Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-288 of 698
Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 10623 -

New water pump gasket for FE Ford engines. 1967-70 Mercury Cougar and Ford Mustang with 390/427/428CJ engines. Single gasket, two gaskets needed for installing your water pump. Price is for one gasket only.

Price: $4.62

Buy Details

Availability: In-Stock Item
Item #: 10621 -

New water pump gasket for 1967-69 Mercury Cougar and Ford Mustang with 289/302/351W. Single gasket for sealing water pump to water pump plate only.

Price: $196.17

Buy Details

Availability: In-Stock Item
Item #: 10018 -

If you're going to rebuild your engine, this is the item you'll want to get. It's the complete gasket set for your 289 and 302 engines. (Will not fit early Boss engines). Included in this kit are the following: Head Gaskets Intake GasketsOil Pan Gasket Rear Main SealExhaust Manifold Gaskets Valve Cover Gaskets Water Pump GasketsTiming Cover Gaskets Timing Cover SealWater Neck GasketFuel Pump GasketDistributor Gasket ...

Price: $22.35

Buy Details

Availability: In-Stock Item
Item #: 12960 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1967-70 big block Ford engines with size 390, 427, or 428 cubic inches, FE engine only. 1967-70 Mercury Cougar, Ford and Ford Mustang.

Price: $21.95

Buy Details

Availability: In-Stock Item
Item #: 10626 -

New timing cover gasket set for 1967-70 Mercury Cougar and most all Fords with 289/302/351W engines. Gasket set includes; timing cover gasket, crankshaft seal, water pump gasket for early or late water pumps, and the oil pan corner gaskets under the timing cover.

Price: $20.52

Buy Details

Availability: In-Stock Item
Item #: 10628 -

New timing cover gasket set for the 1967-70 Mercury Cougar and most Fords with 390-2V, 390-4V, 427-4V, and the 428 Cobra Jets. Gasket set includes; crankshaft seal, timing cover gasket, two water pump gaskets, fuel pump gasket, and oil pan to timing cover gasket.

Price: $27.87

Buy Details

Availability: In-Stock Item
Item #: 41604 -

Cork valve cover gaskets for any big block Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Price: $33.85

Buy Details

Availability: In-Stock Item
Item #: 41614 -

Rubber valve cover gaskets for any FE 390 or 428 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Price: $258.33

Buy Details

Availability: Discontinued
Item #: 31678 -

Rebuilt early 289 harmonic balancer. or crank shaft dampener. C3AE-6316-G Cast iron construction with key way groove. Has the timing marks and date on rim. This one is dated L3, or November 1963. Application is late 1963 and early 1964 Ford or Mercury 289-2V or 289-4V engines. No core required, this was an oops on our part. 100% rebuilt by local reputable rebuilder. *Note - Not for the K code 271Hp 289 HiPo engines. Click on images to enlarge. This is a picture of a 40 year old piece...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 23837 -

C5AE-6316-A All 1967 and 1968 Mercury Cougar includes both C code 289-2V and A code 289-4V engines. 1967 and 1968 only, 6-5/16 inches in diameter, 3/4 inches thick, cast iron construction with key way groove. Has the timing marks on rim. Refundable $50.00 core charge when rebuildable C5AE-6316-A harmonic balancer is received by WCCC. *Note - Not for the K code 271Hp 289 HiPo engines.We don't offer that one because Ford never installed that engine in any Cougar. We can offer the rebuilding...

Price: $136.45

Buy Details

Availability: In-Stock Item
Item #: 14240 -

Unlike our rebuilt units that feature a lifetime warranty, these new units only carry a one year warranty and when you factor in the machining costs and steel cost you know that they cannot afford to sell them at this price and use the $200 dollar a gallon rubber used in our rebuilt units. In all fairness, Ford never used the extreme duty rubber back in the day either. That being said these are a decent unit at a reasonable cost, especially for those of you that have not core to exchange on...

Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18651 -

All 1967 and 1968 Mercury Cougar includes both C code 289-2V and A code 289-4V engines. 1967 and 1968 only, 6-5/16 inches in diameter, 3/4 inches thick, cast iron construction with key way groove. Has the timing marks on rim. The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option for those wanting to keep a 100% original looking appearance on a concours car that does not get driven or see...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 22541 -

C8OE-6316-A1 All 1968 Mercury Cougar 302 engines. Includes both the F code 302-2V and the J code 302-4V engines. The 1968 302 harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 6-1/2 inches, and 1-7/8 inches thick. Weighs 8.8 lbs. Ford casting number C8OE-6316-A1 is also an acceptable casting number. Ford part number C8AZ-6316-A. Has the timing marks on rim. Core charge is refundable when rebuildable C8OE-6316-A1 harmonic...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 15111 -

C8OE-6316-A2 All 1968 Mercury Cougar 302 engines. Includes both the F code 302-2V and the J code 302-4V engines. The 1968 302 harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 6-1/2 inches, and 1-7/8 inches thick. Weighs 8.8 lbs. Ford casting number C8OE-6316-A2 is also an acceptable casting number. Ford part number C8AZ-6316-A. Has the timing marks on rim. Core charge is refundable when rebuildable C8OE-6316-A2 harmonic...

Price: $163.65

Buy Details

Availability: In-Stock Item
Item #: 14243 -

Unlike our rebuilt units that feature a lifetime warranty, these new units only carry a one year warranty and when you factor in the machining costs and steel cost you know that they cannot afford to sell them at this price and use the $200 dollar a gallon rubber used in our rebuilt units. In all fairness, Ford never used the extreme duty rubber back in the day either. That being said these are a decent unit at a reasonable cost, especially for those of you that have not core to exchange on...

