Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Engine Brackets for the 1967 - 1973 Mercury Cougar


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 145-176 of 176
$0 Price: $53.87

Buy Details

Availability: Out of Stock
Item #: 23902 -

Used alternator adjusting bracket for any 1967 Mercury Cougar or Ford Mustang with 390 engine and without smog. Also fits Shelby GT-500.Replaces Ford part number C6AE-10145-B, or it is stamped C6AE-B

$0 Price: $138.87

Buy Details

Availability: Out of Stock
Item #: 25036 -

Used Alternator Adjusting Arm / 429CJ for the 1971 Mercury Cougar / 1971 Ford Mustang 

$0 Price: $167.85

Buy Details

Availability: Out of Stock
Item #: 24332 -

Application - 1968 - 390-4V and 427-4V, and all 1968 - 1970 428 Cobra Jet engines. This is also referred to as the low mount alternator adjusting bracket. It has the Ford stamped casting number of C8AE-10145-B. Ford part number is C8AZ-10145-B.

$0 Price: $61.88

Buy Details

Availability: Out of Stock
Item #: 24582 -

C9AZ-3D600-A Power steering pump adjusting spacer for use without air conditioning. For most 1971 Mercury Cougar or Ford Mustang with 429CJ engines.

$0 Price: $42.89

Buy Details

Availability: Out of Stock
Item #: 24014 -

For any 1967 or 1968 Cougar with either a 289 or 302 engine. Virtually the same bracket as for the 1969 351W engine. Except for the obvious 1-1/4 inch hole in the middle of the bracket, they are the same. Compare the OEM used part price to the reproduction part. Ford master part number C7AZ-3C511-A, same part number as the 351W bracket with the addition of the large hole. Ford intended to have a casting number stamped on these brackets and it would have been C7AA-3C511-B. For restoration...

$0 Price: $55.89

Buy Details

Availability: Out of Stock
Item #: 25284 -

For restoration purposes, this bracket was factory painted satin black. May or may not have a stamped number of D1OA-3C511-AA. *This bracket can only be used in conjunction with an all steel pump mounting bracket. 71 72 73

$0 Price: $125.85

Buy Details

Availability: Out of Stock
Item #: 25159 -

Factory stamped D0ZA-3C511-A. There are three versions of this bracket and all are functionally identical. It appears the early version had no part number in 1970, later in the 1970 model year this version appeared with the D0ZA casting number on it and then in 1971 you see the D1ZA casting number. Of the three brackets this appears to be the hardest to obtain. This bracket can only be used in conjunction with the new for 1970, all steel pump mounting bracket. 1970 Boss 302 and 351 Cleveland...

$0 Price: $139.85

Buy Details

Availability: Out of Stock
Item #: 24080 -

For any year 1967 1968 1969 1970 Mercury Cougar with an FE 390, 427, or 428CJ engine. Identified by the round dimple stamped into it. Compare the OEM used part price to the reproduction part. For restoration purposes, this bracket was factory painted satin black.

$0 Price: $114.89

Buy Details

Availability: Out of Stock
Item #: 31880 -

This complete four part kit is correct for any 1967-68 small block 289 or 302, and 351 Windsor Mercury Cougar or Ford anything 1967, 1968 and 1969. Used aluminum pump mounting bracket, front adjusting bracket with large hole, pivot stud, and nut.If you do not have a air conditioning you will need a spacer in place of the round spacer shown. If you have the 351 Windsor without A/C, you will need a the rectangular spacer which is sold separately.

$0 Price: $185.04

Buy Details

Availability: Out of Stock
Item #: 11075 -

This Big Block motor mount bolts to the driver side (left hand) of the engine block. This original plate with the "L 427" stamped into the bracket. Fits 1968 Mercury Cougar GT-E with 'W' code 427 side oiler engine. A regular FE Cougar driver side will work with modification.  Ford part # C8ZZ-6046-C for the left hand bracket

$0 Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 25439 -

Factory original part for all 1971 - 1973 Cougar *convertibles. Also correct for 1971 429CJ all body styles. Right hand bracket. Ford part number D1ZZ-6028-A.Does not come with hardware. May have a single or pair of holes on the flat surface. We see them both ways.*Excludes non-convertible models.

