Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 193-240 of 586
$0 Price: $545.85

Buy Details

Availability: Restored / Remanufactured
Item #: 33168 -

Remanufactured OEM Ford Boss 429 and 429 Cobra Jet manual transmission flywheel. Stamped C9AE-C. New ring gear, resurfaced clutch surface. No visible issues, no discoloration from heat. 1971 Mercury Cougar and Ford Mustang, 1970-71 Ford Torino and Mercury Cyclone and variants. 1969-70 Boss 429. Ford part number C9AE-6375-C.

$0 Price: $252.83

Buy Details

Availability: In-Stock Item
Item #: 11343 -

New manufactured flywheel for manual transmissions. Fits all 1967-68 Mercury Cougar and Ford Mustang with 289 engines with 3 or 4 speed manual transmissions. This flywheel has a 157 tooth ring gear. This flywheel will fit many other Ford small block V-8's with the 157 tooth gear.*Note - Most 1968 and newer Cougars came with 164 tooth flywheels, and they are not compatible.

$0 Price: $27.35

Buy Details

Availability: In-Stock Item
Item #: 10058 -

This is a much cheaper version of the foil sound deadeners and underlays we sell. This particular insulation is basically bubble wrap with two layers of foil on both sides. Good for insulating headliners, floor pans, trunk areas, door panels, kick panels and just about anything else you might want to use it for. This insulation comes in a 48" X 72" roll. Just grab a pair of scissors and cut your shapes. You can use any adhesive you like (contact cement or weatherstrip adhesive,...

$0 Price: $659.88

Buy Details

Availability: In-Stock Item
Item #: 31038 -

Set of four in the box, no blemishes.Ford part number C8OZ-1130-COther Applications: Torino Fairlane Ranchero

$0 Price: $170.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1241 -

This is the very best we can offer. No cracks in the plastic holster, good color and no fraying on the webbing. NOTE: Front retractors are not side specific for all years 67-73, and are good for Cougar AND Mustang applications.Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out our video "All about seat belts" below. ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1242 -

This is a fully functional grade "B" retractor that will have a small crack in the plastic "holster" and may show very slight pitting on chrome. Driver quality, ready to plug and play. NOTE: Front retractors are same for left and right, and are good for all 67-73 Cougar AND Mustang applications. Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged.  Check out our video "All about seat belts" below. ...

$0 Price: $170.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1238 -

This is the very best we can offer. No cracks in the plastic holster, good color and no fraying on the webbing. NOTE: Front retractors are not side specific for all years 67-73, and are good for Cougar AND Mustang applications.Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out our video "All about seat belts" below. ...

$0 Price: $65.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 14-1239 -

This is a fully functional grade "B" retractor that will have a small crack in the plastic "holster" and may show very slight pitting on chrome. Driver quality, ready to plug and play. NOTE: Front retractors are same for left and right, and are good for all 67-73 Cougar AND Mustang applications. Also, the difference between the standard and deluxe versions are the end of the buckle, the standard is rounded and the deluxe is ridged. Check out this video ...

$0 Price: $75.02

Buy Details

Availability: Out of Stock
Item #: 13693 -

Used factory installed vented fuel, or gas cap as installed on 1967-69 Mercury Cougar 1970 cars without California emissions. Also fits 1969-70 Shelby Mustang. In 1970 California required a non-vented fuel cap.We stock these in limited quantities, and will have an intact paper gasket. Correct "VENTED" embossed and has the "S" stamped onto the center rivet. Price is established by demand, and these normally are only needed for very high level restorations or strict concours judging...

$0 Price: $30.69

Buy Details

Availability: In-Stock Item
Item #: 33629 -

This filter fits all V8 Mercury Cougars or Ford Mustangs with the Autolite Carburetor. This filter fits all 1967 - 1973 Cougars except for the following: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many 6 cyl Mustang applications. These Filters are precisely designed and engineered to meet OEM requirements and fitment. Delivering high efficiency filtration, our filters meet modern engine demands for maximum fuel flow. Prevents harmful contaminants such as dirt,...

