Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-144 of 602
Price: $9.75

Buy Details

Availability: In-Stock Item
Item #: 26487 -

Stamped steel construction with black vinyl coating like the original to prevent corrosion. Please note that vinyl coating will almost always crack along edges shortly after installation, just like the originals did... This is the same exact hold down you will see listed elsewhere its just that we feel you should know what you are getting up front so you will not be surprised. Replaces Ford part #: C5AZ-10718-A.

Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 13911 -

Designed for any one-inch hose, this clamp can be used for a number of different applications including the breather hose between the valve cover and air cleaner on 1967, and 1968 Cougars.

Price: $9.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30135 -

Used distributor clamp with bolt, for any 260 / 289 / 302 / 351W / 351C / 429CJ built from 1963-1973. May come with either an original used bolt or the new bolt made by AMK Products. Ford part number C3AZ-12270-A.

Price: $16.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30136 -

Used distributor clamp and bolt, for any FE Engine: i.e. 352 / 360 / 390 / 410 / 427-4V / 428 / 428CJ / 428SCJ built from 1958-1976. Bolt may be used, or new from AMK Products. Ford part number B8A-12270-A.

Price: $71.85

Buy Details

Availability: In-Stock Item
Item #: 10304 -

Reproduction thermal fan clutch that fits 1967 - 68 289 engines, 1968 302/390/427/428CJ engines, and 1969 351W engines, all with original Ford thermal cooling fans. Slightly larger in overall diameter, (still fits fine), and retains the correct spacing from radiator. We know that these will fit Mercury Cougar and Ford Mustangs 1967-69. Closest reproduction fan clutch on the market that fits the original and reproduction C8OE-B 7 blade power fan. Hayden fan clutch with an overall height of 2.98...

Price: $215.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24227 -

C7ZE-8A616-B For all 1967 - 289 engines with air conditioning (fan marked C6OE-G), and all 390 engines (fan marked C6OE-F), without air conditioning. Fan clutch marked C7ZE-B on the hub. Ford part number C7OZ-8A616-C. Ford Motorcraft number YB-107. Good used clutch, we are unable to warranty these units.

Price: $399.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24226 -

C7ZE-8A616-A Application is 1967 S code 390 with air conditioning. Marked C7ZE-A on the hub. Ford part number C7OZ-8A616-A. Ford Motorcraft number YB-106. Good working clutch, we are unable to warranty these units.

Price: $30.96

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31487 -

Used 1969 351W coil mounting bracket. This version of the bracket is specific on the 351W and allows extra room for the oil dipstick. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. Listed in the...

Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 11302 -

Reproduction coil mounting bracket. The manufacturer claims it fits all cars 1967-73. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. To our knowledge this is the only reproduction style on the...

Price: $30.96

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32631 -

Used coil mounting bracket. This version of the bracket is probably the most common. We happen to know that there are no less than 4 different versions of factory Ford coil brackets used on 1967-73 Mercury Cougar and Ford Mustangs and literally all other Ford cars and trucks. Some have the coil on top of the intake manifold, while some years and engines have the coil mounted to the front of one of the cylinder heads. This version has the notch as shown. We know that this version was used on...

Price: $79.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30252 -

Hot idle compensator valve assembly for many Ford engines with PCV, starting in 1964 through early 1968. Typically found on 1964-66 Ford 260-2V, and 289-2 engines with air conditioning. 1967-68 289-2V, 302-2V and some 390 engines all with air conditioning and PCV or closed emissions. The Ford assembly manual indicates that the Hot Idle Compensator Valve 'T' Assembly, was installed by removing 3/4 inches of the PCV hose, 2-1/4 inches (on center of the PCV valve). See picture for clarification....

Price: $114.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31880 -

This complete four part kit is correct for any 1967-68 small block 289 or 302, and 351 Windsor Mercury Cougar or Ford anything 1967, 1968 and 1969. Used aluminum pump mounting bracket, front adjusting bracket with large hole, pivot stud, and nut.If you do not have a air conditioning you will need a spacer in place of the round spacer shown. If you have the 351 Windsor without A/C, you will need a the rectangular spacer which is sold separately.