$0 Price: $193.86

Buy Details

Availability: Out of Stock
Item #: 25440 -

Factory original part for all 1971 - 1973 Cougar *convertibles. Also correct for 1971 429CJ all body styles. Left hand bracket. Ford part number D1ZZ-6029-A. May have a single or pair of holes on the flat surface. We see them both ways.*Excludes non-convertible models.

$0 Price: $350.00

Buy Details

Availability: Out of Stock
Item #: 25304 -

Original engine frame mount brackets for all 1971 to 1973 Cougar *convertibles regardless of engine and all 1971 Cougar 429 Cobra Jets. Includes one each: D1ZZ-6028-A & D1ZZ-6029-A engine frame brackets. Visually, there are also a version where there is a double set of holes on top. *Excludes non-convertibles with 351 cubic inch engines.

$0 Price: $42.89

Buy Details

Availability: Out of Stock
Item #: 27535 -

Factory original part for all 1973 Cougar hardtops with 351 engines. 1973 Mustang with 302 or 351 engines. Left hand bracket. Ford part number D3ZZ-6029. Does not come with hardware.*Note - rubber mounts are not available new for these 1973 engine mounts. Save your old ones!*Excludes convertible models.

$0 Price: $81.45

Buy Details

Availability: Out of Stock
Item #: 27536 -

Original 1973 hardtop small block or 351 V-8 engine frame brackets. Includes one each: D3ZZ-6028 & D3ZZ-6029 engine frame brackets. These will fit directly into your 1973 Mercury Cougar Coupe or 1973 Mustang with 302 or 351 engines. *Note - Engine isolator rubber mounts are no longer available for these 1973 mounts. We suggest switching to the 1971-72 engine mount brackets and easy to source rubber mounts.*Excludes 1973 convertible Cougar and Mustang.

$0 Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 31442 -

NOS Air conditioning belt tension pulley for Cougars and Mustangs with the 289 or 302 engine built between 1/3/1967 and 3/1/1968.  Ford part # C7AZ-8678-B. NOTE* Send in your old core for a credit toward the purchase of this NOS pulley. *NOTE* Must be used with the C7AA-2888-G cast iron lateral support brace. Check out this video

$0 Price: $215.87

Buy Details

Availability: Restored / Remanufactured
Item #: 11-9906 -

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

$0 Price: $193.85

Buy Details

Availability: Out of Stock
Item #: 11-9916 -

Air conditioning belt tensioning pulley for Ford Galaxie and other full sized Ford and Mercury cars with the 289. These are all sold with new bearings. If your pulley only needs a bearing, don't sweat it. Click here to view the repair bearing (ITEM #: 11-0413), we've got what you need! Ford part # C5AA-8A619-F or C5AZ-8678-F ...

$0 Price: $95.85

Buy Details

Availability: Out of Stock
Item #: 11-9919 -

Air conditioning belt tensioning pulley for Ford Thunderbird and other full sized 1968 and 1969 Ford, Lincoln, and Mercury cars with the 429. These are all sold with new bearings. If your pulley only needs a bearing, don't sweat it. Click here to view the repair bearing (ITEM #: 11-0413), we've got what you need! Ford part # C8VA-8A619-B ...

$0 Price: $175.86

Buy Details

Availability: Out of Stock
Item #: 11-9908 -

Used bracket and pulley assembly with new installed bearing for Cougars or Mustangs equipped with the 428CJ engine. This is also a service replacement part for the C8AZ-8678-B fixed idler pulley. The only difference between them is that this part has the larger bearing.*Note* All new bearings will have a slight bit of play in them. This is by design, by the manufactures. We have asked the suppliers, and the answer is to allow for possible heat expansion. Even the "Koyo" branded ones, which...

$0 Price: $88.88

Buy Details

Availability: Out of Stock
Item #: 24431 -

C8OZ-3C511-B Rear power steering pump support bracket. Also called the high pressure hose indexing bracket. For any 1968 - 1970 Cougar or Mustang with any of the 390 / 427 / 428CJ engines. OEM used part designed to maintain the position of the high pressure power steering hose from coming in contact with with moving or high heat parts. *Note - May or may not work with non-original or replacement high pressure hoses.

$0 Price: $90.85

Buy Details

Availability: Out of Stock
Item #: 33475 -

NOS big block motor mount. Left is the same as right, sold individually. This isolator is used with the 390, 427, 428 and 429 Cobra Jet engines.  Sold individually. Ford Part #: D1ZZ-6038-A.