$0 Price: $8.15

Buy Details

Availability: In-Stock Item
Item #: 11802 -

This filter fits all V8 Mercury Cougars or Ford Mustangs with the Autolite Carburetor. This filter fits all 1967 - 1973 Cougars except for the following: the Boss 302 4V, 390 4V, 427 4V, 428 4V and the 429 4V. Will also fit many 6 cyl Mustang applications. These Filters are precisely designed and engineered to meet OEM requirements and fitment. Delivering high efficiency filtration, our filters meet modern engine demands for maximum fuel flow. Prevents harmful contaminants such as dirt,...

$0 Price: $25.67

Buy Details

Availability: In-Stock Item
Item #: 14008 -

This is the steel tube that goes from the carburetor to the fuel pump. Designed for vehicles LO-VOL fuel pump, fits 67 - 70 Mustang, 67 Cougar 390, 67 Fairlane and Torino.

$0 Price: $260.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24444 -

NOS low fuel sending unit for 1968 mid size Ford and Mercury excluding station wagon and Ranchero. Three prong plug for the low fuel wiring plug. We aren't sure if that 42 year old thermistor has a shelf life or not. Stamped C8OF-9275-A as shown. Ford MPC lists it for 1968, maybe 1969? we aren't entirely sure.Check out the video below on our new gauge tester: ...

$0 Price: $1.85

Buy Details

Availability: In-Stock Item
Item #: 15716 -

Individual reproduction anti-rattle rubber gasket for the stainless steel accent ring used on the Mercury Cougar or Cyclone. This unit is used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Sold individually.

$0 Price: $30.85

Buy Details

Availability: In-Stock Item
Item #: 26999 -

Set of 20 reproduction anti-rattle rubber gaskets for the stainless steel accent rings used on the styled steel wheels found on the Mercury Cougar or Cyclone. These units are used to keep the accent rings from rattling and driving Cougar and Cyclone owners insane. You can run your wheels without these rings, however Ford used them, so we sell'em. Set of 20

$0 Price: $2.65

Buy Details

Availability: In-Stock Item
Item #: 10619 -

Ford FE distributor shaft to engine block gasket, made of rubber. Fits all FE or 352, 360, 390, 410, 427, 428 engines. 1958-76. This is a tapered rubber washer. Will not fit small block Windsor or Cleveland engines. Ford part number B8A-12143-A.

$0 Price: $32.00

Buy Details

Availability: In-Stock Item
Item #: 15381 -

Rubber coated fiber oil pan gasket for the 351 Cleveland engine in the 1970, 1971, 1972 and 1973 Mercury Cougar or Ford Mustang.

$0 Price: $16.75

Buy Details

Availability: In-Stock Item
Item #: 15377 -

OEM style cork oil pan gasket for the 429 Cobra Jet on the 1971 Mercury Cougar or Ford Mustang.

MSRP:$14.99
$14.99 Price: $11.15

Buy Details

Availability: In-Stock Item
Item #: 12255 -

Premium quality, exact fit plastic gasket set for both the driver and passenger side door handles. Also fits 66-71 Ford Fairlane and 70-71 Cyclone / Torino as well as several other Mercury, Ford Lincoln models. We are the exclusive retailers in the U.S. for this quality kit.

$0 Price: $24.27

Buy Details

Availability: Out of Stock
Item #: 10128 -

New gaskets for installing your intake manifold. This is the Felpro branded gasket. Fits 1964-73 small block Ford engines with size 260/289/302 cubic inches. C code 289-2V, A code 289-4V, F code 302-2V, and J code 302-4V.*Note - Excludes 1969-70 Boss 302 engines.

$0 Price: $47.35

Buy Details

Availability: In-Stock Item
Item #: 32380 -

New gaskets for installing your 429 Cobra Jet intake manifold. This is the Felpro branded gasket. Fits 1970-71 Ford 429CJ engines. 1971 Mercury Cougar and Ford Mustang with J or C code 429CJ engines. Intake to cylinder head gaskets and intake end pieces, along with O ring for distributor. *Note - Excludes N code 429-4V or Thunderjet, passenger car engines.