Price: $124.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31881 -

This complete four part kit is correct for any 1969 small block 351 Windsor Mercury Cougar or Ford anything 1969. Used aluminum pump mounting bracket, front adjusting bracket with large hole, pivot stud, and nut. If you do not have a air conditioning you will need a the rectangular spacer which is sold separately.

Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23904 -

C6AE-E Multiple applications over the years. 1. Later 1967 production cooling fan, generally used after 11/14/1966 on most 289 engine applications. 2. 1968 302 without air conditioning. 3. Mid year (after 11/6/1968) 1969 351 without air conditioning. 4. 1969 Early Boss 302 before 4/14/1969. 5. 1971 Cougar with 351 engine, without air conditioning. 6. **1973 Cougar 351-2V without air conditioning prior to 2/19/1973. Fan description - 4 blades and 17-1/2 inches in diameter. Ford master part...

Price: $127.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23840 -

C5AE-B This is the early 1967 production cooling fan, used up until 11/14/1966 on 289 engine applications. This does not include those cars with factory, or "integral" air conditioning. Fan description - 5 blades and 17 inches in diameter. Ford master part number C5AZ-8600-A. *Note - Excludes integral air conditioning. Check out this interesting video where they test the efficiency of factory style and aftermarket fans. Spoiler alert: the clutch fans are the most efficient! ...

Price: $245.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23941 -

C6OE-G Clutch style 7 blade cooling fan for all 1967 Cougars with 289 engines with factory installed air conditioning. Additionally, 1968 302 engines with factory air conditioning (Cougar and Shelby GT-350 only). Fan description - 7 blades and 17-1/2 inches in diameter. Fan does not include thermal fan clutch. Ford master part number C4OZ-8600-D. Original fan drive clutch cast number for this application is C7ZE-B. NOTE! If you have the fan shown here and would like to upgrade to our FE / Big...

Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31181 -

Crankshaft oil slinger for all small block Ford V-8's, starting 1963 until at least through 1973. 1963-68 289 and 289 HiPo engines. 1968-73 302 engines, 1969-70 Boss 302 engines, 1969-73 351W engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Outside diameter about 2-7/8 inches. Ford part number C3OZ-6310-A.

Price: $44.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31184 -

Crankshaft oil slinger for all FE Ford V-8's, starting 1958 until at least through 1976. 1967-69 390 engines, 1968 427-4V engines, 1968-70 428, 428CJ, 428SCJ engines, 1958-66 352, and 1968-76 360 engines. Goes on the crankshaft after the timing gear and before the timing chain cover. It does have a purpose on the vintage engines. Outside diameter 3-5/16 inches. Ford part number B8A-6310-A.

Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12323 -

Single cylinder head from 1967 Mercury Cougar with non smog 289 engines, 289-2V and 289-4V all the same. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 1.78 and 1.45 inch valves, and the chambers measure out at 54-55 cc's. With stock pistons, these heads will net an approximate compression ration of 9.3:1. Basic cylinder head number is 6090. Several Ford casting numbers were used, including the common C6OE-M or C6OE-6090-M.These weigh...

Price: $79.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12914 -

Single cylinder head from 1967 Mercury Cougar with California smog 289 engines, 289-2V and 289-4V all the same. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 1.78 and 1.45 inch valves, and the chambers measure out at 54-55 cc's. With stock pistons, these heads will net an approximate compression ration of 9.3:1. Basic cylinder head number is 6090. Several Ford casting numbers were used, including the common C6OE-M. *Note - These...

Price: $185.00

Buy Details

Availability: Out of Stock
Item #: 33014 -

Single cylinder head from 1966 Ford with 390-4V engine. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 2.02 and 1.55 inch valves, and the chambers measure out at 71-74cc's. With stock pistons, these heads will net an approximate compression ration of 10.5:1. Basic cylinder head number is 6090. This is a GT cylinder head with 14 drilled and tapped holes for exhaust manifolds. These weigh 48 lbs. each, and cannot be combined with other items...

Price: $185.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33013 -

Single cylinder head from 1966 Ford with 390-4V engine. Sold as a core, needs thorough cleaning and rebuilding prior to use. These cylinder heads are factory drilled and tapped for thermactos smog tubes. Typically this cylinder head has 2.02 and 1.55 inch valves, and the chambers measure out at 71-74cc's. With stock pistons, these heads will net an approximate compression ration of 10.5:1. Basic cylinder head number is 6090. This is a GT cylinder head with 14 drilled and tapped exhaust...

