Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .

There are two or three manufacturers on many of the products in this section but many are only available from one source. We ALWAYS look for the BEST supplier, NOT the best price. Very few of these products are as good as what Ford supplied. Many people unknowingly discard every piece of rubber on a car when they tear it down for restoration thinking that new is better than old. In most cases this is correct thinking given the age of the parts being removed but not in all cases. Carefully inspect each of your OEM rubber parts before you decide to replace them with new. Many of the items here were available from FORD through the nineties and may have already been replaced on your car. Whereas we would like nothing better than for every customer to purchase every item in this section, our foremost goal is preservation of these classic cats.

Please click onto the individual items to obtain price and other details. You can click the image up to three times for a larger view. Need help? Call 503-463-1130


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-272 of 272
Price: $246.87

Buy Details

Availability: Out of Stock
Item #: 30994 -

This money saving kit gives you all four rubber bumper fillers that wedge into the 67-8 front and rear bumpers horizontally (the triangular ones) as well as the vertical ones that fasten to the leading edge of the fenders and quarters. Keep in mind when you remove the old rubber parts that we can give in-store credit for reusable parts. Please only send us parts that are not ripped, gouged or warped.

Price: $21.87

Buy Details

Availability: Out of Stock
Item #: 11754 -

This is the correct, original gasket for your 1971-73 Mercury Cougar antenna. Not only is it much thicker than the Ford Mustang gasket, but it also has a different overall geometry to it. Gasket mounts under the antenna base, The Mustang gasket will work, but your antenna will always be slightly askew. Unfortunately the high quality reproduction antenna we offer is only available from the manufacturer with a reproduction Ford Mustang gasket. Please remember not to discard your original Cougar...

Price: $11.88

Buy Details

Availability: Out of Stock
Item #: 31987 -

Used firewall grommet for the under dash harness. This grommet is actually part of the actual wiring harness, but every once in a while we have bad harnesses that we "part out" for pigtails or items such as this.    

Price: $20.05

Buy Details

Availability: Out of Stock, On Order
Item #: 13627 -

Reproduction gas tank to filler pipe hose fits the 67 to 70 Mercury Cougar, measures 4 1/2" long. Excludes 1970 with California emissions. Even if yours is not cracked it will be hard if it is over two decades old. We highly suggest you replace this part if yours is in fact hardened with age because a minor rear end collision could cause it to fail and send fuel spilling into your trunk area. Replaces Ford part #: C8ZA-9047-A.

Price: $5.55

Buy Details

Availability: Out of Stock, On Order
Item #: 14172 -

This is identical to the 67 pad just slightly wider. 1968 was the introduction of many Federally mandated safety upgrades, the larger pedal being one of them. Replaces Ford part number D3ZZ-2454-A

Price: $22.75

Buy Details

Availability: Out of Stock, On Order
Item #: 26236 -

This kit includes 38 pieces that include quarter panel drain valves.

Price: $58.37

Buy Details

Availability: Out of Stock
Item #: 11064 -

Original used plastic upper radiator seal for 1971-73 Mercury Cougar and Ford Mustang with 26 inch radiators. Also called a radiator air deflector. Also fits 1970-71 Torino, Ranchero, Cyclone and Montego. As well as 1970-72 full sized Ford and Mercury cars. Comes with 4 original spring clips for mounting. Clips are not sold separately. Plastic portion is about 24 inches long.  Replaces Ford part number D0OB-8B170-B.

Price: $25.00

Buy Details

Availability: Out of Stock
Item #: 26227 -

Good fit, includes all hardware shown. We've found that when using our reproduction drop down bracket (for those with headers), the bushings in this kit will rip and tear through the oversized hole, so you can also purchase the pair of the premium polyurethane bushings and the issue will go away. Otherwise you can go with our premium version boot kit of you need internal parts for the cylinder. Replaces Ford Part #: C6OZ-3C651-A ...

MSRP:$9.99
Price: $6.17

Buy Details

Availability: Out of Stock, Discontinued
Item #: 11997 -

As of now, we no longer have a supplier for this part. It has been discontinued.You can find our alternative replacement bumpers here. Finally a solution to the sagging headlights on your 1967 - 1967 Mercury Cougar! If your headlight doors sag and no adjustment is left on the adjuster bolts then you will need to replace these as your old ones have broken down or have fallen off. Please take the time to view the pictures and read the text below to see why these are so much better than what has...

Price: $25.85

Buy Details

Availability: Out of Stock, On Order
Item #: 11393 -

Reproduction door to window seal for the early 1967 Mercury Cougar and Ford Mustang. These are copies of ones for use before 12/14/1966. Install at the rear of the door at the edge of the door window. Replaces Ford part #: C7ZZ-6520558-B and C7ZZ-6520559-A. Sold as a pair. This part is often listed incorrectly under C7ZZ-6520588.

Price: $4.55

Buy Details

Availability: Out of Stock, On Order
Item #: 26572 -

Reproduction Clutch Pedal Rod To Firewall Seal. Replaces Ford Part #: C6OZ-7533.*NOTE* From personal experience we have found these do not stay attached to the firewall as well as the originals. An adhesive will remedy this problem.

Price: $55.04

Buy Details

Availability: Out of Stock
Item #: 13074 -

NOS lower inside door seal for any 1967-68 Mercury Cougar or Ford Mustang. No wrapper, this is not a reproduced item. Not very many Cougars or Mustangs came with this seal, we think it may have been for wind noise? Unknown. These are pre-drilled for mounting, no hardware included.Replaces Ford part number C7WY-6520272-A.