$0 Price: $37.85

Buy Details

Availability: In-Stock Item
Item #: 31802 -

NEW PRODUCT! This gauge tester can be used to test all gauges on any Ford vehicle from 1956 to 1983. We are privileged to be one of the first companies able to offer this new product that has long been needed by the classic car community. Now you can quickly determine if the gauges in your car are accurate with this gauge tester. You can verify the high medium and low reading for your gauges, and also shows that the Instrument Voltage Regulator is working. If you own a...

$0 Price: $24.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15-0149 -

Gear Selector Plate for the T-Bird steering column shift machanism. 

$0 Price: $14.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24589 -

Used chrome end for the grab handle found on Mercury Cougar XR7 and several other Lincolns like the Continental MK III. Seldom will these be perfect, most have some pitting on the top sides. Fortunately they can be switched end for end and the pitting side can be installed downward. These units are sold individually.Mercury part # C9MB-5422668-A or D0MB-5422668-A.

$19.85 Price: $19.89

Buy Details

Availability: Out of Stock
Item #: 24386 -

Unlike the parts pictured, we only have pitted covers left. At present we have no grade "A" examples. C8MB-5422678-A. Brushed die-cast (with stainless steel look) cover for the chromed grab handle end part number C9MB-5422668-A. These are the smooth or plain ends, the Lincolns used a cover that had scrolling. Used on 1969-70 Mercury Cougar XR7 and various other Lincolns and Mercury full sized cars. These clean up pretty well with steel wool as shown. Keep in mind we have reduced priced...

$0 Price: $359.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 18991 -

These 1969 molded vinyl, single post head rests were never offered on a Cougar or Mustang to our knowledge but they make a great "go-around" for the very expensive 1968 dual post headrests. To use them on your 1968 Cougar you will first need a pair of 1969 bucket seats as they have the internal hardware to accept the post. 1968 was a weak design so the 1969 seat frame is a nice upgrade and of course will accept any of the 1968 foam and interior kits. These headrests when in the down position...

$0 Price: $90.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41396 -

Nice thick foam. Chromed mounting post. Includes base plate for seat. Keep in mind we have good used for less money, several colors available in good condition. Find them here.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 12042 -

Used random brand 4001 high beam headlight for the Mercury Cougar. High beam headlights are distinguished by the number 1 at 12 o'clock position and the 2 prong connection on the back. We guarantee these units to work. Basic Ford part # 13007-B.

$0 Price: $6.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25864 -

Used random 4000 or 4002 brand low beam headlight for the Mercury Cougar. Low beam headlights are distinguished by the number 2 at 12 o'clock and the 3 prong connection on the back. We guarantee these units to work. Replaces basic Ford part # 13007-B.

Headlight Door Actuator - Reman ~ 1970 - 1971 Ford Torino / Mercury Cyclone
1970 - 1971 Ford Torino,1970 - 1971 Mercury Cyclone,1970 - 1971 Ford Ranchero
0
$0 Price: $202.50

Buy Details

Availability: In-Stock Item
Item #: 25027 -

D0OB-13A167-A - NOT FOR COUGAR / GALAXIE. This actuator was removed from a Southern California car years ago and was immaculate inside and had no pitting on the shaft. Starting with a clean core is paramount, if it sounds like a tambourine when you start the process your results will not be very good. The inner shaft seal as well as the dust bellows was replaced using the West Coast Classic Cougar kit. It holds vacuum well on the bottom nipple, but the top (like most) will leak down in...

$0 Price: $552.35

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31155 -

Complete set of halogen projection headlight bulbs for your 67 - 73 Cougar or 1969 Mustang. Integrating the newest modern projection headlight technology into a slim compact bulb, these headlights will fit right into your existing headlight bucket. Each kit comes with the proper wiring adapters so all you need to do is plug one end into the bulb and the other end into your headlight harness.NOTE: From the factory, Ford made the alignment tabs different passenger vs driver side...

