Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Bypass Heater Hose Nipple - 3" - 390 / 428CJ - Concours Correct - Repro ~ 1968 - 1970 Mercury Cougar - 1968 - 1970 Ford Mustang

Reproduction Concourse 3" Heater Hose Nipple for the 1968, 1969 and 1970 Mercury Cougar or Ford Mustang

1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

1 Review(s) 0

Item #: 41704

Price: $34.05

Cost: 2724

Earns: 137

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1968 Mercury Cougar
1969 Mercury Cougar
1970 Mercury Cougar
1968 Ford Mustang
1969 Ford Mustang
1970 Ford Mustang

Description

Concourse correct 3" long nipple that installs in the water pump, with the correct plating.

C8OZ-18599-A.

Specifications:

Shipping Weight: 0.25 LBS

(weight shown may be the dimensional weight)

1 Reviews (5.00 of 5 Rating)

5.00 out of 5 stars
Based upon 1 Review(s).

5 Stars

100%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

Scott

Nice part

7/30/2016

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

very correct

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 41707 [More info]
[More info] Elbow - Heater Hose - 390 / 427 / 428CJ - Concours Correct - Repro ~ 1968 Mercury Cougar / 1968 Ford Mustang
Concourse Correct 90 degree elbow that attaches to the intake manifold and provides proper clearance for the emission canister and air cleaner housing. Correct for all 1968 S code 390-4V, W code 427-4V and R code...

Buy

$51.75
Frequently
Purchased With

Item #: 13973 [More info]
[More info] 390 - 428 CJ - Radiator Hose Kit - With FoMoCo Logo - With Clamps - Repro ~ 1969 - 1970 Mercury Cougar - 1969 - 1970 Ford Mustang
NOTICE: The supplier is no longer making the previous version of the upper hose, and the new hoses will have more of a textured outer wall. Some Vendors show C8ZE for the upper hose, but C8WE is the correct...

Buy

$63.64
Frequently
Purchased With

Item #: 41779 [More info]
[More info] Hose - Heater Valve to Heater Core - w/ A/C - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Both ends have 90 degree molded ends. Attaches heater core to water heater control valve.Replaces Ford Part #: C7ZZ-18472-CVAC.

Buy

$40.91
Frequently
Purchased With

Item #: 42050 [More info]
[More info] Elbow - Water Inlet - 390 / 428CJ - Chrome - Repro ~ 1967 - 1970 Mercury Cougar - 1967 - 1970 Ford Mustang
These bright beautiful reproductions replace those corroded and rusty originals that just look nasty. Replaces Ford Part #: C8AZ-18599-C

Buy

$41.35
Frequently
Purchased With

Item #: 26146 [More info]
[More info] Fastener Kit - Alternator - 390 / 428 - Repro ~ 1967 - 1970 Mercury Cougar / 1967 - 1970 Ford Mustang
Reproduction alternator mounting kit for the Mercury Cougar or Ford Mustang equipped with the 390 or 428 engine. Spacer not included, but available.

Buy

$18.15
Frequently
Purchased With

Item #: 14-0029 [More info]
[More info] Thread Sealant - High Temp - New ~ 1967 - 1973 Mercury - 1967 - 1973 Ford
New thread sealant specially formulated to seal liquid in high temperature applications.

Buy

$5.29
Frequently
Purchased With

Item #: 11998 [More info]
[More info] Push on Retainer - A/C Heater Box Shafts - Repro ~ 1967 - 1973 Mercury Cougar - 1967 - 1973 Ford Mustang
Push on retainer for heating and air conditioning box levers or shafts. Fits 3/16 inch studs or rods. In most cases you will also want to get a washer to go against the pinched stops. Probably fits most Ford...

Buy

$0.45
Frequently
Purchased With

Item #: 26578 [More info]
[More info] PCV Grommet - Valve Cover - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Replaces Ford part #C7AZ-6892. For round hole with two notches, aluminum or steel valve covers.

Buy

$4.15
Frequently
Purchased With

Item #: 26471 [More info]
[More info] Decal - Window Crank - Cover Plate - PAIR - Repro ~ 1968 - 1972 Mercury Cougar / 1968 - 1972 Ford Mustang
Replaces Ford part #C8AZ-6223362-A. Sold in pairs, four required per car, used on most Ford products. We often get calls like "How do I remove my front window cranks?" Unlike the rear cranks that are held on by an...

Buy

$1.85
Frequently
Purchased With

Item #: 15266 [More info]
[More info] Heat Riser - Choke Tube Kit - 428 CJ 4V - OE Steel - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Exact OEM standards and specifications. Correct fiberglass insulation, fittings, rubber hose and S clip.

Buy

$61.80
Frequently
Purchased With

Item #: 11813 [More info]
[More info] Carburetor Spacer Plate - Gasket - 390-4V - 428CJ Manifold - Spacer 4BBL - Repro ~ 1969 Mercury Cougar - 1969 Ford Mustang
New carburetor spacer plate gasket for all 1969 Mercury Cougar or Ford Mustang with S code 390-4V or 390IP original Autolite Carburetors. Additionally it fits all Ford installed Holley carburetors. This is the...

Buy

$3.04
Frequently
Purchased With

Item #: 26399 [More info]
[More info] Decal - Air Cleaner - 428 w/ Ram Air - Autolite Parts - Repro ~ 1969 Mercury Cougar / 1969 Ford Mustang
This is a reproduction of the original Autolite parts decal that was located on the air cleaner.Fits the following models with a 428 Ram Air engine:1969 Cougar1969 Mustang ...

Buy

$8.87

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E1C16