Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 97-124 of 124
$0 Price: $93.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27486 -

Driver side stainless steel weather strip retainer for 71-73 Cougar and Mustang convertibles. This retainer screws to the windshield pillar post and holds the weather stripping for the front of your door window glass. Plan on replacing the weatherstripping. There is also the companion lower aluminum retainer listed on our site.These used stainless pieces generally polish up very well with 0000 steel wool. The little black plastic coated clip will be compromised due  to age and...

$0 Price: $69.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 27485 -

Passenger side stainless steel weather strip retainer for 71-73 Cougar and Mustang convertibles. This retainer screws to the windshield pillar post and holds the weather stripping for the front of your door window glass. Plan on replacing the weatherstripping. There is also the companion lower aluminum retainer listed on our site. These used stainless pieces generally polish up very well with 0000 steel wool. The little black plastic coated clip will be compromised due to age and heat.Replaces...

$0 Price: $47.07

Buy Details

Availability: In-Stock Item
Item #: 32803 -

Preproduction wiring harness, connects the convertible top switch to the pump on both the xr7 and standard model Cougars and Mustang 1969 - 1973 convertibles.

$0 Price: $88.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31218 -

Wiring harness segment to the convertible power top pump on any 1971-73 Mercury Cougar or Ford Mustang. Part number D1ZB-15A668-AB.

$0 Price: $169.88

Buy Details

Availability: In-Stock Item
Item #: 23892 -

C5ZZ-7610962-A Ford description of this plate is "Plate - Front floor lower cross member". All 1967-73 Cougar convertibles and all 1965-73 Ford Mustang convertibles use this plate. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. As you look at our picture below you will see the repro is about half the thickness. The repro is different in every detail but will work. We also have used plates with minor damage at a reduced cost.

$0 Price: $89.15

Buy Details

Availability: Out of Stock
Item #: 32000 -

Good reproduction reinforcing plate, contours are like the C5ZZ-7610962-A plate which was used through 1970. Thick steel like the originals, and with same contours. Bolts to the left hand and right hand lower floor reinforcement panels. Bolts into place with 6 hex bolts 3/8-16 x 1-1/8" with washers. These were painted satin black from the factory. Replaces Ford Part # C5ZZ-7610962-A. The Ford description of this plate is "Plate - Front floor lower cross member". All 1969 - 1973...

$0 Price: $59.27

Buy Details

Availability: Out of Stock
Item #: 32629 -

Driver side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel.  Ford part number D1ZZ-7653119-A.

$0 Price: $59.27

Buy Details

Availability: Out of Stock
Item #: 32630 -

Passenger side convertible frame assembly mounting and pivot bracket for all 1971-73 Mercury Cougar and Ford Mustang. Does not include the hydraulic cylinder bracket, cylinder mounting bracket sold separately. Bushings, bolts, and specialty fasteners not included. Mounts behind the quarter interior panel.  Ford part number D1ZZ-7653118-A.

$0 Price: $38.88

Buy Details

Availability: Out of Stock
Item #: 31306 -

Detachable mounting plate for installing the convertible ram cylinder to the convertible top frame assembly behind the quarter interior panel. Right and left are the same, fits all 1971-73 Mercury Cougar and Ford Mustang convertibles. Ford part number D1ZZ-76531A19-A.

$0 Price: $289.67

Buy Details

Availability: Out of Stock
Item #: 15323 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling. See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps (except the 6 on the interior panels), so any...

$0 Price: $13.62

Buy Details

Availability: Out of Stock
Item #: 42014 -

This pair of reproduction convertible top hooks are beautifully chrome plated and features correct thread size. Looks close to original. These hooks are actually for 71 - 73 Cougars and Mustangs, but will work just fine on the 69 - 70.

$0 Price: $264.63

Buy Details

Availability: Out of Stock
Item #: 15322 -

We have found a new manufacturer of the convertible top boots that are supposed to fit much better than the boots we were previously selling. See Pics Below. Ford calls this part the "folding top dust hood". Made from original pattern. Features long lasting vinyl. Includes foam pads. We stock the black and white. All other colors are ordered on demand from the manufacturer. Please note that convertible boots never came from the factory with snaps (except the 6 on the interior panels), so any...

$0 Price: $115.88

Buy Details

Availability: Out of Stock
Item #: 19748 -

These restored show quality mouldings are sold as a pair (driver and passenger side). They were used in conjunction with the door trim on XR7 models only. Located at the base of the quarter window and mounted horizontally on XR7 convertible models only. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

$0 Price: $69.89

Buy Details

Availability: Out of Stock
Item #: 27125 -

Restored show quality passenger side (right hand) horizontal quarter window moulding / trim. They were used in conjunction with the door trim on XR7 models only. Located at the base of the quarter window and mounted horizontally on XR7 convertible models only. Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores. ...

