Bumpers & Trim

Used hood lip moulding / trim clip for the Mercury Cougar. This unique little clip is found only on the 1969 hood lip moulding and six are required to mount your aluminum hood trim. Be forewarned, there will be varying degrees of surface rust found on these used clips and will rarely look mint. These units are high dollar and are for the purest whee originality is of the utmost importance. If originality is not an issue, you can get our inexpensive reproduction clip right here and save a...

Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This unit measures about 1-7/8" long with a stud height of about 3/4". 7 clips needed per trunk lid. Note that this clip features a stud that is a little longer than what was factory. If you have a swollen lip (rust) on your deck this will be an advantage to you, if not you will have to...

Used clip for the stainless steel rear deck / trunk lid moulding / trim for the Mercury Cougar. This clip will also work on the 1967-68 aluminum rear deck / trunk lid moulding / trim. Seven of these units are required per moulding / trim and the acorn nut will have some rust on it. If originality is not a issue, you can get our reproduction clip here and save a little of that hard earned income. For more insight on this tricky trunk trim, check out our video below: ...

Reproduction rocker moulding / trim end clip for the Mercury Cougar. This clip is a steel clip with a wire like the original. These units are technically for the 1969 and 1970 Cougar, but they will also work well with the 1968 rocker moulding / trim. Four of these clips were used on all 1969 Cougars except for the Sport Special which used two. The 1970 Cougar also uses two per car. Sold individually.Will work on 71-3 with modification. ...

Ford part number C9WY-6510198-A. This is the metal rocker moulding clip that attaches the front and rear of the mouldings to the car in 1969 (except the Sport Special which only has them on the rear). In 1970 a Phillips screw held the rear end of the rocker moulding to the quarter panel on each side so just the fronts of the mouldings used these clips in 1970. Keep in mind that this same basic clip can be found on 1977-1979 Mercury Cougars and Ford Thunderbirds that were equipped with optional...

Correct plastic rocker moulding clips with Ford engineering # C9WB-6510182-A, Ford part #C9WY-6510182-A. There are five of these on each side for a total of ten per car. These same clips can be found on 1977-1979 Mercury Cougars and Thunderbirds. Most likely they were used on other FoMoCo products. If you know of other applications where these clips can be found let us know so we can post the information to help others in their search. Sold Individually.

These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This listing is for a bag of 25 clips. We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare....

These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.This particular clip is used on many Ford cars throughout the 60's and 70's.This listing is for a box of 100 clips. We recommend buying...

These retainer clips work for both the windshield and rear window stainless steel mouldings. These are often times rusty so when you are replacing your seal or trim be prepared to replace a few if not all of them. See chart below to determine how many you need for your application. Replaces Ford Part # :C5ZZ-6542413-C, C5ZZ-65423A26-B or C5ZZ-6543413-B.Sold Individually.We recommend buying the box of 100 clips to be certain you have enough clips with plenty to spare. You'll also save...

This clip mounts the actuator shaft to the eyelids. Two required for 1967 - 1968, one required for 1969 - 1970. Same clip holds the windshield wiper motor to the wiper transmission. Replaces Ford part number C4ZB-17450-C.

This clip mounts the actuator shaft to the eyelids. Two required for 1967 - 1968, one required for 1969 - 1970. Same clip holds the windshield wiper motor to the wiper transmission.

Sold as a set of twelve (two more than required), replaces Ford part #C9WY-6510182-A. From the factory there were five of these on each side for a total of ten per car. These same clips were also used on 1977-1979 Mercury Cougars and Thunderbirds. Most likely they were used on other FoMoCo products.Fits: 1969 Mercury Cougar1970 Mercury Cougar

Reproduction metal rear deck / trunk lid moulding / trim clip for the Mercury Cougar. This clip comes with a correct looking nut and works with the 1967-68 aluminum trim and the 1969-70 stainless steel trim. This unit measures about 1-7/8" long with a stud height of about 3/4". 7 clips needed per trunk lid. Note that this clip features a stud that is a little longer than what was factory. If you have a swollen lip (rust) on your deck this will be an advantage to you, if not you will have to...

Set of seven used clips with reproduction stainless steel acorn nuts. These fit the best when using an original aluminum deck lid moulding on a 1967 or 68 Cougar. In 69-70 a stainless deck trim was used and the clip was all metal with no plastic coating. For more insight on this tricky trunk trim, check out our video below: ...

This is the sub-kit you would have received when you purchased a stainless steel service replacement deck moulding for your 1967 - 1970 Mercury Cougar. The original clips used with a 1967 - 1968 aluminum deck lid moulding would have been similar but would have had a plastic shell surounding the metal clip. For more insight on this tricky trunk trim, check out our video below: ...

