Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 145-192 of 284
Price: $13.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 31340 -

Black plastic selector button for all 1973 Mercury Cougar and Ford Mustang with automatic transmission. It does not fit with the 1968-72 chromed T-handle.  Check out our video on rebuilding your shifter below: ...

Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10453 -

Black plastic dummy button for all 1967 Mercury Cougar and 1965-67 Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is the non-moving button on the right side of your shifter handle. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had simulated leather wrapping. Ford part C5ZZ-7C488-D.

Price: $6.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10692 -

Black plastic dummy button for all 1968-72 Mercury Cougar and Ford Mustang with automatic transmission. This is for all cars with body type 65A, 65C, 63A, or 76A. This is the non-moving button on the right side of your shifter handle. This is for all cars with body type 65A, 63A, or 76A. This is for the base model shifter handle. Deluxe shifters were larger and had faux leather wrapping. Ford part C8ZZ-7C488-A.

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19838 -

This arm is attached to your automatic transmission floor shifter (see picture at left). Ford calls technical name for this part is 'Arm, Support'. These used parts will come with an intact bushing and nut. Correct for C-4 and C-6 transmissions. Ford part number C7ZZ-7302-A. ...

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10471 -

This arm is attached to your automatic transmission floor shifter (see picture at left). Fits all 1969-70 Mercury Cougar and Ford Mustang. Ford calls technical name for this part is 'Arm, Support'. These used parts will come with an intact bushing and nut. Correct for FMX and C-6 transmissions. Ford part number C9ZZ-7302-A. This part may have the course threads or fine threads. Normally this item ships with the course threads. We also stock the 1971-73 version that has a captured stud for...

Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18864 -

This arm is attached to your automatic transmission floor shifter. Fits all 1969-73 Mercury Cougar and Ford Mustang. Ford calls technical name for this part is 'Arm, Support'. This used part will come with a captured lower stud for attaching the shift rod as shown. Correct for FMX and C-6 transmissions. This version is found on 1972-73 cars, it has the captured lower stud for mounting the automatic shift rod to the transmission. Ford part number D1ZZ-7302-A. Check out our video on rebuilding...

Price: $15.55

Buy Details

Availability: Out of Stock
Item #: 15784 -

It is as nice as it looks! Good fit. Replaces Ford Part #: C9ZZ-7E271-A Customer reviews: Called WCCC the other day after calling around to a lot of garages and auto parts stores trying to find out the torq specs for my rocker arms on my Cougar. I wanted to check to make sure they where in specs when I was replacing my valve cover gaskets. No one I called could tell me because it wasn't on there computer. At WCCC they said they were not sure but looked it up in a manual. That's customer...

Price: $3.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41370 -

Automatic shifter dial black background. This part screws to the shifter bucket, and sits under the pointer when everything is assembled in your shifter bucket assembly. Fits all 1969-73 Mercury Cougar and Ford Mustangs with automatic transmissions. Original Ford part number C9ZZ-7A213-A also can be D1ZZ-7A213-A. Check out our video on rebuilding your shifter below: ...

Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 10488 -

Attaches to the console shifter bezel on any 1967-68 Mercury Cougar or Ford Mustang. We occasionally have these available when we get broken console bezels. This shifter dial was originally attached with heat to a pin connector. To reattach we suggest using glue. These look like it would be easy to detail the white letters for P R N D 2 1 with a careful hand. May have a chipped corner that is not seen when installed. Ford part # C7ZA-7A213A Check out our video on rebuilding your shifter below: ...

Price: $120.02

Buy Details

Availability: In-Stock Item
Item #: 16794 -

Restored shifter T handle as found starting in 1968 and through, 1972 Mercury Cougar and Ford Mustang with automatic transmissions. This handle will actually fit on most Ford automatic floor shift levers of the era. Design is a little thicker in the body, compared to earlier designs. Core charge applies. Replaces Ford part number C8OZ-7213-A. Check out our video on rebuilding your shifter below: ...

