Hoses / Lines

Copper crush washer for all disc brake hoses and calipers 1968-73 Mercury Cougar and Ford cars like Mustang. Size 0.39" x 0.62" x 0.062". Four needed per car, two per side (one on each side of the disc brake hose end) sold indiividually.

STOPFLEX?? incorporates a special 4 layer design for superior strength and virtually no volumetric expansion. It starts with a Teflon PTFE core (liner) which is wrapped first in a Kevlar braid, followed by an elastomer barrier and then it's strengthened further by the outer stainless steel braid. Replacing original equipment rubber hoses with STOPFLEX?? stainless steel braided hoses will increase braking performance by doing away with the soft spongy brake pedal. Rubber hoses expand, with the...

This reproduction OE steel front to rear axles disc brake line is for Mercury Cougars produced before Feb. 1967.Early production brake lines were routed 'over' the steering column. 

Reproduction front to rear axle stainless steel brake line kit for Mercury Cougars produced before Feb. 1967.Early production brake lines were routed 'over' the steering column.

 2 piece fuel line. Kit is for fuel and brake lines under the car. Comes as shown. Quality AMK kit. Fits 1967 Mercury Cougar and Ford Mustang. F-3962

Reproduction brake and fuel line clamp kit for Mercury Cougar and Ford Mustang.

This quality kit contains everything you need to replace the original hardware for fuel and brake lines on your 1968 Cougar or V8 Mustang. It even includes 3 new bolts for the metal protector plate for the fuel line near the left rear wheel. Most of the mounting locations can be seen below: Click on images to enlarge. ...

Early production brake lines were routed 'over' the steering column.

For power or manual drum brake Cougars. Late production brake lines were routed under the steering column.

For power or manual drum brake Cougars.Late production brake lines were routed under the steering column.

72 - 73 Mercury Cougar and Ford Mustang Front Drum Intermediate Brake Line made of OE-style steel. Intermediate Brake Lines are the lines running from the front of the car to the back feeding your rear brakes. These lines will run along your chassis all the way back to the rear brake drop hose. All lines come Pre-Bent and flared with the correct threaded fittings which reduces your install time tremendously. These mild steel lines are Galphan coated for added protection. ...

For power or manual drum brake Cougars.Early production brake lines were routed 'over' the steering column.

Early production brake lines were routed 'over' the steering column.

Reproduction brake line clamp kit for the Mercury Cougar or Ford Mustang.

Brake line rubber grommets for any 1967-73 Mercury Cougar or Ford Mustang. These are the ones that go through the shock towers for the front brake lines. Drum or disc, all the same. Sold as a PAIR. Ford number 373624-S.

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/68

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/69

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 10/22/69

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 11/12/70

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or Mustang Date code: 12/10/70

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 12/15/69

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 10/22/68

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 2/12/70

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 2/12/71

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 2/18/69

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 5/19/70

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 5/2/69

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 5/2/69

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 6/18/68

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 6/29/70

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 6/9/69

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 6/6/69

Reproduction hose and clamp kit for the brake booster on the 1970 Cougar or MustangDate code 8/18/69

Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 8/19/68

Reproduction date coded hose and clamp kit for the brake booster on the 1971 Cougar or MustangDate code: 9/9/70

Used front drum brake hose bracket for any 1967-70 Mercury Cougar or Ford Mustang. Simple bracket bolts to the front aprons and holds the brake hoses stationary. Right and left side are the same.Ford part number C1SS-2082-C.

Reproduction flex brake hose clip for the Mercury Cougar or Ford Mustang.

Early production brake lines were routed 'over' the steering column.

Early production brake lines were routed 'over' the steering column.

Late production brake lines were routed under the steering column.

Flexible high pressure replacement brake hose for front drum brakes that fits both passenger (right hand) and driver (left hand) sides. Sold individually, please remember to order two if a pair is needed.Replaces Ford part number D1ZZ-2078-E.