Price: $95.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18529 -

Ford casting number C8OE-6316-A All 1968 Mercury Cougar 302 engines. Includes both the F code 302-2V and the J code 302-4V engines. The 1968 302 harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 6-1/2 inches, and 1-7/8 inches thick. Ford casting number C8OE-6316-A2 is also an acceptable casting number. Ford part number C8AZ-6316-A. Has the timing marks on rim.  The rubber in this used balancer will be the original...

Price: $121.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11116 -

Includes all X code 390-2V, S code 390-4V, GT-E W code 427, and 428 Cobra Jet engines 1968 - 1970 only. The C8AE-6316-A harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 7 inches, and 1-1/16 inches thick. Has the timing marks on rim.  The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option for those wanting to...

Price: $341.87

Buy Details

Availability: In-Stock Item
Item #: 15112 -

Includes all X code 390-2V, S code 390-4V, GT-E W code 427, and 428 Cobra Jet engines for 1968-70 only. The C8AE-6316-A harmonic balancer is identified by the 3 bolt holes for attaching the crankshaft pulley. Outside diameter is approximately 7 inches, 1-1/16 inches thick and has the timing marks on rim. Refundable $50.00 core charge when a rebuildable C8AE-6316-A harmonic balancer is received by WCCC. Ford part # C8AZ-6316-B, Ford casting # C8AE-6316-A.*NOTE* Excludes 1967 S code 390-4V...

Price: $49.44

Buy Details

Availability: In-Stock Item
Item #: 15260 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

Price: $23.65

Buy Details

Availability: In-Stock Item
Item #: 15261 -

Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

Price: $29.15

Buy Details

Availability: In-Stock Item
Item #: 15286 -

Exact OEM standards and specificatons. Correct fiberglass insulation, fittings, rubber hose and S clip.

Price: $56.95

Buy Details

Availability: In-Stock Item
Item #: 41489 -

These steel tubes are made to exacting O.E.M. standards and specifications. All choke tubes have the proper fiberglass insulation, fittings, rubber hose, and S-clip. Also includes cold air tube when applicable.

Price: $385.07

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20363 -

Very rare one year only heat riser "S" shaped metal tube that attaches to the heat shield on the passenger side front portion of the exhaust manifold. Correct for all 1968 Cougars equipped with the 390 cubic inch engine.Ford part number C8AZ-9652-A.

Price: $333.33

Buy Details

Availability: In-Stock Item
Item #: 14098 -

*NOTE: This item comes un-painted from the manufacturer.Very correct reproduction of an impossible to find part. The only difference I can detect is that this original weighs just an ounce or two more than the original. Click on images to enlarge. Customer feedback found at mercurycougar.net: Boy service is just not the same as the "good old"? days. I ordered a half a trunk load of parts and pieces from West Coast Classic Cougar and about 2 hours later got a phone call informing me that the...

Price: $94.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27459 -

C8AZ-9A603-C metal shroud and tube assembly that attaches to the factory 1968 air cleaner assembly on all C code 289-2V engines as well as F code 302-2V, and J code 302-4V engines all for 1968. We do not believe that this set up came with the Canadian export Cougars, those 1968 Cougars should have the closed PCV system, much like the 1967 49 state Cougars.Do to age and their location our used risers will have minor surface rust, but otherwise be in good condition. Reproduction version of this...

Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24377 -

C8AZ-9A603-C metal shroud and tube assembly that attaches to the factory 1968 air cleaner assembly on all C code 289-2V engines as well as F code 302-2V, and J code 302-4V engines all for 1968. We do not believe that this set up came with the Canadian export Cougars, those 1968 Cougars should have the closed PCV system, much like the 1967 49 state Cougars.Do to age and their location our used risers will have rust and or be very thin in spots. Reproduction version of this part is no longer...

Price: $366.17

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19258 -

Very hard to find, one year only part that is not currently reproduced. These came on 1968 Cougars equipped with the "S" code 390 and the "X" code 390. Must have for that show quality GT or XR7-G. *NOTE* Please keep in mind that our hard to find parts like this are not always competitively priced with what you will find on the open market at swap meets and private party sales. Our primary intent in listing these is for our customers to use this website as a resource to properly identify parts...

Price: $538.46

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 14051 -

*NOTE: This item comes un-painted from the manufacturer.Another spot on reproduction! Correct for CJ and SCJ.  Comes with brackets and hardware as shown. Click on images to enlarge. ...

Price: $4.95

Buy Details

Availability: In-Stock Item
Item #: 41259 -

Sold individually Zinc (Dark Silver)

Price: $1.25

Buy Details

Availability: In-Stock Item
Item #: 10735 -

Nut for attaching the power steering pump bracket onto the pivot stud coming out of the cylinder head. All 1967-69 Mercury Cougar and Ford Mustang engines additionally used on 1970 428CJ engines.

Price: $86.27

Buy Details

Availability: In-Stock Item
Item #: 32703 -

NOTE: A FEW CUSTOMERS HAVE MENTIONED THAT THE INSTRUCTIONS MAY BE WRONG. SWITCHING PINS 1 AND 5 HAD A BETTER RESULT. IF YOU RECEIVE THIS PART AND ARE HAVING TROUBLE WITH THE INCLUDED INSTRUCTIONS, TRY SWITCHING TO SEE IF YOU GET THE SAME RESULTS. Make those horns sound like they should! These relay kits work just like my headlight relay kits to deliver full system voltage to your horns. Ford used horn relays on many vehicles into the early seventies. Unfortunately Mustangs after '65 and...

Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 31588 -

Reproduction hose that connects the oil cap to the air cleaner on cars equipped with the 289 engine. Replaces Ford Part number C6AZ-6A664-P