougars with C-4, automatic transmissions. This same assembly is used on small block Ford Mustangs 1966 - 1968. These assemblies are just the main shaft only, and do not come with the accelerator pedal or the throttle linkage. These made in Taiwan assemblies are pretty decent looking but for less money we have original FoMoCo which with a little TLC will look better and the fit is always...

Price: $61.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23965 -

Accelerator pedal shaft assembly that mounts to the engine firewall. For use with small block Cougars with automatic transmissions. This same assembly is used on small block Ford Mustangs 1966 - 1968.

Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24312 -

Accelerator pedal shaft assembly that mounts to the engine firewall. For use with 390 or 428 Cobra Jet FE big block 1967-68 Mercury Cougar and Ford Mustang with automatic transmission.Ford part number C7ZZ-9725-A.

Price: $50.76

Buy Details

Availability: In-Stock Item
Item #: 19010 -

Accelerator pedal shaft assembly that mounts to the engine firewall. For use with small block 1967-68 Cougars with manual transmissions. This same assembly is used on small block Ford Mustangs 1966 - 1968. These assemblies are just the main shaft only, and do not come with the accelerator pedal or the throttle linkage. These made in Taiwan assemblies are pretty decent looking but for less money we have original FoMoCo which with a little TLC will look better and the fit is always superior.Ford...

Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23893 -

Accelerator pedal shaft assembly that mounts to the engine firewall. For use with any factory Cougar V8 engine. 289, 302, 390, or 428CJ Cougars with manual transmissions.

Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 41016 -

Reproduction Smog Pump Pully Bolt for the 1967 - 1968 Mercury Cougar or Ford MustangSold individually 

Price: $1,695.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 32128 -

Reproduction black Holley "Sniper" fuel injection conversion carburetor for the 67 - 73 Cougar or Mustang. Upgraded Sniper II also now available! Dual Pattern bolt on carburetor replacement, designed to fit 4150 Flange & Spread Bore manifolds - (Spread Bore Sealing Plate Part #9006 is recommended)Throttle body mounted ECU – no extra boxes to mountSupports up to 650hp with Four 100 Lb/Hr InjectorsOnly 4 Wiring Connections Required! (Battery +, Battery - , Switched Ignition & RPM)Includes...

Price: $1,795.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 33548 -

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

Price: $12.95

Buy Details

Availability: In-Stock Item
Item #: 41869 -

Higher quality and higher tension spring than the spring offered by most Mustang/Cougar parts dealers. Replaces Ford part #: C5ZZ-9737-B or C7ZZ-9737-B

Price: $17.65

Buy Details

Availability: In-Stock Item
Item #: 41849 -

Reproduction Concours Accelerator Return Spring for the 1968 Mercury Cougar / Ford Mustang

Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23968 -

"L" shaped bracket that mounts to the rear carburetor mounting hole for attaching the return spring. Bracket faces forward when installed. *NOTE* This bracket is a bit shorter than the 4V version.

Price: $60.35

Buy Details

Availability: In-Stock Item
Item #: 14-0006 -

New strip caulk for the Mercury Cougar or Ford Mustang. These units come in one foot strips and are used for sealing the front fenders to top of aprons and for sealing the fuel tank flange to the trunk floor. They are also used for sealing the floor drain plugs, gas filler necks, door panel water shields, plus many other components that are fastened to the body. This box contains 60 individual strips of black non-hardening caulk.

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24142 -

This is the Left hand or driver side spring that holds the rear license plate or fuel door in the upright position. Fits all years of Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-B

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24141 -

This is the right hand or passenger side spring that holds the rear license plate or fuel door in the upright position. Fits 1967-68 and 1971-73 Cougar and 1966-71 Torino and Fairlane models except Station wagon and RancheroFord Part #: C7WY-13455-A

Price: $43.07

Buy Details

Availability: In-Stock Item
Item #: 13950 -

Kit comes complete with accelerator linkage rod, bushings and clip kit and return spring. Replaces Ford Part #: C5ZZ-9A702.

Price: $15.17

Buy Details

Availability: In-Stock Item
Item #: 13933 -

Great little kit that is a big time saver! Correct in detail, every 40 year old Cougar needs this kit! Replaces Ford Part #: C5ZZ-9A702-MK.

Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 26194 -

Black moulded plastic pedal pad for all 1967 and 1968 Mercury Cougars regardless of engine or transmissions. Used pads with various amounts of wear on the surface. Stainless surround trim available too - Part number C5ZZ-9735-A.

Price: $7.15

Buy Details

Availability: In-Stock Item
Item #: 13951 -

Correct spring, black phosphorus plated. Does not have the same tension as original spring. We also have a Concours spring that has the correct tension. Replaces Ford Part #: C5ZZ-9737-B.*Trivia* Did you know the first Cougar cast for production in 1968 was this "Custom Cougar"? This fine example was offered up on ebay summer 2008 for a mere $6500.

Price: $10.95

Buy Details

Availability: In-Stock Item
Item #: 13952 -

Good reproduction of the 1967 throttle rod for 289 engines. It will fit on 1968 with any 289 or 302 engine with Ford Autolite carburetors. Will also fit most Holley and Edelbrock carburetors too. We also sell used versions of both 1967 and 1968 small block throttle rods. Consider also purchasing a linkage clip, see related items.Reference from mercurycougar.net: Best guys to always talk to about Cougars...will take the time on the phone with you, call you back if you leave a message, got all...

