Electrical & Lighting

Dash color painted steel bezel that houses the courtesy switches with DEFOG on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL DEFOG. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-B. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

Dash color painted steel bezel that houses the courtesy switches with convertible top on all 1970 Mercury Cougar XR7's. This is the bezel that says MAP COURTESY PANEL TOP. May have some small pits, depending upon stock on hand. Plan on detailing them with your interior color for best results.Replaces Ford part number D0WB-10964-A. During assembly of your switches, note that the pins need to be on top. Switches and wiring harnesses sold individually. ...

No cracks or deterioration from UV rays.

This die cast bezel with a brushed finish was used from 1969 to the first part of 1970. This is a clean example with no pits or obvious scratches. The engineering number found on the back is C8AB-14505-B.

Poor condition with scratches and pitting as shown. This die cast bezel with a brushed finish was used from 1969 to the first part of 1970. The engineering number found on the back is C8AB-14505-B.

Good used bezel with no obvious scratches or pits. This bezel was used on the passenger door and both sides of the back seat in 1969 and on some earlier 1970 Cougars. The Ford engineering number found on the back is C8AB-14507-B.

Used grade "A" bezel used on the passenger side door and both rear seat switches. Looks similar to the 1970 bezel but is held in place with very hard to find clips not speed nuts. No pits or obvious scratches, Ford engineering number as seen from the back is C9AB-14A432-DFord part # is C9AZ-14528-A

Used grade A power window switch bezel for the Mercury Cougar. This bezel is used with all power window switches, except for the driver side door, and was only used on the 1973 model. Ford engineering # D3MB-14528-DA.

Good used bezel with obvious scratches and or pits. This bezel was used on the passenger door and both sides of the back seat in 1969 and on some earlier 1970 Cougars. The Ford engineering number found on the back is C8AB-14507-B.

Used grade B power window switch bezel for the Mercury Cougar. This bezel is used with all the power window switches, except for the driver side door, and was used on the 1973 model only. B grade, expect rust pitting in the chrome. Ford engineering # D3MB-14528-DA.

Used driver side (left hand) rear marker light bezel for any 1971-73 Mercury Cougar. Originally painted body color, flush mounted to the passenger side rear quarter panel. Has two attaching studs, and sometimes one locating stud. We often times find that the locating stud is broken or cut off. You will want to cut the corner stud off if using the available reproduction Mustang red rear reflectors. All of our bezels will have the 2 larger studs intact. See related items for new lenses and...

Used grade "B" passenger side (right hand) rear maker light bezel for the Mercury Cougar. We find that these are usually in better condition than the fronts, so we can offer you better quality at a lower price than we can the fronts. These same bezels can also be found on other full size 1970 Mercurys. Ford part # D0MB-15A466-A.

Used passenger side (right hand) rear marker light bezel for any 1971-73 Mercury Cougar. Originally painted body color, flush mounted to the passenger side rear quarter panel. Has two attaching studs, and sometimes one locating stud. We often times find that the locating stud is broken or cut off. You will want to cut the corner stud off if using the available reproduction Mustang red rear reflectors. All of our bezels will have the 2 larger studs intact. See related items for new lenses and...

Used grade "B" driver side (left hand) front side marker bezel for the Mercury Cougar. The 1970 Ford Torino and Maverick units look similar, but do not have the same angle or depth as the Cougar. These bezels are also unique to the 1970 Cougar. We do not have any of these bezels in "mint" condition, all of our lights will have minor blemishes like the unit shown. Ford part # D0WB-15A441-A.

Used grade "A" passenger side (right hand) front side marker bezel for the Mercury Cougar. The 1970 Ford Torino and Maverick units look similar, but do not have the same angle or depth as the Cougar. These bezels are also unique to the 1970 Cougar. We do not have any of these bezels in "mint" condition, all of our lights will have minor blemishes like the unit shown.Ford part # D0WB-15A440-B. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73...