Nice reproduction that is "almost" spot on. Of the two versions available this one has much more definition. When you put an original next to this reproduction you will notice the original has a more raised, defined face on the Mercury Man.

This restored driver side (left hand) drip rail moulding / trim for the Mercury Cougar equipped with a vinyl top has had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. These are sold outright, as one side only, or as a pair. This is for the person that is striving for perfection with his show car. Most people are going to be satisfied with our grade "A" good used...

This restored passenger side (right hand) drip rail moulding / trim for the Mercury Cougar equipped with a vinyl top has had all minor dings and scratches removed and then polished to a mirror like finish. These puppies have been restored far beyond the quality that your car came with from the factory. These are sold outright, as one side only, or as a pair. This is for the person that is striving for perfection with his show car. Most people are going to be satisfied with our grade "A" good...

These look great and because they have the correct anodized finish they will not get dull like a part that has only been polished will.Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores.*NOTE* If you still have questions about your cores, check out the video below. ...

Due to the difficulty in obtaining trim we no longer sell these without first having you send us your cores.*NOTE* If you have questions about your cores, checkout our video below. ...

This conversion will replace the old, tired, vacuum system that likes to leak and wear out. There are few differences between the 1969 and 1970 conversion kit. This kit consists of an electric actuator assembly (new Mazda Miata motor) with a plug and play wiring loom for easy installation. Simply remove all existing vacuum components and replace with this kit to have headlight covers that work under any conditions with the car running or not. These new motors are smoother and more reliable...

Restored emblem / insert for the 69 Cougar center grille. These are sold on an exchange basis, so you must have a good core with both studs intact. The emblem will be without the decal in the center. You can get it here. Ford casting number reads C9WB-8B369-A NOTE! If you pay the core charge on our 1969 restored grille parts or complete grilles we will be under the assumption you do not have cores to send in or they are average quality with pits and cracks. If you have really clean cores you...

Restored corral for the passenger side eyelid on the 1969 Mercury Cougar. This is just the outer corral and does not include the background decal or the walking cat emblem. NOTE! If you pay the core charge on our 1969 restored grille parts or complete grilles we will be under the assumption you do not have cores to send in or they are average quality with pits and cracks. If you have really clean cores you will want to send them in advance and not pay the core charge so we can do what we call...

This is a Mustang kit and it includes 4 screws, 2 metal nuts, 2 self-threading plastic nuts and 2 anti-rattle bumpers as pictured.For Cougar, you need this kit plus 2 more plastic nuts, found here.

Fits Standard and XR7

This kit includes all hardware needed for attaching the scoops to the rocker panels on the sport special rocker mouldings. Includes all screws and studs to attach the scoops to the end of the rockers, and to attach everything to the the vehicle.

Driver quality complete assembly with average chrome, emblem and cracked lens.

Grade A original center with no obvious pitting or cracks. Keep in mind we will give up to $200 trade in for your cracked, broken or moderately pitted grille center in trade. Send us a few good pictures and we can quote what trade in value you would receive. Casting number: C9WB-8A133 This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand...

Good used 1969 grille center in average condition that will be driver quality or good for rechrome. The grille will look good with the hood closed but when you inspect the backside there may be signs of a professional repair. The chrome will looked aged and may have the beginnings of pits but nothing major. Since this is an expensive part and less than perfect we do not mind sending pictures prior to sending them out. Keep in mind we offer in store credit for broken center grilles even if they...

NOS from the factory original center grille in the original box. Keep in mind we will give up to $200 trade in for your cracked, broken or moderately pitted grille center in trade. Send us a few good pictures and we can quote what trade in value you would receive. Casting number: C9WB-8A133 Ford part number: C9WY-8200-A This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50%...

Quality reproduction of a very hard to find, one year only part. This new part is made with the latest plating process, zinc alloys and production processes which exceed the original. The exposed horizontal bars have been highly polished giving a deep chrome shine and, to add contrast, all other surfaces have been powder coated to a matte black finish. Replaces Ford part # C9WY-8200-A. The casting number as seen on the backside reads: C9WB-8A133 "Mercury Man" emblem not included. Keep in mind...

This rechromed grille has had any minor cracks / breaks repaired and has been replated. You will need to apply detail paint. If you are in question as to whether your grille can be restored, please send pictures prior to sending it to us for evaluation and we will let you know if you will receive partial or full core credit. Ford part # C9WY-8200-A. The casting number as seen on the backside reads: C9WB-8A133 Like all of our rechromed parts, if you have exceptionally clean cores and have high...