$0 Price: $132.85

Buy Details

Availability: Out of Stock
Item #: 32879 -

Used engine or 'motor' mount for any 1969 Mercury Cougar or 1967-69 Ford Mustang convertible. There is not a replacement engine mount for the 1967 cars with 289 engine. These have the Ford casting number of C7ZA-6038-F, in the rubber. The mounts that we have in stock are a 30 year accumulation, needless to say it is very limited supply. They all appear to be in good shape without cracks in the rubber. We offer them for those enthusiasts that want correctness for concours judging, we suggest...

$0 Price: $105.89

Buy Details

Availability: Out of Stock
Item #: 12331 -

Used engine or 'motor' mount for any 1967 Mercury Cougar or 1967 Ford Mustang hardtop (non-convertible). There is not a replacement engine mount for the 1967 cars with 289 engine. The ones available on our site and others, technically are direct bolt in replacements for 1968-70 Mercury Cougar or Ford Mustang with small block V-8 engines and not convertible. These have the Ford casting number of C7ZA-6038-E, in the rubber. The mounts that we have in stock are a 25 year accumulation, needless to...

$0 Price: $89.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15158 -

Cast iron pedestal mount for the air conditioning compressor on all 1970 Mercury Cougars and Ford Mustangs with the 351W H code 2V engine. Ford also used this bracket on other 1970-71 Ford passenger cars with 351W engines only.Ford casting number D0AA-2882-E.

$0 Price: $39.87

Buy Details

Availability: Out of Stock
Item #: 24394 -

Used alternator bracket for any 1968-69 Mercury Cougar or Ford Mustang with 289 / 302 / 351W engine, but without factory smog pump.Replaces Ford part number C8OE-10156-A.*Trivia - the only difference between this bracket, and the C6OE-10156-A bracket is the thickness of the steel. Either one will work on 289/302/351W engines 1966-69.

$0 Price: $54.86

Buy Details

Availability: Out of Stock
Item #: 23863 -

C5TE-10156-A Alternator mounting bracket for most 1967 Mercury Cougar and Ford Mustang with 390 engine. Ford master part number C5TZ-10156-A. *Note - Excludes cars with California DSO's with smog pump.

$0 Price: $185.85

Buy Details

Availability: Out of Stock
Item #: 25203 -

Special rear mounting bracket for 1970 Boss 302 Cougar Eliminators and Ford Mustang. Triangular shaped bracket as shown. Ford part number D0ZE-10A336-A.

$0 Price: $32.85

Buy Details

Availability: Out of Stock
Item #: 24466 -

Aluminum spacer for the alternator mounting bracket on 1971 Mercury Cougar and Ford Mustang with 429 Cobra Jet engines. Also fits 1970-71 Cyclone and Torino with 429CJ engines. Spacer measures approximately 2-7/8 inches long. Fits between the engine and alternator mounting bracket.

$0 Price: $22.86

Buy Details

Availability: Out of Stock
Item #: 24081 -

C7SZ-3D600-A  Power steering pump adjusting spacer for use without air conditioning. For most 1967 - 1969 Mercury Cougar or Ford Mustang with 289, 302, 390, 428CJ engines, excludes 1969 351W and 1969 Boss 302 engines. Spacer dimensions: 7/16" I.D. x 1" O.D. and 1/2" thick. Same thickness as the pedestal bracket for air conditioning.

$0 Price: $10.89

Buy Details

Availability: Out of Stock
Item #: 20557 -

Stud that the factory line workers used for locating the air conditioning pedestal bracket. Then backed up with a nut. Used on 289 / 302 / 351W / 390 / 428CJ pedestals from 1967 - 1973. We sell this item as reproduction, see related items.*Note - Excludes 351C and 429CJ.

$0 Price: $70.88

Buy Details

Availability: Out of Stock
Item #: 25015 -

D0AZ-3C511-F Steel bracket that mounts to the engine block for adjusting the power steering pump. For any 1971 Cougar and Mustang with 429CJ engines with or without air conditioning. Additionally this bracket fits 1970 - 1971 Torino / Cyclone / Ranchero with 429CJ engines. *Note - Must be used in conjunction with the D0AZ-3A732-A pump bracket.

  • Next >