Used grade "B" passenger side (right hand) front side marker bezel for the Mercury Cougar. The 1970 Ford Torino and Maverick units look similar, but do not have the same angle or depth as the Cougar. These bezels are also unique to the 1970 Cougar. We do not have any of these bezels in "mint" condition, all of our lights will have minor blemishes like the unit shown. Ford part # D0WB-15A440-B.

NOS bezel for the side marker lights on the Mercury Cougar or Ford Mustang. This is an original Ford replacement part. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars. Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Used grade "B" driver side (left hand) rear maker light bezel for the Mercury Cougar. We find that these are usually in better condition than the fronts, so we can offer you better quality at a lower price than we can the fronts. These same bezels can also be found on other full size 1970 Mercurys. Ford part # D0MB-15A466-A.

Reproduction bezel for the side marker lights on the Mercury Cougar or Ford Mustang. This unit features the correct contour that fits the car perfectly where other reproductions are often flat. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars. Includes speed nuts.Replaces Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Used bezel for the side marker lights on the Mercury Cougar or Ford Mustang. Used with front and rear 1969 marker lenses and fits almost all 1969 Ford and Mercury cars.  Ford part # C9AZ-15A440-A, casting # C9AB-15A466-A.

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Ford part # C9WB-13504 for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem?...

Good used driver side (left hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Driver side chrome tail light door or bezel. Ford part # D0WB-13504-A for the driver side. *NOTE* Need...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts.Ford part # C9WB-13449 for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts. Ford part # D0WB-13504-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

Good used passenger side (right hand) driver grade quality bezel with minimal, light pitting, ready to install and use as-is. If you are planning on sending in cores to be restored this is the level you would want to start with. The pitting found on this grade "B" bezel will be light and almost entirely restricted to the top surface which means it will only be seen when the trunk lid is opened. Passenger side chrome tail light door or bezel. Ford part # D0WB-13449-A for the passenger side....

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts.Ford part # C9WB-13449 for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

This is a poor condition bezel with pitting on all surfaces. It is a better than nothing type of part. We do not accept returns on grade C parts. Ford part # D0WB-13449-A for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great...

Driver side (left hand) front turn signal bezel for any 1969-70 Mercury Cougar. Our best quality bezels have no obvious pitting, scratches dents. Easy to detail part, polishing with fine steel wool, and an application of semi-gloss black paint and they will look great! Applications include 1969-70 Mercury Cougar, 1969 - 1970 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets. Ford part # C9WY-13210-A...

Passenger side front turn signal bezel for any 1969-70 Mercury Cougar. Our best quality bezels have no obvious pitting, scratches dents. Easy to detail part, polishing with fine steel wool, and an application of semi-gloss black paint and they will look great! Applications include 1969-70 Mercury Cougar, 1969 - 1970 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets.Ford part # C9WY-13210-A for the...

Starting in 1972 the 'Fasten Seat Belt' warning light was relocated to the center of the dash for visibility of all occupants of the vehicle. This is the bezel only that fastens to the instrument clusters of all 1972-73 Mercury Cougar models.Replaces Ford part # D2WB-10D841-AB.

Used grade "A" driver side (left hand) backup / reverse light bezel / housing for the Mercury Cougar. Our bezels are the best we can find with no cracks or pits. The chrome will be bright and almost completely free of lines or speckles. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for the unrestored, low mile car that you...

Used grade "B" driver side (left hand) backup / reverse light bezel / housing for the Mercury Cougar. These bezels may have slight cracks and pits in the chrome. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for a driver quality car. No exchange needed on this unit.Ford part # C9WB-15500-B. ...

Used grade "A" backup / reverse light bezel / housing for the passenger side (right hand) of the Mercury Cougar. Our bezels are the best we can find with no cracks or pits. The chrome will be bright and almost completely free of lines or speckles. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. There will most likely be thin chrome on the outer edges and other minor blemishes in the chrome. These are perfect for the unrestored, low mile car...