This is a seven piece rechromed grille. If you want your actual grille re-chromed as opposed to our grille (that can be shipped the same day as you order) it will take 30-40 days to be completed. We do not apply the black detail paint. The end result will be a grille that has more luster than the factory but do notice that when a part with lots of sharp ninety degree angles is polished you will never have as defined corners as original. That being said, the workmanship of our grilles is far...

1/4-20 J nut, various applications.

Used grade "A" driver side (left hand) headlight eyelid door for the Mercury Cougar as taken from a Western parts car. This unit will not have any bends, cracks, or pits on the face of the chrome. Not perfect, but the best original unit we can obtain.Casing number: C9WB-13A139

Used grade "B" driver side (left hand) headlight eyelid door for the Mercury Cougar as taken from a Western parts car. Good crack free part that will show minor pitting in between the ribs in the black area and other minor wear marks. Great for a daily driver. Casting number: C9WB-13A139

Restored driver side (left hand) headlight eyelid door for the Mercury Cougar. We take the best from a Western parts car and send them out to get restored. The black painted areas will need to be refinished. Casing number: C9WB-13A139 Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits you will get back restored parts...

Used grade "A" passenger side (right hand) headlight eyelid door for the Mercury Cougar as taken from a Western parts car. This unit will not have any bends, cracks, or pits on the face of the chrome. Not perfect, but the best original unit we can obtain. Casting number: C9WB-13A38 NOTE: Item does not include corral or emblem assembly

Used grade "B" passenger side (right hand) headlight eyelid door for the Mercury Cougar as taken from a Western parts car. Good crack free part that will show minor pitting in between the ribs in the black area and other minor wear marks. Great for a daily driver. Casting number: C9WB-13A38 NOTE: Item does not include corral or emblem assembly ...

Restored passenger side (right hand) headlight eyelid door for the Mercury Cougar. We take the best from a Western parts car and send them out to get restored. The corral is not included, and all the black areas will need to be refinished. Casting number: C9WB-13A38 Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send your cores in advance. When you do we will do what we call "core matching". If you send in parts with ZERO pits...

Our grade B, driver quality grille halves are nothing to brag about... We will assure you they will have no more than one break in the area shown. If they have two breaks then there is nothing to support the horizontal bars. We will often ship these parts with a zip tie to hold the grille together and to avoid further damage in shipping. Once bolted in place you will not easily be able to tell there is a break as the upper and lower mounting tabs will keep the grille bars rigid and together....

Restored driver side (left hand) grille half for the 1969 Mercury Cougar. We use the best we have available, taken from a Western parts car and send them out to get rechromed. These grilles come naked (all parts removed) and all the black painted areas will need to be refinished. We recommend the SEM Trim Black paint that we carry. Ford casting numbers: SAE-H-69CR and C9WB-8151 Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to send...

Our grade B, driver quality grille halves are nothing to brag about... We will assure you they will have no more than one break. If they have two breaks then there is nothing to support the horizontal bars. We will often ship these parts with a zip tie to hold the grille together and to avoid further damage in shipping. Once bolted in place you will not easily be able to tell there is a break as the upper and lower mounting tabs will keep the grille bars rigid and together. When ordering less...

Restored passenger side (right hand) grille half for the 1969 Mercury Cougar. We use the best we have available, taken from a Western parts car and send them out to get rechromed. These grilles come naked (all parts removed) and all the black painted areas will need to be refinished. We recommend the SEM Trim Black paint that we carry. Ford casting numbers: SAE-H-69CR and C9WB-8150 Like all of our rechromed parts, if you have exceptionally clean cores and have high standards you will want to...

New adhesive backed foil insert that goes behind the walking cat on the passenger side headlight eyelid door on the 1969 Mercury Cougar.  You will likely want to purchase the reproduction walking cat when replacing this foil insert. You will have to break the original studs to remove the cat to replace the foil. The reproduction walking cat comes with two flat attaching clips. We also offer a restored emblem corral (chrome surround) for the walking cat. You...

This one year only part fits inside the 1969 lower column cover and fills the gap between the column tube and plastic cover of non-tilting steering columns. It is color coded to match your column and lower dash. Please select your desired color in the comments section, and we will attempt to accommodate you as close as we can. Usually we will have your desired color in stock. Original Ford part number C9WY-3K680-A. *NOTE* - The 1969 Ford Mustang has a different part number which is...

Complete mounting kit for the vacuum storage tank located inside the front portion of your driver side fender.

Reproduction headlamp adjusting nut and screw. Slightly longer screw than stock, small amount of added length does not interfere with anything in or behind the grille. The nut is an exact copy of what is found on the 1969-70 adjustment. Almost the same as the nut found on the 1967-68 Cougar, this isn't even shown on those grilles. 1967-68 mounts on the backside of the headlight bucket. Total of 8 adjustment screws used on each 1967-70 Cougar, item sold individually.Note: When installing...