Price: $255.02

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16158 -

Single cylinder head from 1967 Mercury Cougar with 390-4V engine with California thermactor smog ports. Sold as a core, needs thorough cleaning and rebuilding prior to use. Typically this cylinder head has 2.02 and 1.55 inch valves, and the chambers measure out at 71-74cc's. With stock pistons, these heads will net an approximate compression ration of 10.5:1. Basic cylinder head number is 6090. This is a GT cylinder head with 14 drilled and tapped exhaust bolt holes. Current...

Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26354 -

This is a reproduction of the original orange engine displacement decal with black lettering and black and white checkerboard on each end that was located on the top of the air cleaner.Fits the following models with a 289 High Performance engine:1967 Mercury Cougar1967 Ford MustangThe 289 Hi-Pro motor was never offered in the Cougar as an option but you could order an over the counter unit. ...

Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26347 -

This is a reproduction of the original orange engine displacement decal with black lettering that was located on the top of the air cleaner.Fits the following models with a 289 2 barrel engine:1967 Mercury Cougar1967 Ford Mustang

Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 26254 -

This is a reproduction of the original decal that contains the word "FRONT" that was located on the front of the air cleaner.Fits the following models 1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1971 Mercury Cougar1972 Mercury Cougar1973 Mercury Cougar 1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang1971 Ford Mustang1972 Ford Mustang1973 Ford Mustang ...

Price: $7.97

Buy Details

Availability: In-Stock Item
Item #: 26421 -

This is a reproduction of the original service instruction decal that was located on the side of the air cleaner.Fits the following models:1967 Mercury Cougar1968 Mercury Cougar1969 Mercury Cougar1970 Mercury Cougar1967 Ford Mustang1968 Ford Mustang1969 Ford Mustang1970 Ford Mustang ...

Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 26442 -

Controversy abounds on which shrouds received these and which did not. It is our understanding that no early Cougars came from the factory with this decal installed. This decal first surfaced when Ford had major problems with their flex fans in the early 1970's. We will let you decide if it is correct for your application... This is placed on the top, center of the fan shroud.

Price: $6.45

Buy Details

Availability: In-Stock Item
Item #: 13913 -

Reproduction rubber seal for the top of the brake fluid reservoir on the drum brake equipped Mercury Cougar or Ford Mustang. Also fits 1967-71 Ford or Mercury full and mid sized cars, and 1970-73 Maverick and Comet.  Replaces Ford part # C9AZ-2167-B.

Price: $25.85

Buy Details

Availability: In-Stock Item
Item #: 14253 -

Reproduction disc brake master cylinder cap for the Mercury Cougar or Ford Mustang. This unit has the correct stampings, rubber inner gasket, and is considered show quality. This cap will only fit master cylinder part # 15298.Replaces Ford part # C7AZ-2162.Fits: 1967 Mercury Cougar1968 Mercury Cougar 1969 Mercury Cougar 1970 Mercury Cougar 1971 Mercury Cougar 1972 Mercury Cougar 1973 Mercury Cougar 1967 Ford Mustang / Torino1968 Ford Mustang / Torino 1969 Ford Mustang / Torino 1970 Ford...

Price: $58.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24051 -

Used Distributor / 289-2V / Automatic Transmission for the 1967 Mercury Cougar / 1967 Ford MustangFord part number C7OF-12127-B  

Price: $101.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24057 -

Used Distributor / 289-2V / for the 1967 Mercury Cougar / 1967 Ford MustangFord part number  C7OF-12127-J  

Price: $115.88

Buy Details

Availability: Out of Stock
Item #: 24050 -

Used Distributor / 289-2V / Manual Transmission for the 1967 Mercury Cougar / 1967 Ford MustangFord part number C7OF-12127-A  

Price: $101.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24052 -

Used Distributor / 289-2V / Manual Transmission for the 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford MustangCurrent distributor is dated 7B23, Feb 23, 1967. Ford part number C7OF-12127-D  

Price: $145.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24234 -

Used Autolite distributor with the Ford part number of C7ZF-12127-F. This distributor was specifically used on 289-4V engines with manual transmissions. These used distributors should be considered rebuildable cores. Most will be complete, less the vacuum advance units. This is a tough one to keep in stock, the current one in stock as of March 2019 is dated 8D9 or April 8, 1968. Apparently, this distributor was used for Canadian cars with open emissions in 1968. So add 289-2V, 302-2V, and...