Used grade "B"  backup / reverse light bezel / housing for the passenger side (right hand) of the Mercury Cougar.  These units may have some cracks and pitting in the chrome. There will most likely be thin chrome on the outer edges and other blemishes in the chrome. The socket and pigtail will be in good condition and there will be no warp-age from over-tightening. These are perfect for the daily driver quality car. No exchange needed. Ford part # C9WY-15500-A. *NOTE*...

This kit consists of 3 single switch bezels identified with a D0WB-14507-A casting number and one master switch bezel with a C9AB-14A432-C casting number. You will need to add the black detail paint in the lettering and trim areas.Only cores with very minimal pitting can be given full credit as removing pits from the lettering and recessed border are pretty much impossible to do.

Beautifully reproduced set of chrome driver and passenger side taillight bezels for the 1969 Mercury Cougar. Replaces Ford part # C9WB-13504 for the driver side. Replaces Ford part # C9WB-13449 for the passenger side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here...

Reproduction pair of parking light bezels. Applications include 69 - 70 Mercury Cougar, 1969 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, 71 - 72 Maverick Grabber, 1973 - 1974 Maverick (until 8/12/74) and 1971 - 1974 Comet. Replaces Ford part # C9WY-13210-A for the passenger side, C9WY-13212-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned...

Good used pair ready to be cleaned and installed with no obvious blemishes. Applications include 1969-70 Mercury Cougar, 1969-70 Ford Mustang Shelby GT-350 and GT500, 1970 Mustang Sport Lamp Bezels, and starting in 1971 these were also used on Maverick Grabber and Comets. Ford part # C9WY-13210-A for the passenger side, C9WY-13212-A for the driver side. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic...

Used in 1967 - 1968 standard model Cougars without the optional clock. Usually these will have some amount of fading or minor discoloration in the paint as we keep the mint ones to build tachometers from.Check out the video below on our new gauge tester: ...

Used rear defog blower motor with integral fan. Ford supplied these for many years, some have different connectors on them. Some have the square style as found starting in 1973. We have a good supply of working and tested motors, so request the type of plug end you need.Replaces Ford part number C8AZ-18527-A and D3AZ-18527-A.

Kit comes complete with J bolts and mounting nuts. Replaces Ford Part #: D0AZ-10756-K.

Fastens the battery tray to the fender apron.

Billet aluminum batter hold down bracket for all 1967-70 Mercury Cougar and Ford Mustangs. Maximum battery width 6-3/4 inches. We also have stainless steel hold down bolts available.

This bracket connects the battery hold down clamp to the fender apron to stop the battery from rocking from side to side. Most cars are missing this crucial part to stabilize the battery. Replaces Ford Part #: D0OZ-10757-A.

These courtesy light brackets are located on the very outer right and left under the dash. Typically this bracket is found on the passenger side of 1967-68 Mercury Cougar and Ford Mustang without air conditioning. This is the long style bracket. There is also a short style for both the driver and passenger side courtesy light. If you have factory air conditioning you would want the short bracket that doesn't come into contact with the A/C plenum.Replaces Ford part number C7ZB-13763-A.Fits:1967...

These courtesy light brackets are located on the very outer right and left under the dash. Typically this bracket is found on the driver side of all 1967-68 Mercury Cougar and Ford Mustang. It is also used on the passenger side if you have air conditioning. This is the short style bracket. There is also a long style for both the passenger side courtesy light if you don't have factory air conditioning. If you have factory air conditioning you would want the short bracket that doesn't come into...

These courtesy light brackets are located on the very outer right and left under the dash. Sold individually, two required per car. Same bracket used on both sides. Replaces Ford part number C9ZZB-13763-A.Fits:1969 Mercury Cougar1969 Ford Mustang

Used bracket for holding either the emergency flasher or turn signal flasher on many Fords dating from 1963. We find these mainly in 1969-70 Mercury Cougar and Ford Mustangs. This holder attaches to one of two different relay mounting brackets. Couple of different designs were also used. Additionally there is also a different style of flasher mounting bracket. See our related items.Replaces Ford part number C3AB-13351.