Price: $120.02

Buy Details

Availability: In-Stock Item
Item #: 16758 -

Restored shifter T handle as found on all 1973 Mercury Cougar or Ford Mustang with automatic transmissions. This handle will actually fit on most Ford automatic floor shift levers of the era. Design is a little more ergonomic in design, compared to earlier designs. Core charge applies.Replaces Ford part number D3OZ-7213-A.

Price: $13.95

Buy Details

Availability: In-Stock Item
Item #: 13855 -

Precision molded clear plastic with black background under red arrows and white letters. Ford part number C5ZZ-7B052-E. Check out our video on rebuilding your shifter below: ...

Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 41366 -

Used to block light from escaping around shifter stem seal. Fits 1969-73 Mercury Cougar and Ford Mustang as well as 1971+ Pinto, Bobcat, Maverick, and Comet with floor shift automatic transmissions. The 90 degree notched portion straddles the set screw on the cast light housing. Most shifters (almost all) we see do not have this part in place any longer. Ford part number C9ZZ-7E130-A.Note: This fits perfectly on the shifters we have tried, but several customers have commented that it was too...

Price: $9.15

Buy Details

Availability: In-Stock Item
Item #: 10903 -

Reproduction of the little plastic shift indicator arrow, that is illuminated by the little bulb in your shifter housing. Fits 1969-73 Mercury Cougar and Ford Mustang. Also fits 1971 and newer Pinto, Bobcat, Maverick and Comet with floor shift automatic transmissions. Ford part number C9ZZ-7A110-A. Check out our video on rebuilding your shifter below: ...

MSRP:$24.84
Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41368 -

This fragile little plastic arrow is illuminated by the little bulb in your shifter housing. Fits 1969-73 Mercury Cougar and Ford Mustang. Also fits 1971 and newer Pinto, Bobcat, Maverick and Comet with floor shift automatic transmissions. Ford part number C9ZZ-7A110-A. Check out our video on rebuilding your shifter below: ...

Price: $105.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19033 -

Used on both XR7 and standard Cougar consoles. Differs from shifters made for non console use in that is has a small loop to connect the white plastic arm to the shift indicator light. Fits 1967-68 Mercury Cougar and Ford Mustang with factory consoles. Good used part no heavy pitting on the chrome, comes with complete with cable assembly inside. Ford part number C7ZZ-7210-C. Check out our video on rebuilding your shifter below: ...

Price: $95.85

Buy Details

Availability: In-Stock Item
Item #: 19777 -

Restored chrome automatic shifter lever for some 1970 Mercury Cougar or Ford Mustang, and all 1971-73 Cougar and Mustangs, with or without consoles. Sometime in the 1970 era, Ford switched to a larger pawl. Easy to identify if you look at the slit on the lever. We sell these bare for those car owners that have pitted shifter levers. Ford part number C9ZZ-7210-C. *Note - Chromed lever only, sold without cable, pawl, handle, etc. Check out our video on rebuilding your shifter below: ...

Price: $95.85

Buy Details

Availability: In-Stock Item
Item #: 22544 -

Restored chrome automatic shifter lever for any 1969 and most 1970 Mercury Cougar or Ford Mustang with or without consoles. Sometime in the 1970 era, Ford switched to a larger pawl. Easy to identify if you look at the slit on the lever. We sell these bare for those car owners that have pitted shifter levers. Ford part number C9ZZ-7210-A. *Note - Chromed lever only, sold without cable, pawl, handle, etc. Check out our video on rebuilding your shifter below: ...

Price: $95.85

Buy Details

Availability: In-Stock Item
Item #: 10494 -

Restored chrome automatic shifter lever for any 1967-68 Mercury Cougar or Ford Mustang with consoles. This console lever is unique to console equipped cars, it has a tab with a hole in it for accepting the shift indicator indicator rod. We sell these bare for those car owners that have pitted shifter levers. Ford part number C7ZZ-7210-C. *Note - Chromed lever only, sold without cable, pawl, handle, etc. Check out our video on rebuilding your shifter below: ...