$0 Price: $96.25

Buy Details

Availability: In-Stock Item
Item #: 14062 -

A modern touch to this classic muscle car look. This kit is the same Scott Drake "Shelby Style" Billet hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, machined billet aluminum top plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are Machined billet aluminum top plates and the deluxe is stainless steel. Common...

$0 Price: $63.35

Buy Details

Availability: In-Stock Item
Item #: 13779 -

This kit is the same Scott Drake "Shelby Style" DELUXE hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between the standard version and this deluxe version, is that the standard is chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the...

$22.95 Price: $33.17

Buy Details

Availability: In-Stock Item
Item #: 42020 -

This kit is the same Scott Drake "Shelby Style" hood pin kit offered by many other vendors.Kit includes 2 Hood Pins, 2 dowel pins, 4 Nuts to hold the dowel pins on, plates for the top of the hood, 8 screws to hold the hood plates on and 2 tie down cables. The difference between this version and the deluxe version, is that these are chrome plated and the deluxe is stainless steel. Common consensus is that the holes for the pins were hand drilled at the factory, so the exact location varied from...

MSRP:$149.85
$149.85 Price: $127.35

Buy Details

Availability: In-Stock Item
Item #: 10319 -

If you have already begun to install or have installed this item, it is not eligible for return or refund. This rim blow horn switch is made in the United States by Daniel Carpenter Mustang and is made from vinyl like original. When installing, make sure to massage the rim blow switch in place with counter clockwise, compacting strokes. Clockwise strokes (thumb motions) will stretch the switch and when you complete the installation you will find the part has become too long to fit in place...

$0 Price: $34.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 13689 -

Used B grade dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. Used item as would have been found on 1969 Eliminators as well as other models with the plain poverty or dog dish center cap, about 7-1/2 inches in diameter. Replaces Ford part # C8OZ-1130-G, or C8MY-1130-A. Fits: 1969 Mercury Cougar Eliminator / Cyclone 1970 Mercury Cougar Eliminator / Cyclone 1971 Mercury Cougar / Cyclone 1972 Mercury Cougar 1973 Mercury Cougar 1969 Ford...

$0 Price: $46.25

Buy Details

Availability: In-Stock Item
Item #: 30526 -

Reproduction dog dish style hubcaps / wheel covers for the Mercury Cougar as well as other Mercury and Ford products. There are no less than three versions of this reproduction unit on the market. This one, in my opinion, is the best option. The hue is not as brilliant as the original, but a very nice cap for the fit and finish that it offers. We have trim rings available too! Check out our video on Legendary Wheels below: NOTE: These are for use on the Legendary Series Eliminator wheels Fits:...

$195.00 Price: $249.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24384 -

Dog dish style hubcap / wheel cover with the Mercury Man center cap for the Mercury Montego. This very rare optional unit was used in conjunction with the 14x6" 16 hole GT wheel commonly found on Mustangs and Torinos in 1968. This hubcap / wheel cover was offered only in 1968 and rarely seen on a Cougar as it would have only been offered as an over the counter option at your Mercury dealership. The more common application for this unit would be the 1968 Mercury Montego or Cyclone. No pitting,...

$0 Price: $110.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 30264 -

Used grade "A" turbine style hubcap / wheel cover for the Mercury Cougar and Montego. Will have no obvious curb rash, the center will still show some red but usually will be faded and the paint will show some aging. These are the same as the 1969 Sports Special / 1968 Dan Gurney hubcap / wheel cover, but have the Mercury logo glued in the center. Ford part # C8GY-1130-G.Fits:1968 Mercury Montego

$0 Price: $50.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24385 -

Used grade B turbine style hubcap / wheel cover for the Mercury Cougar and Montego. Will have some curb rash, faded center, minor dings and paint deterioration. These are the same as the 1969 Sports Special / 1968 Dan Gurney hubcap / wheel cover, but have the Mercury logo glued in the center. Ford part # C8GY-1130-G.Fits:1968 Mercury Montego

$0 Price: $94.86

Buy Details

Availability: Out of Stock
Item #: 31641 -

The POGO Stick works just like the larger Hustler stick but is much easier to ship. If you need more leverage you can just add a pipe for leverage. We will loan this hustler stick for 60 days, with a 100% refundable purchase price. Tool must be returned in undamaged condition with no missing parts within the 60 day time period. Returns past 60 days are subject to a 25% restocking fee. Check out this video ...

