Contact Us / Visit Us (click here)
If the Shopping Cart takes too long to respond, you can bypass the shopping cart and go straight to the checkout page by clicking the following link: Checkout.
International Customers Click Here [Updated 1/2024]
Loading Trivia . . .
Products (Click sub-categories above to ONLY display results for that Sub-Category) 169-192 of 202
Display Options:
Price: $83.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19021 -

Reproduction brake pedal hanger for manual brakes. Can be modified to work for power brakes.

Price: $70.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19349 -

Reproduction brake pedal hanger also known as the brake pedal support for Mercury Cougar and Ford Mustang.

Price: $70.85

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19531 -

Reproduction brake pedal hanger also known as brake pedal support for Mercury Cougar and Ford Mustang.

Price: $260.05

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41955 -

Heater Box Assembly for 1967-1968 Mustangs without air conditioning. The heater box assembly consists of the front and rear casings with doors. This is a factory type fiberglass two piece heater box/heater core casing. The heater box is a pre-assembled unit which includes the gasket and all seals. The heater plenum attaches to this assembly and directs warm air to the car. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts...

Price: $344.65

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 19897 -

Basic clam shell box as shown for cars WITHOUT AC. Keep in mind we have nice original FoMoCo units for less money! *NOTE*Kit does not contain heater blower motor, squirrel cage, or blower motor mounting plate. Check out our video below on how to replace a heater core! We used a '69 Cougar with A/C, but many of the same concepts apply to other years. ...

Price: $32.65

Buy Details

Availability: In-Stock Item
Item #: 15689 -

Reproduction pair of vent / wing window handles for the Mercury Cougar or Ford Mustang.

MSRP:$70.00
Price: $61.85

Buy Details

Availability: In-Stock Item
Item #: 13873 -

Good reproductions but we suggest you consider our good used original FORD units that have been closely inspected and have had new plastic rollers installed. *NOTE* Originals were painted semi gloss black. Often the regulator is fine and all you need is new rollers. Check out this helpful youtube video on how to replace these rollers.

MSRP:$70.00
Price: $68.27

Buy Details

Availability: In-Stock Item
Item #: 13982 -

Good reproductions but we suggest you consider our good used original FORD units that have been closely inspected and have had new plastic rollers installed for half the price! *NOTE* Originals were painted semi gloss black. Often the regulator is fine and all you need is new rollers. Check out this helpful youtube video on how to replace these rollers.

Price: $567.75

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31733 -

This latest of a series of 67 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16", black primer finish is very similar to what the later service replacement parts were from Ford. The fender weighs a few pounds more than original due to being made from slightly thicker material than OEM. Keep in mind there are no shipping fees or taxes when you pick this item up in person at our shop. Next up will be deck lids, stay tuned!...

Price: $619.97

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 31652 -

This latest of a series of 67 - 68 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16", black primer finish is very similar to what the later service replacement parts were from Ford. The hood weighs almost seven pounds more than original due to the material being made from a slightly thicker material than OEM. The hood hinges are mounted by welded in nuts instead of the J nuts like the originals. This is both good and bad in...

Price: $287.95

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 32001 -

This latest of a series of 67 - 68 reproduction sheet metal parts is just what the market has been waiting for! This listing is for the framework of the hood. This frame is for someone who needs to replace the rotted out bits of your hood frame, or for someone who simply wants a base to make a fiberglass hood on their own.  These hood frames are oversized and cannot ship through UPS or USPS, so it will need to ship via truck freight. You can expect to pay somewhere between $200-300...

Price: $287.95

Buy Details

Availability: In-Stock Item
Item #: 32005 -

This listing is for the person who only has rust under the lip at the front and does not want to pay shipping on an entire frame that must ship via truck freight. It will come as shown unless you contact us. The part will be the same price no matter where we cut it, let us know in the comments section where you would like us to cut if you want something other than what is shown. ...

Price: $62.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32847 -

This listing is for the person who only has rust under the corners at the rear and does not want to pay shipping on an entire frame that must ship via truck freight. It will come as shown unless you contact us. We can also cut the section in half if you only need one corner.  The part will be the same price no matter where we cut it, let us know in the comments section where you would like us to cut if you want something other than what is shown. ...

Price: $665.87

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 32502 -

This latest of a series of 1969 reproduction sheet metal parts is just what the market has been waiting for! The dimensions are EXACT down to the 1/16", black primer finish is very similar to what the later service replacement parts were from Ford. The hood weighs almost seven pounds more than original due to the material being made from a slightly thicker material than OEM. The hood hinges are mounted by welded in nuts instead of the J nuts like the originals. This is both good and bad in...

