Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
'https://cdn.cougparts.com/dc/26480/1606252138_a.jpg','https://cdn.cougparts.com/dc/26480/1606252139_a.jpg','https://cdn.cougparts.com/dc/26480/1606252140_a.jpg','https://cdn.cougparts.com/sc/images/1000644.jpg'
  • Weatherstrip / Seal - Rear Window - Repro ~ 1969 - 1970 Mercury Cougar - 26480
  • Weatherstrip / Seal - Rear Window - Repro ~ 1969 - 1970 Mercury Cougar - 26480
  • Weatherstrip / Seal - Rear Window - Repro ~ 1969 - 1970 Mercury Cougar - 26480
  • Weatherstrip / Seal - Rear Window - Repro ~ 1969 - 1970 Mercury Cougar - 26480

Item #: 26480

Login to add this item
to a saved wishlist
Price: $37.35
    Cost: 2988
    Earns: 150
    Bonus: 0

    Availability

    In-Stock Item - Next Business Day

    Applications

    Description

    You will need new window gaskets if you plan on changing the headliner. Replaces Ford part #: C9WY-6542084. Installing it yourself? bedding compound is required for a complete seal.

    Here are some useful tips on installing this seal made by DCMR.

    From KTL Restorations; Our cure for installing this less than perfect fitting reproduction is to use the longer trim clips (black ones). The clips Ford used were red oxide and the reproduction clips are green. The black clips extend up about 3/32 of an inch further, this should be enough to grab the trim. Also, not all of the clip posts were in the same location as far as some being higher or lower which would puts the clip closer to the pinch-weld or near the body line. Sometimes he has to use a combination of clips is needed to complete the job. You have to be careful not to get the clips too high or the trim will be loose.

    From Cascade Classics; My trick is I put the seal on the body of the car first and then work the glass in. It is a pain in the a%# but it works. The clips I use are #387. Ford part number D1AB-6545413-AB or C5ZZ-6542413-B. I have never had a problem with them.

    From Jeff B, President on the Cascade Cougar Club; I use a dremel tool to bring the height of the rubber seal down as the only reproduction made (by DCMR) sits up a little too high.

    Specifications:
    Shipping Weight: 3.50 LBS
    (weight shown may be the dimensional weight)

    This item must ship via

    review-star review-star review-star review-star review-star

    4.13 out of 5 stars
    Based upon 6 Review(s).
    5 Stars
    17%
    4 Stars
    33%
    3 Stars
    17%
    2 Stars
    0%
    1 Stars
    0%

    Weatherstrip/Seal-Rear Window-Repro-69 to 70 Merc Cougar

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Good quality rubber
    • Fit ok
    Cons:
    • Makes trim install difficult
    The add warns you up front that this weatherstrip is meatier than the originals. The extra thickness makes it difficult to replace the trim/moulding; probably why the clips I bought didn't work well. The rubber is good quality and, all-in-all, it fit ok.

    Austria
    2019

    Rear Windshield XR7 1969

    3.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • to high
    • seal to high
    Cons:
    Seal is too high. Without repositioning the clips and reworking the rubber seal in the upper side window area, it is not possible to fix the trim strips. The adjustable clips weren't the solution either. I had to do the whole thing 3 times until I was able to mount the trim with the repositioned clips and the reworked seal. (I cut the gasket in the upper side areas with a scalpel so that the gasket is about 2mm lower).3 times a real mess, 3 seals used. I don't recommend doing this alone.

    2018

    Good Replacement

    3.50 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    rice replacement stripping when replacing rear glass. did not fit perfect as others have stated, causing chrome to not quite fit tight. however no leaks and should be able to modify a bit to get tighter fit

    Rear Winshield Seal

    4.25 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    • Good quality
    • looks likie OEM
    Cons:
    • Doesn't fit well. Too thick at points
    The seal is made of good material and looks like OEM, but I was told in product description that this wouldn't fit well and it didn't. The channel that sits on the metal edge doesn't seem deep enough to fit well where the sheet metal overlaps. This cause the seal to choke up and roll back especially near the corners. it was impossible to get several of the trim clips to latch because the seal was too high at several points near the corners.

    Langley B.C.

    Weatherstrip / Seal - Rear Window - Repro ~ 1969 - 1970 Mercury Cougar 1969,1969 cougar,1970,1970 cougar,c9w,cougar,d0w,head,headliner,liner,mercury,mercury cougar,new,rear,repro,reproduction,seal,weatherstrip,window,seal,gasket,weather,strip,rubber Weath

    5.00 out of 5
    Material:
    review-star review-star review-star review-star review-star
    Fit:
    review-star review-star review-star review-star review-star
    Craftsmanship:
    review-star review-star review-star review-star review-star
    Correctness:
    review-star review-star review-star review-star review-star
    Pros:
    Cons:
    Good quality fits in good

    Number of questions: 0
    Please login to ask a question.

    Why am I being warned about potential exposure to chemicals in motor vehicle parts?


    • Some chemicals in motor vehicle parts are on the Proposition 65 list because they can cause cancer and/or birth defects or other reproductive harm.
    • When purchasing USED or NOS items, we do not know if listed chemicals are present in these products.
    • This product is known to contain the following listed chemicals:
    WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...
    - Jim Davis
    I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...
    - Voodochild5
    What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...
    - Kenneth Milden
    I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...
    - Denver
    I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...
    - pandamonium2112
    I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...
    - Rod (Saskatchewan, Canada)
    I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...
    - Rod (Canada)
    I was having difficulty placing my order on the website and spent a couple of hours trying with no luck (ending in immense frustration). I decided to finally just call and order my parts over the phone (4 small items). Was surprised that Don Rush...
    - Tim (1969 Cougar XR7)
    Brake booster failed on our 1970 Mach1. We had ordered a new 2022 Mach1 to match the old one and the dealer wanted to use both cars in a promotional ad. When we received the replacement booster it failed within a few minutes of installation. I...
    - Alan
    WCCC makes finding the right part with the right fit easy. I love that they try to get great parts and when there are parts that don't meet their standard they WARN you up front! I've bought new reproduction parts from them, used parts and even had...
    - Daniel
    I5A03