Price: $20.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11069 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang with 289 or 302 engines. Ford part number C8ZZ-9A-702-A. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. *Note - not for use with factory cruise control.

Price: $35.01

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11070 -

Metal rod that hooks to the carburetor linkage and the accelerator pedal bellcrank, or shaft. Rod measures 12.66 inches long. Hooked end goes into the carburetor linkage, threaded end to the rear. Application 1968 Mercury Cougar and Ford Mustang. A rod end clevis clip is needed for attachment to the carburetor - see part B7A-9826-A. Ford part number C8WY-9A702-A *Note - Before 12/11/1968. *Note - not for use with factory cruise control.

Price: $31.85

Buy Details

Availability: In-Stock Item
Item #: 41865 -

Concours Correct Throttle Linkage Rod, 13 1/2" long, S code 390-4V, W code 427-4V, and R code 428CJ with factory 4 barrel HOLLEY carburetor, with out speed control.Replaces Ford Part # C8ZZ-9A702-A

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27465 -

Clip for mounting the throttle linkage rod rod to the carburetor and mounts C-4 or C-6 throttle cables to the throttle bell cranks.Replaces Ford part number C2VY-9826-A.

Price: $21.47

Buy Details

Availability: Out of Stock
Item #: 32996 -

Reproduction vacuum fitting for Holley 4150 carburetors as found on 1967-70 Mercury Cougar and Ford Mustang. All brass fitting, goes into the passenger side of the carburetor for the vacuum advance. This should be ported vacuum.Ford part number 358165-S.

Price: $62.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11212 -

Wiring harness for the low fuel sending units on 1968 Mercury Cougar XR7 and standard models with low fuel warning light. The Safety Convenience Option included a low fuel warning light. This harness has two wires which attach to the three prongs on the 1968 C8ZF-9275-B low fuel sending units.1967 and 1968 will interchange, 1967 has a plastic shielding on the end of the wire loom that is under the car. 1968 version does not have this shielding. Ford part number is C8WB-14406-A or C8WY-14406-A....

Price: $11.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30350 -

Used wiring pigtail that runs from the main 14401 harness to the low fuel light on your 67 - 68 XR7 Cougar.

Price: $210.87

Buy Details

Availability: Out of Stock
Item #: 24473 -

1968 390-2V Autolite 2100 carburetor, automatic C6 transmission - All 50 states. C8WF-A stamped on the carburetor base. Core, rebuildable carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top. PCV spacer plates also available and required for stock air cleaner clearance on top of engine. X code engine 390-2V premium fuel. *Trivia every single X code 390-2V Cougar was an automatic, no manual transmissions what so ever.

Price: $349.07

Buy Details

Availability: Out of Stock
Item #: 31006 -

1968 302-4V Autolite 4300 carburetor, Canada DSO's - Open Emissions. C8ZF-B stamped on the carburetor base, 1.00" venturi size and 470 cfm. Core, rebuildable carburetor with proper numbers. Not sure if this is for stick or automatic transmissions, Notice the unique color on the tag? 

Price: $421.97

Buy Details

Availability: Out of Stock
Item #: 24417 -

1968 390-4V Holley 4150 carburetor, 3 or 4 speed manual transmission - all 50 states. C8OF-9510-C stamped on the carburetor air horn. Holley list #3795, 600 cfm. Core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube or good choke assembly on our cores.

Price: $1,461.47

Buy Details

Availability: Out of Stock
Item #: 24415 -

1968 428CJ-4V Holley 4150 carburetor, 3 or 4 speed manual transmission - all 50 states. C8OF-9510-AA stamped on the carburetor air horn. Holley list #4174, 735 cfm. Core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube or good choke assembly on our cores.

Price: $956.57

Buy Details

Availability: Out of Stock
Item #: 24416 -

1968 428CJ-4V Holley 4150 carburetor, automatic C6 transmission - All 50 states. C8OF-9510-AB stamped on the carburetor air horn. Holley list #4168, 735 cfm. Core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube or good choke assembly on our cores.

Price: $817.97

Buy Details

Availability: Out of Stock
Item #: 24349 -

This Holley 4150 carburetor is for the1968 427-4V engine equipped with the C6 automatic transmission. This carburetor was used on cars for all 50 states with Holley list #4088. This is a 600 cfm core carburetor with proper numbers. We don't always have the factory Ford Autolite tag that was affixed to the top, transfer tube, or good choke assembly on our cores. GT-E C6 automatic only. Current listing is a Ford service replacement carburetor. It has a date of 962 on the horn, and the tag shows...

Price: $129.87

Buy Details

Availability: Out of Stock
Item #: 31424 -

NOS stainless steel, carburetor deflector gasket for W code GT-E 427-4V engines.  Order of installation: Open gasket #15292, SS plate #31256, Phenolic spacer #41936, paper gasket #11813, Holley 4088 carburetor. Ford part number C8AZ-9A589-C,  Engineering number C8AE-9A589-E This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts...

Price: $74.57

Buy Details

Availability: Out of Stock
Item #: 41936 -

CARBURETOR SPACER PLATE, 0.28" thick, has correct tab marked "FRONT". Replaces Ford Part Number C8AZ-9A589-G