$0 Price: $316.89

Buy Details

Availability: Out of Stock
Item #: 26933 -

Used passenger side (right hand) convertible top boot trim moulding / trim for the Mercury Cougar convertible. If it were not for the paint over-spray on the black stripe of the drivers side piece these would be ready to bolt on and go! This is the best used example we have ever had in stock. We have several sets in stock with moderate to heavy pitting that are reasonably priced. Ford casting number reads D1WB-76423A18-AA or D1WY-76423A18-A. *Note - This item is not correct for a Ford Mustang. ...

$0 Price: $189.86

Buy Details

Availability: Out of Stock
Item #: 25468 -

This is the "Chrome" trim across the top of the windshield on the inside. This piece will need to be sandblasted and repainted. Many people have chromed these, but because of Federal safety regulations from the factory they were painted satin silver.Ford Part Number: D1ZZ-7603606-A.

$0 Price: $109.89

Buy Details

Availability: Out of Stock
Item #: 27330 -

This driver side moulding is correct for convertible. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket. The engineering number imprinted on the back is D1ZB-6503599 for 1971-1972 and D3ZB-6503599 for 1973. Convertibles show the same casting numbers on the part, but are a modified before assembly. We do have factory cut convertible mouldings both early and late. Ford part # D1ZZ-7603599, D1ZB-6503599-aw, D3ZZ-7603599, D3ZB-6503599-aw *NOTE* Excludes...

$0 Price: $109.89

Buy Details

Availability: Out of Stock
Item #: 27329 -

This passenger side moulding is correct for convertible. On convertibles the top portion is trimmed to allow it to slide under the sun visor bracket. The engineering number imprinted on the back is D1ZB-6503598 for 1971-1972 and D3ZB-6503599 for 1973. Convertibles show the same casting numbers on the part, but are a modified before assembly. We do have factory cut convertible mouldings both early and late. Ford part # D1ZZ-7603598. *NOTE* Excludes Mustang Fastback and Mach 1 models. ...

$0 Price: $109.04

Buy Details

Availability: Out of Stock
Item #: 27202 -

1971-72 Mercury Cougar convertible driver side. Our grade "A" rear quarter panel extensions have no obvious dings, scrapes, bumper contact damage or warping due to over tightening of the mounting studs. Please choose which side and year you need. There are very slight differences on 1973 and they do carry different part numbers. Ford casting # D1WB-7628519, Mercury MPC # D1WY-7628011-A. Do you have questions about your Cat's factory pinstriping? This link may help. ...

$0 Price: $109.89

Buy Details

Availability: Out of Stock
Item #: 27204 -

1971-72 Mercury Cougar convertible passenger side. Our grade "A" rear quarter panel extensions have no obvious dings, scrapes, bumper contact damage or warping due to over tightening of the mounting studs. Please choose which side and year you need. There are very slight differences on 1973 and they do carry different part numbers. Ford casting number D1WB-7628518, Mercury MPC number D1WY-7628010-A. Do you have questions about your Cat's factory pinstriping? This link may help. ...

$0 Price: $315.77

Buy Details

Availability: Out of Stock
Item #: 32621 -

Driver side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar convertible. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-7610125-B.* Note - this item has dimensions in excess of 75 inches, and will ship as...

$0 Price: $315.77

Buy Details

Availability: Out of Stock
Item #: 32622 -

Passenger side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar hard top. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-7610124-B.* Note - this item has dimensions in excess of 75 inches, and will...

$0 Price: $459.86

Buy Details

Availability: Out of Stock
Item #: 12858 -

This panel was used on all convertible models without retractable rear belts. Please contact us for choice of color, power or manual windows and with or without seat belt re-tractors. It will not show serious UV damage with the "chalky look" and will have no extra holes drilled.

$0 Price: $46.85

Buy Details

Availability: Out of Stock
Item #: 32854 -

NOS new old stock driver side (left hand) horizontal quarter window outer weather strip. This is just the one outer weather strip that attaches to the body or XR7 convertible moulding. This rubber piece is included in our reproduction Standard or XR7 convertible belt line kits for 1971-73 Mercury Cougar. Ford part number D1WY-7629733-A.

$0 Price: $46.85

Buy Details

Availability: Out of Stock
Item #: 32853 -

NOS new old stock passenger side (left hand) horizontal quarter window outer weather strip. This is just the one outer weather strip that attaches to the body or XR7 convertible moulding. This rubber piece is included in our reproduction Standard or XR7 convertible belt line kits for 1971-73 Mercury Cougar. Ford part number D1WY-7629732-A.

  • Next >