Price: $95.85

Buy Details

Availability: In-Stock Item
Item #: 10493 -

Restored chrome automatic shifter lever for any 1967-68 Mercury Cougar or Ford Mustang without consoles. The 1967-68 is similar to the 1969-73 shift lever, but has the additional chrome window section for holding the indicator light. These have been re-chromed, we sell these bare for those car owners that have pitted shifter levers. Ford part number C7ZZ-7210-A. This lever was also used on the 1968 XR7-G cars with unique consoles.*Note - Chromed lever only, sold without cable, pawl, handle,...

Price: $96.45

Buy Details

Availability: In-Stock Item
Item #: 10229 -

Reproduction shifter assembly for the Mercury Cougar or Ford Mustang equipped with the automatic transmission, but without a center console. Check out our video on rebuilding your shifter below: ...

Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10497 -

Complete chrome automatic shifter lever assembly for any 1969-73 Mercury Cougar or Ford Mustang with or without consoles. This is the late version with wider width pawl. Good used part no heavy pitting on the chrome, we sell these levers with installed cable, pawl, spring, and gear release assembly. Ford part number for the lever is C9ZZ-7210-C. *Note - Chromed lever internals only, no T handle. Check out our video on rebuilding your shifter below: ...

Price: $83.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10495 -

Complete chrome automatic shifter lever assembly for any 1967-68 Mercury Cougar or Ford Mustang without consoles. The 1967-68 is similar to the 1969-73 shift lever, but has the additional chrome window section for holding the indicator light. Good used part no heavy pitting on the chrome, we sell these levers with installed cable, pawl, spring, and gear release assembly. Ford part number for the lever is C7ZZ-7210-A. This lever was also used on the 1968 XR7-G cars with unique consoles. *Note -...

Price: $72.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10496 -

Complete chrome automatic shifter lever assembly for any 1969-73 Mercury Cougar or Ford Mustang with or without consoles. This is the early version with small width pawl. Good used part no heavy pitting on the chrome, we sell these levers with installed cable, pawl, spring, and gear release assembly. Ford part number for the lever is C9ZZ-7210-A. *Note - Chromed lever and internals only, no T handle. Check out our video on rebuilding your shifter below: ...

Price: $14.55

Buy Details

Availability: In-Stock Item
Item #: 41371 -

Lamp diffuser for all 1969-73 Mercury Cougar and Ford Mustangs. Note the comparison picture. The reproduction is a shade or two lighter than original. The complete Ford part number is not available, the basic part number for this item is 15811. Check out our video on rebuilding your shifter below: ...

Price: $36.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 23491 -

This is a good used pit free part (at least in the area that shows from beneath your pad) that still has the rear clip in place. You will see this same part in Mustang catalogs for $125.00. The only difference between Mustang and Cougar is that the Cougar has holes drilled in it for the pad that lays on top of it. Not for use with the 1968 standard console.

Price: $18.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 73164 -

Has very small blemishes in chrome around the shift stem opening. May or may not have the rear clip in place. You will see this same part in Mustang catalogs for $125.00. The only difference between Mustang and Cougar is that the Cougar has holes drilled in it for the pad that lays on top of it. Not for use with the 1968 standard console. 

Price: $89.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19094 -

Driver quality part with some obvious pitting. Used on the xr7 console 1967-1968 and the standard Cougar in 1967. Not used on Mustang due to the holes drilled for the Cougar unique pad.Engineering number as seen on the back reads C7ZB-7B233-A / C7WB-7B233-A

Price: $171.55

Buy Details

Availability: In-Stock Item
Item #: 41944 -

This quality reproduction 1967 Mustang part can easily be made to fit your 1967 - 1968 XR7 or 1967 standard Cougar manual transmission console simply by drilling the two holes near the front for the spring clips that attach the pad to the console. See the diagram below for correct hole size and location. This plate was used on both three and four speed manual transmission Cougars equipped with the optional center console. Not for use on 1968 standard / decor consoles. Replaces Ford Part #:...

