Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 193-240 of 616
Price: $172.50

Buy Details

Availability: In-Stock Item
Item #: 19140 -

Good quality "concours" shroud that is more durable than the "horse hair" textured originals. Fits the 1967 390 & 428 Mustang, Cougar & Shelby with the factory 23" radiator or our aftermarket 24" radiator. Opening measures about 19-11/16" in diameter. Since this shroud interchanges with the 1967 Shelby GT500 428 PI, good used shrouds are very expensive and hard to find.  If you happen to have an original you would like to sell we would be very interested in hearing from...

Price: $9.25

Buy Details

Availability: In-Stock Item
Item #: 53254 -

Reproduction concours correct fasteners and clips for attaching the fan shroud to the radiator on 1967 Mercury Cougar and Ford Mustang with original style radiators and fan shrouds. 

Price: $39.85

Buy Details

Availability: Rare / NOS Part
Item #: 32780 -

Fan spacer, measuring 1-1/2 inches. Application includes 1970 Mercury Cougar and Ford Mustang with 351 engines and standard cooling. Reference number YA-21, cross reference to C8OE-8546-A spacer. This is a service replacement design spacer, which came out about 1970. Fits all the same.Ford Motorcraft part # D0AE-8546-B, Ford engineering # D0AZ-8546-B.

Price: $31.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24395 -

Fan spacer, measuring 1-1/2 inches. Application includes 1969 Mercury Cougar and Ford Mustang with 351-2V engines and standard cooling. Reference number YA-21, cross reference to D0AE-8546-B spacer.Ford part # C8OE-8546-A, Ford engineering # C5DZ-8546-B.

Price: $76.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24502 -

Fan spacer measuring 1-1/4 inches. Application includes 1969 Mercury Cougar and Ford Mustang with Boss 302 or 428 Super Cobra Jet engines. Additionally it was likely used on 1971 cars with 351-2V engines and standard cooling. Reference number YA-20, cross reference to D1OA-8546-AA spacer.Ford part # C8YE-8546-A, Ford engineering number C8YZ-8546-A.

Price: $58.37

Buy Details

Availability: Out of Stock
Item #: 24993 -

Fan spacer, measuring 2-1/4 inches or sometimes mentioned as 2-8/32". Application includes 1970 Mercury Cougar and Ford Mustang with Boss 302 engines, or 351 engines with extra cooling or air conditioning. Reference number YA-31.Ford part # D0AE-8546-A, Ford engineering # D0AZ-8546-A.

Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24338 -

Fan spacer, measuring 2-7/16 inches, sometimes mentioned as 2.44". Application includes 1971 Mercury Cougar and Ford Mustang with 351 engines and air conditioning. Reference number YA-74.Ford part # C8AE-8546-E, Ford engineering # C4AZ-8546-F.

Price: $21.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23859 -

Fan spacer, measuring 2-7/8 inches, sometimes mentioned as 3.15" overall. Applications include 1967-68 Mercury Cougar and Ford Mustang with 289/302 and standard cooling. Reference number YA-79.Ford part # C5OE-8546-A, Ford engineering # C5OZ-8546-A.

Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 23839 -

Fan spacer, measuring 3-1/16 inches, sometimes mentioned as 3.40" overall. Applications include 1967 Mercury Cougar and Ford Mustang with 289-4V. Reference number YA-78.Ford part # C5AE-8546-B, Ford engineering # C5AZ-8546-B.

Price: $26.87

Buy Details

Availability: In-Stock Item
Item #: 10895 -

Reproduction radiator fan spacer for fixed or flex fans. Can be used on 1967-73 Mercury Cougar and 1964-73 Fords and Ford Mustangs. Ideally the various length spacers were used to place the fans half way into the fan shrouds for optimal cooling. Original Ford part number C4AZ-8546-A.

Price: $46.95

Buy Details

Availability: In-Stock Item
Item #: 41468 -

Correct black phosphate bolts for use with 289 HiPo (K-code) exhaust manifolds. Although Cougars never offered a HiPo 289, the HiPo manifolds will fit any 67-68 289 or 302.

Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 41281 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

Price: $44.37

Buy Details

Availability: In-Stock Item
Item #: 41282 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds. 390 and 427-4V engines without exhaust heat risers. That kit would include a studded bolt for the heat shield. See item 41282.

Price: $16.97

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32095 -

Oil filter adapter for all Ford small block engines including 221, 260, 289, 289HiPo, 302, and 351W engines. Ford indicates that this was used 1962-1970. Screws into the engine block. We do not know the threads, but the small side is standard oil filter sized.Ford part number C2OZ-6882-C.

Price: $13.86

Buy Details

Availability: Out of Stock
Item #: 15806 -

All steel fitting for the lower radiator tank, found on all cars with automatic transmissions. The fine threads go to the radiator and the transmission cooling line screws onto the flared fitting after installation into the radiator. Two needed per car, sold individually. Fits all years 1967-73, and all automatic transmissions. 1/2" threads go to cooling lines. 3/8" threads go into the radiator. *Note - This is an original steel fitting, not a brass reproduction. ...

Price: $47.25

Buy Details

Availability: In-Stock Item
Item #: 31998 -

Brass and steel freeze plug or expansion plug set for any Ford 390 / 427 / 428CJ engine. 1967-70 Mercury Cougar and 1967-70 Ford Mustang. 20 piece set with threaded screw in plugs as shown. 

Price: $7.85

Buy Details

Availability: Rare / NOS Part
Item #: 33325 -

New Old Stock Ford small block Ford distributor shaft to engine block gasket, made of rubber. Fits all 260, 289, 302, 351w, 351c engines. 1959-76. This is a "O" ring rubber washer. Will not fit big block FE, 360, 390, 410, 427, 428 engines. Ford part number B9TF-12143-A.

Price: $4.85

Buy Details

Availability: Rare / NOS Part
Item #: 32883 -

New Old Stock Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 10619 -

Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

Price: $2.98

Buy Details

Availability: In-Stock Item
Item #: 31621 -

Gasket for mounting the oil filter adapter to any FE or Ford 360, 390, 410, 427, 428CJ engine. Name brand gasket, fits all 1967-70 Mercury Cougar or Ford Mustang with S, X, R, Q, or W code engines.

Price: $20.52

Buy Details

Availability: In-Stock Item
Item #: 14229 -

OEM Cork Style Oil Pan Gasket. Four Piece Gasket. 1967-70 Mercury Cougar and Ford Mustang, includes 1969-70 G code Boss 302 engines.

Price: $2.75

Buy Details

Availability: In-Stock Item
Item #: 10623 -

New water pump gasket for FE Ford engines. 1967-70 Mercury Cougar and Ford Mustang with 390/427/428CJ engines. Single gasket, two gaskets needed for installing your water pump. Price is for one gasket only.

Price: $4.62

Buy Details

Availability: In-Stock Item
Item #: 10621 -

New water pump gasket for 1967-69 Mercury Cougar and Ford Mustang with 289/302/351W. Single gasket for sealing water pump to water pump plate only.

Price: $196.17

Buy Details

Availability: In-Stock Item
Item #: 10018 -

If you're going to rebuild your engine, this is the item you'll want to get. It's the complete gasket set for your 289 and 302 engines. (Will not fit early Boss engines). Included in this kit are the following: Head Gaskets Intake GasketsOil Pan Gasket Rear Main SealExhaust Manifold Gaskets Valve Cover Gaskets Water Pump GasketsTiming Cover Gaskets Timing Cover SealWater Neck GasketFuel Pump GasketDistributor Gasket ...

Price: $22.35

Buy Details

Availability: In-Stock Item
Item #: 12960 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1967-70 big block Ford engines with size 390, 427, or 428 cubic inches, FE engine only. 1967-70 Mercury Cougar, Ford and Ford Mustang.

