Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-288 of 714
$0 Price: $4.62

Buy Details

Availability: In-Stock Item
Item #: 10621 -

New water pump gasket for 1967-69 Mercury Cougar and Ford Mustang with 289/302/351W. Single gasket for sealing water pump to water pump plate only.

$0 Price: $24.27

Buy Details

Availability: Out of Stock
Item #: 10128 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1964-73 small block Ford engines with size 260/289/302 cubic inches. C code 289-2V, A code 289-4V, F code 302-2V, and J code 302-4V.*Note - Excludes 1969-70 Boss 302 engines.

$0 Price: $30.49

Buy Details

Availability: In-Stock Item
Item #: 12096 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1969-73 small block Ford engines with size 351 cubic inches, Windsor engine only. 1969-70 Mercury Cougar and Ford Mustang with 351W engines.Any doubts? 351 windsor engines have 6 bolts holding the valve covers in place. 351 Cleveland engines have 8 bolts holding down the valve covers.*Note - Excludes 289/302 engines. *Note - Excludes 351C or 351 Cleveland engines.

$0 Price: $22.35

Buy Details

Availability: In-Stock Item
Item #: 12960 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1967-70 big block Ford engines with size 390, 427, or 428 cubic inches, FE engine only. 1967-70 Mercury Cougar, Ford and Ford Mustang.

$0 Price: $21.95

Buy Details

Availability: In-Stock Item
Item #: 10626 -

New timing cover gasket set for 1967-70 Mercury Cougar and most all Fords with 289/302/351W engines. Gasket set includes; timing cover gasket, crankshaft seal, water pump gasket for early or late water pumps, and the oil pan corner gaskets under the timing cover.

$0 Price: $20.52

Buy Details

Availability: In-Stock Item
Item #: 10628 -

New timing cover gasket set for the 1967-70 Mercury Cougar and most Fords with 390-2V, 390-4V, 427-4V, and the 428 Cobra Jets. Gasket set includes; crankshaft seal, timing cover gasket, two water pump gaskets, fuel pump gasket, and oil pan to timing cover gasket.

$0 Price: $27.87

Buy Details

Availability: In-Stock Item
Item #: 41604 -

Cork valve cover gaskets for any big block Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $33.85

Buy Details

Availability: In-Stock Item
Item #: 41614 -

Rubber valve cover gaskets for any FE 390 or 428 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

MSRP:$18.00
$18.00 Price: $12.75

Buy Details

Availability: In-Stock Item
Item #: 26499 -

Reproduction plastic battery hold down for the Mercury Cougar or Ford Mustang. According to the Master Parts Catalog, late 1969 through mid 1970, Cougars and Mustangs used these black plastic units. Late 1970 used the same as the 1971-73 model.Replaces Ford part # D0DZ-10718-A.

$18.00 Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 33239 -

Used plastic battery hold down for the Mercury Cougar or Ford Mustang. According to the Master Parts Catalog, late 1969 through mid 1970, Cougars and Mustangs used these black plastic units. Probably introduced at the same time in very late 1969 as when the hold down clip was used to attach to the battery apron? Replaces Ford part # D0DZ-10718-A and casting number D0DB-10755-A. 

$0 Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 15108 -

THIS ITEM CARRIES A $65 REFUNDABLE CORE CHARGEAll 1969 Mercury Cougar 351W engines. Includes both the H code 351-2V and the M code 351-4V engines. The 1969 351 Windsor harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 6-3/8 inches, and 3/4 inches thick. Ford part number C9OZ-6316-A. Has the timing marks on rim. Refundable $65.00 core charge when rebuildable C5AE-6316-A harmonic balancer is received by WCCC. *Note - Not...

$0 Price: $138.55

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 14236 -

Usually ships in 3-5 business days. 1969 3 bolt crankshaft pulley provision. No casting number works well for a non concours engine. 351 Windsor engine only. No casting numbers, has imprinted timing marks and numbers like original.

$0 Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18539 -

Includes both the H code 351-2V and the M code 351-4V engines. The 1969 351 Windsor harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 6-3/8 inches, and 3/4 inches thick. Crank shaft balancer, crankshaft dampener, harmonic balancer. Has the timing marks on rim. The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option...

$0 Price: $121.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11116 -

Includes all X code 390-2V, S code 390-4V, GT-E W code 427, and 428 Cobra Jet engines 1968 - 1970 only. The C8AE-6316-A harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 7 inches, and 1-1/16 inches thick. Has the timing marks on rim.  The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option for those wanting to...

$0 Price: $248.33

Buy Details

Availability: In-Stock Item
Item #: 15112 -

Includes all X code 390-2V, S code 390-4V, GT-E W code 427, and 428 Cobra Jet engines for 1968-70 only. The C8AE-6316-A harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 7 inches, 1-1/16 inches thick and has the timing marks on rim. Refundable $50.00 core charge when a rebuildable C8AE-6316-A harmonic balancer is received by WCCC. Ford part # C8AZ-6316-B, Ford casting # C8AE-6316-A.*NOTE* Excludes 1967 S code 390-4V...

$0 Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 24336 -

Ford casting number C8AE-6316-C Includes all 1969-70 Q or R code 428SCJ engines or those cars with the drag pak option. Outside diameter is approximately 7-1/2 inches. Ford part number C8AZ-6316-C. Has the timing marks on rim. This is a rebuild service only, your core harmonic balancer will be sent to our rebuilder, allow 3-4 weeks turn around. 3 - 4 weeks after we receive your rebuildable C8AE-6316-C core at WCCC. *Note - Excludes 1969 - 1970 428 non dragpack Cobra Jet engines.Click on images...