MSRP:$23.85
Price: $19.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41372 -

Automatic shifter cable with slot on the threaded end for all 1969-73 Mercury Cougar and Ford Mustangs. Will also work on 1967-68 but features a slot at bottom so as to remove or adjust easily. The 1967-68 version did not have this slot. Ford part number C9ZZ-7D246-A with the slotted threaded stud on the end. Also fits 1971+ Maverick & Comet with automatic floor shifters. Restoration Hint - We suggest purchasing this upgraded cable for use in 1967-68 shifter levers. Much easier to install, and...

Price: $23.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10464 -

Automatic shifter arm pawl - early version. Mounts inside the bottom of the shifter arm in the slot with the cable and spring. Fits original chromed shifter levers or arms 1967-70 Mercury Cougar, 1965-70 Ford Mustang, and 1965-66 Ford and Mercury full size cars with floor shift automatic transmissions. The early pawl has a key with a thickness of 0.100", the later (1970ish-73) with a thickness of 0.159". Check your shift lever for the size that you need, this early pawl has a Ford part number...

Price: $165.02

Buy Details

Availability: In-Stock Item
Item #: 13472 -

Complete console shift assembly for the 67 - 68 Cougar or Mustang. Included in this kit are the T-shifter assy, lever assy, housing and the shifter arm. Ford part numbers: C7ZZ-7210C C7ZZ-7A306A C7ZZ-7302A C7ZZ-7213M Check out our video on rebuilding your shifter below: ...

Price: $325.00

Buy Details

Availability: In-Stock Item
Item #: 33383 -

Reproduction console shift assembly for the 69 - 73 Cougar or Mustang. Included in this kit are the T-shifter assy, lever assy, housing and the shifter arm, seals and hardware. Replaces Ford part numbers: C7ZZ-7210C C7ZZ-7A306A C7ZZ-7302A C7ZZ-7213M Check out our video on rebuilding your shifter below: ...

Price: $42.17

Buy Details

Availability: In-Stock Item
Item #: 13782 -

Excellent high quality reproduction of the automatic transmission shifter bezel / indicator assembly for the 1967 and 1968 Mustang without console and 1968 Mercury Cougar XR7-G with XR7-G console. While not technically correct, this bezel can also be used on non-console Cougars (1967-1968) without modification. Ford part # C7ZZ-7D443-C. Check out our video on rebuilding your shifter below: ...

Price: $43.97

Buy Details

Availability: In-Stock Item
Item #: 13815 -

Excellent high quality reproduction of the automatic transmission shifter bezel / indicator assembly for the Mercury Cougar or Ford Mustang. Great savings when you consider this already has the seal and indicator lens included. Many Mustang vendors only offer the 71 - 73 plastic version of this assembly. Floor seal not included. This will also work (exact fit) on your 1971 - 1973 Mercury Cougar but will not be correct as the plastic version was used in 71-73.  This is a very nice upgrade...

Price: $38.18

Buy Details

Availability: In-Stock Item
Item #: 13813 -

MSRP: $62.50 This exact reproduction of the shifter bezel / indicator assembly that is front and center in your interior. The originals almost always started to look poor after a few decades. The 1969 - 1970 version of this shifter cover is a very nice upgrade for 1971 - 1973 owners. Replaces Ford part # D1ZZ-7D443-A Check out our video on rebuilding your shifter below: ...

Price: $49.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19730 -

Used automatic floor shift bezel for all 1967-68 Mercury Cougar with automatic transmissions without factory consoles. Grade B will have some pitting and or scratches in the chrome. The rubber piece where the shift lever comes out will also be torn.  Check out our video on rebuilding your shifter below: ...