Price: $134.06

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32941 -

Used Distributor / 289-4V / Manual Transmission for the 1967 Mercury Cougar / 1967 Ford Mustang Ford part number C7ZF-12127-E Current distributor is dated 6L18, November 18, 1966.  

Price: $134.06

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24233 -

Used Distributor / 289-4V / Manual Transmission for the 1967 Mercury Cougar / 1967 Ford Mustang Ford part number C7ZF-12127-E Current distributor is dated 6M15, December 15, 1966.  

Price: $154.55

Buy Details

Availability: In-Stock Item
Item #: 32281 -

Reproduction dual port vacuum advance for most all 1968-70 Ford V-8 engines. Very close replica of the factory installed vacuum advance. This version has two pressed in brass fittings for vacuum hoses. This working vacuum advance will need to have your threaded plug installed in the port end. OEM Ford units had gold colored bands instead of this silver band as shown. This unit very closely matches the 1970 vacuum advance, the earlier vacuum advances had one of the vacuum fittings that screwed...

Price: $149.45

Buy Details

Availability: Out of Stock
Item #: 53264 -

Ignitor 1 by Pertronix, effectively replaces your points and condenser from your Distributor. Works in all Ford Autolite distributors found in 1967-73 Mercury Cougar and V8 Mustangs with single point distributors. This is also called an electronic ignition conversion. There is also an upgraded Ignitor II available. -50F To 300F Working Temperature Range, 0-15,000 Rpm Range, This Easy To Install And Maintenance Free Electronic Ignition System Features Solid-State Electronics And Rotating Cobalt...

Price: $196.15

Buy Details

Availability: Out of Stock
Item #: 53265 -

Ignitor II by Pertronix, effectively replaces your points and condenser from your Distributor. Works in all Ford Autolite distributors found in 1967-73 Mercury Cougar and V8 Mustangs with single point distributors. This is also called an electronic ignition conversion. Adaptive Dwell Control -  Dwell increases with RPM to provide an average of 4 times the available energy between 3000 and 5000 RPM and twice the available voltage at the plug. -50F To 300F Working Temperature Range,...

Price: $195.00

Buy Details

Availability: Rare / NOS Part
Item #: 33267 -

New Old Stock vacuum advance. This style used 1972 on Motorcraft 351-4V V-8 distributors. DD-339 and code 348 numbers associated with this unit. This is an MOTORCRAFT marked vacuum advance. Brass nipple not included, but is needed. Instructions for installation with this one too. Application is for Q code 351CJ distributors marked D2ZF-12127-GA, D2ZF-12127-GB, D2ZF-12127-GC, D2ZF-12127-HA, and D2ZF-12127-HB. Ford Part Number D2ZZ-12370-A ...

Price: $195.00

Buy Details

Availability: Rare / NOS Part
Item #: 33268 -

New Old Stock vacuum advance. This style used 1968-69 on Autolite V-8 distributors. A12 and DD-236 numbers associated with this unit. This is an Autolite marked vacuum advance Threaded cap and spring not included Ford Part Number C8AZ-12370-A

Price: $125.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33265 -

New Old Stock vacuum advance. This style used 1965-67 on Autolite V-8 distributors. Designed for use with a threaded nipple. DD-190 and code 303 numbers associated with this unit. This is an Autolite marked vacuum advance, there are other service replacement units marked MOTORCRAFT. Threaded nipple available separately. Ford Part Number C5AZ-12370-A

Price: $95.00

Buy Details

Availability: Out of Stock
Item #: 33266 -

New Old Stock vacuum advance. This style used 1965-67 on Autolite V-8 distributors. Designed for use with a threaded nipple. DD-190 and code 303 numbers associated with this unit. This is an MOTORCRAFT marked vacuum advance, there are other service replacement units marked Autolite. Threaded nipple available separately. Ford Part Number C5AZ-12370-A