$0 Price: $499.00

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 18527 -

ETA FOR THIS ITEM IS 8/23/2023Decent off shore part. Since good used cores are very expensive and almost impossible to find this is often the only choice.

$0 Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 24794 -

Ford casting number C9ZE-6316-B or C9ZE-6316-C. Includes all 1969 G code Boss 302 engines. Ford master part number C9ZZ-6316-B. Has the timing marks on rim. This is a rebuild service only, your core harmonic balancer will be sent to our rebuilder, allow 3-4 weeks turn around. 3 - 4 weeks after we receive your rebuildable C9ZE-6316-B or C9ZE-6316-C core at WCCC. *Note - Excludes 1970 Boss 302 and all non-Boss 302 engines. Click on images to enlarge. This is a picture of a 40 year old piece of...

$0 Price: $685.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18550 -

C9ZE-6316-B 1969 G code Boss 302 Eliminator and Mustang only. Ford casting number C9ZE-6316-C is also acceptable. Outside diameter is approximately 6-1/2 inches. Ford master part number C9ZZ-6316-B. Crankshaft balancer, crank-shaft dampener, harmonic balancer. If you have a rebuildable core 1969 Boss 302 balancer to trade, we can offer a substantial discount off of the retail price.  Notice the rubber on this one is unusually nice. *Note - Excludes 1970 Boss 302 and all non-Boss...

$0 Price: $63.04

Buy Details

Availability: In-Stock Item
Item #: 15781 -

This 8 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 4 Barrel Carburetor, where the choke tube enters through the side of the choke housing.

$0 Price: $69.22

Buy Details

Availability: In-Stock Item
Item #: 20547 -

This 8 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 4 Barrel Carburetor, where the choke tube enters through the side of the choke housing.

$0 Price: $89.87

Buy Details

Availability: In-Stock Item
Item #: 15780 -

This 7 piece kit is for 1969 or 1970 Mercury Cougar and Ford Mustang with the 351 Windsor and a 2 Barrel Carburetor, where the choke tube enters through the bottom of the choke housing.

$0 Price: $56.95

Buy Details

Availability: In-Stock Item
Item #: 41489 -

These steel tubes are made to exacting O.E.M. standards and specifications. All choke tubes have the proper fiberglass insulation, fittings, rubber hose, and S-clip. Also includes cold air tube when applicable.

$0 Price: $333.33

Buy Details

Availability: In-Stock Item
Item #: 14098 -

*NOTE: This item comes un-painted from the manufacturer.Very correct reproduction of an impossible to find part. The only difference I can detect is that this original weighs just an ounce or two more than the original. Click on images to enlarge. Customer feedback found at mercurycougar.net: Boy service is just not the same as the "good old"? days. I ordered a half a trunk load of parts and pieces from West Coast Classic Cougar and about 2 hours later got a phone call informing me that the...

$0 Price: $185.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33490 -

Factory installed, used engine mount heat shield, for any 1969-70 Boss 302 Mercury Cougar Eliminator or Ford Mustang. Mounts to the driver side mount and the asbestos portion lays under the exhaust manifold. Basic Ford part number is 6C038 for motor mount heat shields.  *Note - this item will likely not work with headers.*Note - this part does contain asbestos.

$0 Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18542 -

Since we have a difficult time keeping grade "A" Windsor heat shields in stock we also offer a driver quality version. This unit will be very thin from rust in certain areas. C9OZ-9A603-A Metal shroud and tube assembly that attaches to the factory 1968-1969 air cleaner assembly on all 351 Windsor engines both H code 351-2V and M code 351W-4V (1969 offering only). *Note - for 1970 this shield is used after build date of 2-2-1970, but could be used on prior dates. We suspect that the early 2...

$0 Price: $576.92

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 14051 -

*NOTE: This item comes un-painted from the manufacturer.Another spot on reproduction! Correct for CJ and SCJ.  Comes with brackets and hardware as shown. Click on images to enlarge. ...

$0 Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 10735 -

Nut for attaching the power steering pump bracket onto the pivot stud coming out of the cylinder head. All 1967-69 Mercury Cougar and Ford Mustang engines additionally used on 1970 428CJ engines.

$0 Price: $59.85

Buy Details

Availability: Out of Stock
Item #: 23563 -

This item has been discontinued until further notice.Basically correct looking except for screws in place of the rivets. The High or Low tone is indicated in raised letters located on the perimeter of the horn. Replaces Ford Part #: C9ZZ-13832 / C9ZZ-13833 or C9ZF-13801-B / C9ZF-13802-C.

$35.00 Price: $38.57

Buy Details

Availability: Out of Stock
Item #: 13850 -

This item has been discontinued until further notice.The High tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13832 or C9ZF-13801-B.

MSRP:$35.00
$35.00 Price: $28.67

Buy Details

Availability: Out of Stock
Item #: 13851 -

This item has been discontinued until further notice.The Low tone is indicated in raised letters located on the perimeter of the horn. We do offer the correct used Cougar horns.Replaces Ford Part # C9ZZ-13833 or C9ZF-13802-C.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10867 -

Attaches behind the drivers side horn on all 1969-70 Mercury Cougar and Ford Mustangs with air conditioning. We believe that this part was installed to maintain clearance with the A/C condenser. Ford part number C9ZF-13925-A as seen in the 1969 Electrical Assembly Manual.