Price: $15.17

Buy Details

Availability: Out of Stock, Discontinued
Item #: 26479 -

Driver side only. Less than perfect fit, no returns on this item. Replaces Ford Part # C7ZZ-6521449-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: ...

Price: $40.95

Buy Details

Availability: Out of Stock, On Order
Item #: 26590 -

Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces Ford Part # : C7ZZ-6521449-OCheck out our video below for helpful tips on disassembling your vent and quarter windows: ...

Price: $79.88

Buy Details

Availability: Out of Stock
Item #: 31729 -

It is not often we get perfect used but nothing fits like OEM!The Engineering number on the bottom of the passenger side reads C7ZB-6521448-ACheck out our video below for helpful tips on disassembling your vent and quarter windows: ...

Price: $40.95

Buy Details

Availability: Out of Stock, On Order
Item #: 26599 -

Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces Ford Part # : C7ZZ-6521448-OCheck out our video below for helpful tips on disassembling your vent and quarter windows: ...

Price: $69.25

Buy Details

Availability: Out of Stock
Item #: 23422 -

Excellent reproduction seals for your 67 - 68 Cougar or Mustang vent windows. Made from Ford's Original Tooling. Much better fit than other reproductions. Replaces For part numbers: C7ZZ-6521449-A C7ZZ-6521448-A

Price: $19.85

Buy Details

Availability: Out of Stock, On Order
Item #: 26616 -

These are a higher quality rubber than the other reproduction available. Mounts to the door jamb and keeps water from going into the quarter panel. Sold as a pair. Replaces Ford part #: C7ZZ-6528182 and C7ZZ-6528183

Price: $8.45

Buy Details

Availability: Out of Stock, On Order
Item #: 26632 -

Reproduction door to window seal for all 1967-68 Mercury Cougar and Ford Mustang. Technically though, these are copies of ones for use after 12/14/1966. Install at the rear of the door at the edge of the door window. Replaces Ford part #: C7ZZ-6520558-B and C7ZZ-6520559-B. Sold as a pair. This part is often listed incorrectly under C7ZZ-6520588.

Price: $12.75

Buy Details

Availability: Out of Stock
Item #: 26523 -

New and improved reproduction bottom of the door seal for the 1967 - 1970 Mercury Cougar or Ford Mustang. Unlike previous versions, these are now made with denser material and are much more rigid. They measure 38" for 1967 -1968 and 41" for 1969-70 so you will have to trim them down if you have a 1967-68. One of the most common missing parts on a 1967-70 Mustang or Cougar today is the lower weatherstrip seals on the doors. These seals were added to cars to keep dirt and moisture from entering...

Price: $10.55

Buy Details

Availability: Out of Stock, On Order
Item #: 25972 -

Complete foam seal kit for the heater box, flappers, evaporator and heater core on a '67-'68 Cougar or Mustang with factory Air Conditioning. This kit is almost always needed when replacing your heater core.Replaces Ford part #: C7ZZ-18500-A. Check out our video below on how to replace a heater core on a '68 Cougar with A/C! This seal kit is an integral part of the process. ...

Price: $34.55

Buy Details

Availability: Out of Stock
Item #: 41542 -

Metal core base as original, correct texture. If you have a 1970 with a Hurst four speed then the one with the rectangular hole is correct for the Hurst shifter. Replaces Ford part # C9ZZ-7277-A. Check out our video on rebuilding your shifter below: ...

Price: $4.25

Buy Details

Availability: Out of Stock, On Order
Item #: 26651 -

Sold as a pair. These gaskets seal the lens to the light housing on the 1968 side marker lights found on the fenders of the 1968 Cougar.

Price: $55.89

Buy Details

Availability: Out of Stock
Item #: 25815 -

NOS weatherstrip for the driver side (left hand) quarter window in the Mercury Cougar or Ford Mustang. Ford part # C9ZZ-65214A15-A. Do you have questions about Glue-In vs Bolt-In glass? How about how to properly install Glue-In glass in your 1969 Cougar or Mustang? Check out our video below for some great glassy information! ...

MSRP:$1,085.00
Price: $849.87

Buy Details

Availability: Out of Stock
Item #: 19414 -

Includes all five pieces. Front bow rubber seal is C9ZZ-7653986-A. Side rubber seals are C9ZZ-7651564-A, C9ZZ-7651565-A. Much better fit than reproduction, perfect for that high end restoration.

Price: $42.75

Buy Details

Availability: Out of Stock, On Order
Item #: 26219 -

Excellent fit whether you are installing OEM thickness glass or repro which often is a slightly thinner gauge, must have when replacing either headliner or windshield. There have been multiple manufacturers of this seal over the years, this is the best fit in our opinion. Fits years 67 - 68 for Cougar and 65-68 on the Mustang. We also sell the bedding compound for the installation.  Replaces Ford part # C6ZZ-6503110-A. Keep in mind this is not a difficult do-it-yourself project, here's...

Price: $40.37

Buy Details

Availability: Out of Stock, On Order
Item #: 11193 -

These vertical seals attach to the leading edge of the rear quarter windows and seal against the rear edge of the door glass. Sold as a pair. Replaces Ford Part #: C5ZZ-6530146 and C5ZZ-6530147. These are the premium or concours versions. We also sell economy versions.

Price: $325.89

Buy Details

Availability: Out of Stock
Item #: 12844 -

Much better fit than the reproductions which make closing your door very difficult for the first year.Ford part # C9ZZ-7602627-A

Price: $199.89

Buy Details

Availability: Out of Stock
Item #: 12845 -

Much better fit than our reproductions which make closing your door very difficult for the first year. Ford part # C9ZZ-7602626-A

  • Next >