Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
'https://cdn.cougparts.com/dc/1000701/1331245021.jpg','https://cdn.cougparts.com/dc/1000701/1331245020.jpg'
  • Mounting Bracket - Throttle Cable - 351W-4V / 428CJ / SCJ - Repro ~ 1969 Mercury Cougar / 1969 Ford Mustang - 26533
  • Mounting Bracket - Throttle Cable - 351W-4V / 428CJ / SCJ - Repro ~ 1969 Mercury Cougar / 1969 Ford Mustang - 26533

Item #: 26533

Login to add this item
to a saved wishlist
Price: $54.55
    Cost: 4364
    Earns: 219
    Bonus: 0

    Availability

    In-Stock Item - Next Business Day

    Applications

    Description

    Bracket that mounts to the rear Carburetor mounting holes of all 1969 351-4V and 428 Cobra Jets or Super Cobra Jets. Has the square hole that holds the factory throttle cable and hole for the return spring. *Note - This is not a flat bracket like the 1970 351C-4V. There is a distinct drop in the bracket to clear the underside of the Holley carburetor on Cobra Jet equipped cars.
    Specifications:
    Shipping Weight: 0.50 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    5.00 out of 5 stars
    Based upon 2 Review(s).
    5 Stars
    100%
    4 Stars
    0%
    3 Stars
    0%
    2 Stars
    0%
    1 Stars
    0%

    Mounting Bracket-Throttle Cable-351W-4V

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Bracket to engine data 100% correct
    • Bracket fit perfectly
    Cons:
    When I purchased my 69 Cougar, someone had tried putting an aftermarket Holley on it. They tried using, what I thought was, the original mounting bracket and had mauled it quite badly. Not knowing that there were several different carburetor-specific brackets offered for different engines, I straightened, welded, ground and bead-blasted the one I had and remounted it after my original carburetor returned from restoration. The throttle cable was improperly positioned, the carb linkage didn't return to base and the trans kickdown linkage wouldn't operate properly. Only after looking closely at all the different throttle brackets you offered did I discover that the bracket I had was for a 2-V carb. Your bracket to engine application was 100% correct. I ordered this bracket and it fit perfectly!

    SW Portland
    2013

    Good Bracket but expensive

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Strong and good looking
    Cons:
    Good quality bracket but costly. Needed it since I'm changing my 69 351W-2V to a 4V.
    Bracket is the correct distance for linkage but with a Edelbrock AVS2 4 barrel, the bracket will need to be cut and extended 2" towards the drivers side. Probably better for me instead of making a complete custom bracket up.

    Number of questions: 0
    Please login to ask a question.

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)
    I was having difficulty placing my order on the website and spent a couple of hours trying with no luck (ending in immense frustration). I decided to finally just call and order my parts over the phone (4 small items). Was surprised that Don Rush...
    - Tim (1969 Cougar XR7)
    Brake booster failed on our 1970 Mach1. We had ordered a new 2022 Mach1 to match the old one and the dealer wanted to use both cars in a promotional ad. When we received the replacement booster it failed within a few minutes of installation. I...
    - Alan
    WCCC makes finding the right part with the right fit easy. I love that they try to get great parts and when there are parts that don't meet their standard they WARN you up front! I've bought new reproduction parts from them, used parts and even had...
    - Daniel
    I6A11