$0 Price: $110.00

Buy Details

Availability: In-Stock Item
Item #: 11-9920 -

Air conditioning belt tension pulley for 1964-66 Ford or Mercury cars with 352, 390, 410, or 428 cubic inch engines. Two versions of this pulley were made by Ford, the difference is the pulley itself. Some pulleys, like the one in the picture, show a solid, one piece steel pulley. *Note, this pulley has a taller base on the bracket than the C7AA version. Pulley alignment will not work on 1967 bracketry. We can also rebuild your pulley, see item 27607. Ford part # C4AA-8A619-A. ...

$0 Price: $135.00

Buy Details

Availability: Restored / Remanufactured
Item #: 11-9918 -

Air conditioning fixed idler pulley for Ford or Mercury with the 289 engines. 1965, 1966, early 1967 Ford and Mercury full and midsized cars all with 289 engines and factory air conditioning. These are all sold with new bearings. If your pulley only needs a bearing? Click this BEARING link, we've got what you need! Ford part # C5AZ-8678-D. ...

$0 Price: $135.00

Buy Details

Availability: Restored / Remanufactured
Item #: 11-9915 -

Air conditioning fixed idler pulley for Ford or Mercury with the 352 / 390 / 410 / 428 engines. These are all sold with new bearings. If your pulley only needs a bearing? Click this BEARING link, we've got what you need! Ford part # C5AA-8A919-C and C5AZ-8678-C ...

Idler Pulley - Fixed - w/ New Bearing - 429CJ - Restored ~ 1971 Mercury Cougar / 1971 Ford Mustang
1970 - 1971 Torino with the 429CJ engine, 1970 - 1971 Ranchero with the 429CJ engine, 1970 - 1971 Cyclone with the 429CJ engine, Many other 429 & 460 engines
84
$0 Price: $115.85

Buy Details

Availability: In-Stock Item
Item #: 11-9917 -

Used bracket and pulley assembly with new installed bearing for Mercury and Ford equipped with the 429CJ, 429, and 460 engine. This assembly was also equipped on the 1970 - 1971 Torino, Ranchero, and Cyclone with the 429CJ engine. Also many other 429 / 460 engines. Listed in the Ford Master Parts Catalog (MPC) as D0AZ-8678-B. *Note* All new bearings will have a slight bit of play in them. This is by design, by the manufactures. We have asked the suppliers, and the answer is to allow for...

$0 Price: $95.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33664 -

Used compressed gas cylinder for a 1967-1973 Mercury Cougar or Ford Mustang. Later design canister is about 2-7/8" inches in diameter, slightly larger than the OEM 1968-70 version. These will be mostly empty and for display only. OEM cylinders are approximately 2-13/16" thick. These cylinders are very close to propane or Map gas cylinders in construction. Paint one red, and slap a cardboard sleeve with a reproduction decal and close the trunk lid. Dust cap may or may not be included,...

$0 Price: Free Download

Buy Details

Availability: Download
Item #: 90021 -

Another great free download for you, our customer! In this free download, John Brower guides you through the installation of an overlay on your dashboard on your Mercury. Simply add this item to your cart and you will receive the download link via email after you complete the order.

$0 Price: $1.65

Buy Details

Availability: In-Stock Item
Item #: 15-0115 -

New foam insulation for the lower tube of the steering columns. Can be used on fixed and tilt columns, from 1968-73, on all Mercury Cougars, Ford Mustangs, and most all other Ford steering columns with a lower tube with inside diameter of 1-5/8 inches. The originals have almost always disintegrated. Adhesive probably isn't needed, but we recommend just a little drop of something to hold it in place. This is a dense foam insulation ring. DIY guys, this material can be found in bulk at home...