Price: $427.50

Buy Details

Availability: Out of Stock, Discontinued
Item #: 30175 -

Polished billet aluminum hood hinges that replace the factory hood hinges and springs with a hydraulic strut hinge.  Comes with medium duty struts for fiberglass hoods or heavy duty struts for factory / repro steel hoods.  Mounts using the same holes as the factory hood hinges with the included mounting hardware.

MSRP:$34.00
Price: $20.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: 14750 -

This listing is for One left rear (Replaces Ford part # D1ZZ-6529165-A) 1971 - 1973 Ford Mustang wheel lip mouldings. These are anodized aluminum wheel lip mouldings. These will need to be modified to fit your 1967 - 1968 Mercury Cougar (see video below). The rears will both need to be trimmed to fit correctly. You may elect to drill extra holes, it is up to you to decide whether the extra holes are drilled in the car or on the trim parts themselves. These will take some slight bending to fit...

MSRP:$34.00
Price: $20.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: 14749 -

This listing is for ONE right rear (Replaces Ford part # D1ZZ-6529164-A) 1971 - 1973 Ford Mustang wheel lip mouldings. These are anodized aluminum wheel lip mouldings. These will need to be modified to fit your 1967 - 1968 Mercury Cougar (see video below). The rears will both need to be trimmed to fit correctly at the end closest to the bumper. You may elect to drill extra holes, it is up to you to decide whether the extra holes are drilled in the car or on the trim parts themselves. These...

Price: $248.27

Buy Details

Availability: Out of Stock, Discontinued
Item #: 12821 -

New aluminum 17x8" Magnum 500 wheel with a 4 inch backspace for your Mercury Cougar or Ford Mustang. A great way to reduce the un-sprung weight on your Cat or Pony and look great while doing it! This item also includes the center cap. Lug nuts sold separately, get them here.

Price: $28.04

Buy Details

Availability: Out of Stock
Item #: 32149 -

Stainless steel throttle pedal surround trim. Self attaching to part number C9ZZ-9735-A. This used part may have some wear, but will not have broken tabs. Fine steel wool really shines these up. In the Master Parts Catalog this part is called a cover, Ford part number C9OZ-9735-A. Not all Mustangs received this trim for the accelerator pedal, but it will attach, no problem. The more common 1965-68 version also fits like a glove. You would need to place them side by side to see the minute...

Price: $169.25

Buy Details

Availability: Out of Stock, Discontinued
Item #: 26918 -

SUPPLIER IS BACKORDERED ON THIS WHEEL UNTIL FURTHER NOTICE.New aluminum 15x7" Magnum 500 wheel with a 4 inch backspace for your Mercury Cougar or Ford Mustang.  Includes generic plastic center cap.

Price: $29.57

Buy Details

Availability: Out of Stock, On Order
Item #: 14353 -

Correct three part, telescoping, round base antenna. Comes with round ridged base gasket.*Customer Feedback* "Aloha Don, The antenna showed up with the rest of the USPS sent items. Got in here in three days. Point of installation of antenna. Tie a string to the plug side of the antenna assembly when pulling out from fender so that you can use the string to pull the new antenna plug back through the fender and into the car. Thought of that after pulling antenna out. I was able to use a flexible...

Price: $629.85

Buy Details

Availability: Out of Stock, On Order
Item #: 30952 -

Finally, a quality reproduction replacement quarter panel skin for the 67 - 68 Cougar! The days of searching for good used $1000 quarters are over. This new quarter panel skin is a direct fit. Die Stamped with Excellent Quality 19 Gauge Steel like the factory used. This skin does not include the rear quarter extension panel, you can find it here.  Replaces Ford part number C7WY-6527840-AKeep in mind that this item is over-sized and will cost about $275 to drop ship a single...

Price: $161.85

Buy Details

Availability: Out of Stock, On Order
Item #: 14515 -

This used to be a decent off-shore quality pair of anodized aluminum mouldings. Our guess is that the tooling is starting to show wear and needs replacing as evidenced by the wrinkles in the corners. We have alerted the manufacturer but they can be slow to act. There are no returns on this blemished, less than perfect part. Ford issued a TSB (technical service bulletin) instructing the Service Departments to drill a hole through the rocker moulding into the lower fender and install a chrome...

Price: $472.50

Buy Details

Availability: Out of Stock, Discontinued
Item #: 13068 -

Reproduction steel lower dash panel for all 1969 Mercury Cougar and Ford Mustang with factory air conditioning. Yes, this is the reproduction lower dash offered by other vendors, but we are going to tell it as we see it; and we can't really recommend this product, the fit is just OK. We highly recommend our good used road tested dash panels. We offer them with or without A/C; 1969 and 1970 are different. See the 4 different used dash panels available in the related section. The used...