Price: $63.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 16155 -

Bare automatic shifter bucket or housing for use with the large pawl (0.160") shifter levers. Fits most 1970 Mercury Cougar and Ford Mustangs with or without console. Check the thickness of the pawl on your shifter lever. There are two different sizes and need to be matched for optimum fit. Early pawls were 0.100" thick, sometime in early 1970 through 1973 the pawls were made larger at 0.159". We recommend purchasing new bushings prior to installation. Replaces Ford part number C9ZZ-7A306-?...

Price: $65.57

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 41381 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Price: $63.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10469 -

Bare automatic shifter bucket or housing. Fits all 71 -73 Mercury Cougar and Ford Mustangs with or without console. Also fits 1971+ Maverick and Comet with automatic floor shifters. If one runs with really worn shifter bushings for too long the hole in the side that the shifter arm passes through may be worn beyond tolerances. Ford part number D1ZZ-7A306-A. We inspect the shift detentes and the hole where the bushings go for wear. This bucket is different than the 1969-70 version as shown on...

Price: $53.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19138 -

This shifter bucket is used on all 1967 - 1968 Mercury Cougars and Ford Mustang with an automatic center console. Bare bucket with good shift detentes and bushing hole that isn't worn out. Ford part number C7ZZ-7A306-A Check out our video on rebuilding your shifter below: ...

Price: $80.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 10474 -

This shifter bucket is used on all 1967 - 1968 Mercury Cougars and Ford Mustang without an automatic center console. Bare bucket with good shift detentes and bushing hole that isn't worn out. Ford part number C7ZZ-7A306-B. Check out our video on rebuilding your shifter This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to...

Price: $2.88

Buy Details

Availability: In-Stock Item
Item #: 20122 -

If your automatic floor shifter has play in it left to right then this is the culprit. Easy to install, (more difficult if you have a 67-68 with center console) these are made from a wear resistant plastic that is better than original. Sold as a pair as two are required per car. This bushing was used in all Ford products equipped with a floor shift automatic from the 1965 Mustang to the late 70's Pinto. Replaces Ford Part # C5ZZ-7A133-A Check out our video on rebuilding your shifter below: ...

Price: $55.89

Buy Details

Availability: In-Stock Item
Item #: 30824 -

Fit and and function wise this is the same as the 1968 - 1973 XR7 button. However if you want 100% correctness then the 1967 button is different and there are no reproductions for this exact button. The 1967 button has a concave surface, while the 1968-73 button is convex. See the comparison photo below with the 67 deluxe button (Left) next to the 68-73 button (Right). This is a replated part with no pits or cracks. Ford part number C7ZZ-7C488-B. $20 refundable core charge will be added. Click...

Price: $38.88

Buy Details

Availability: In-Stock Item
Item #: 31250 -

Rechromed 1967 deluxe shifter button. Unique to the deluxe faux leather wrapped T handle shifter starting in 1967. One year only design, this one has a convex button for you thumb. Starting in 1968 the button was more rounded to comply with the added safety features mandated in 1968. Core deposit is required, fully refundable with returned 1967 deluxe button. Ford part number C7ZZ-7C488-B. Check out our video on rebuilding your shifter below: ...

Price: $35.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 19044 -

Fit and and function wise this is the same as the 1968 - 1973 XR7 button and we suggest the quality reproduction we offer as a good replacement. However if you want 100% correctness then the 1967 button is different and there are no reproductions for this exact button. The 1967 button has a concave surface, while the 1968-73 button is convex. See the comparison photo below with the 67 deluxe button (Left) next to the 68-73 button (Right). This is a good used part with no pits or cracks. Ford...

Price: $8.45

Buy Details

Availability: In-Stock Item
Item #: 10341 -

Steel retaining plate. Ford part number C5ZZ-7B233-A. This plate is needed to fasten the shift indicator bezel on non-console cars. Fits 1967-68 Mercury Cougar and 1965-68 Ford Mustang, without console. Nice reproduction part, better value than used. You may also need a set of 4 attaching screws. Check out our video on rebuilding your shifter below: ...