Price: $21.95

Buy Details

Availability: In-Stock Item
Item #: 10626 -

New timing cover gasket set for 1967-70 Mercury Cougar and most all Fords with 289/302/351W engines. Gasket set includes; timing cover gasket, crankshaft seal, water pump gasket for early or late water pumps, and the oil pan corner gaskets under the timing cover.

Price: $20.52

Buy Details

Availability: In-Stock Item
Item #: 10628 -

New timing cover gasket set for the 1967-70 Mercury Cougar and most Fords with 390-2V, 390-4V, 427-4V, and the 428 Cobra Jets. Gasket set includes; crankshaft seal, timing cover gasket, two water pump gaskets, fuel pump gasket, and oil pan to timing cover gasket.

Price: $27.87

Buy Details

Availability: In-Stock Item
Item #: 41604 -

Cork valve cover gaskets for any big block Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Price: $33.85

Buy Details

Availability: In-Stock Item
Item #: 41614 -

Rubber valve cover gaskets for any FE 390 or 428 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

Price: $258.33

Buy Details

Availability: Discontinued
Item #: 31678 -

Rebuilt early 289 harmonic balancer. or crank shaft dampener. C3AE-6316-G Cast iron construction with key way groove. Has the timing marks and date on rim. This one is dated L3, or November 1963. Application is late 1963 and early 1964 Ford or Mercury 289-2V or 289-4V engines. No core required, this was an oops on our part. 100% rebuilt by local reputable rebuilder. *Note - Not for the K code 271Hp 289 HiPo engines. Click on images to enlarge. This is a picture of a 40 year old piece...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 23837 -

C5AE-6316-A All 1967 and 1968 Mercury Cougar includes both C code 289-2V and A code 289-4V engines. 1967 and 1968 only, 6-5/16 inches in diameter, 3/4 inches thick, cast iron construction with key way groove. Has the timing marks on rim. Refundable $50.00 core charge when rebuildable C5AE-6316-A harmonic balancer is received by WCCC. *Note - Not for the K code 271Hp 289 HiPo engines.We don't offer that one because Ford never installed that engine in any Cougar. We can offer the rebuilding...

Price: $136.45

Buy Details

Availability: In-Stock Item
Item #: 14240 -

Unlike our rebuilt units that feature a lifetime warranty, these new units only carry a one year warranty and when you factor in the machining costs and steel cost you know that they cannot afford to sell them at this price and use the $200 dollar a gallon rubber used in our rebuilt units. In all fairness, Ford never used the extreme duty rubber back in the day either. That being said these are a decent unit at a reasonable cost, especially for those of you that have not core to exchange on...

Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18651 -

All 1967 and 1968 Mercury Cougar includes both C code 289-2V and A code 289-4V engines. 1967 and 1968 only, 6-5/16 inches in diameter, 3/4 inches thick, cast iron construction with key way groove. Has the timing marks on rim. The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option for those wanting to keep a 100% original looking appearance on a concours car that does not get driven or see...

Price: $258.33

Buy Details

Availability: In-Stock Item
Item #: 15110 -

Ford casting number C4AE-6316-A. All 1967 S code 390-4V engines. 1967 only, 6-5/8 inches in diameter, cast iron construction with key way groove. This is a combination crankshaft balancer and pulley. Has the timing marks on rim. Ford Master Part number C3AZ-6312-E. Refundable $80.00 core charge when rebuildable C4AE-6316-A harmonic balancer is received by WCCC.*Note - This harmonic balancer is generally covered up by an outer crankshaft pulley when options such as air conditioning and power...

Price: $77.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18499 -

Ford casting number C4AE-6316-A. All 1967 Ford S code 390-4V engines. 1967 (and earlier), 6-5/8 inches in diameter, cast iron construction with key way groove. This is a combination crankshaft balancer and pulley. Has the timing marks on rim. Ford Master Part number C3AZ-6312-E. The rubber in this used balancer will be the original and will not be showing cracks or signs of having shifted. This good quality used balancer is a good option for those wanting to keep a 100% original looking...

Price: $104.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18960 -

Correct for all 1967 Cougars with a 289. Keep in mind the Cougar never came factory with a 289 HiPo.