Dynacorn International

For use with factory and reproduction console parts on a 1968 Mercury Cougar or Ford Mustang. Plugs into your existing console wiring harness. Double male plug is 1968 only. Sold without light bulb. The supplier says this replaces Ford part number C7ZZ-15A808-B but that is incorrect as the Ford part number for 68 is C8ZZ-15A808-B. To use this on a 67 the plug would have to be changed to a male / female combo plug.

This is the arm rest base for the driver or passenger side on any 1971, 192 or 1973 Mercury Cougar with standard interior as well as some Mustang trim levels.  Also fits multiple other Ford /  Mercury cars of the same vintage.Replaces Ford Part Number: D1AB-5724144

Reproduction transmission support for 67 - 70 Cougars and Mustangs. We strongly recommend that you buy our used support, as these reproductions are inferior to the originals, and to be honest, they simply do not fit well.

Reproduction automatic shifter lever in chrome for the Mercury Cougar or Ford Mustang. Comes with inside cable parts. See the related items for more of your shifter needs. Check out our video on rebuilding your shifter below: ...

Reproduction shifter assembly for the Mercury Cougar or Ford Mustang equipped with the automatic transmission, but without a center console. Check out our video on rebuilding your shifter below: ...

Zinc plated, visually correct copies of the original, very prone to failure... We highly recommend buying our good used latches linked here even though they may not look as pretty. No warranty on this low quality off shore part.Replaces Ford Part # C5AZ-6243200-ACheck out our video below showing how to easily remove and reinstall your 67-68 trunk latch, lock, and cover plate, and some info on getting a new key made. ...

New aluminum 15x8" Magnum 500 wheel for your Mercury Cougar or Ford Mustang. A great way to reduce the un-sprung weight on your Cat or Pony and look great while doing it! This item also includes a center cap, but they are a cheap plastic chromed cap with a blacked out center. We recommend using the adapter plates and Magnum 500 center caps we sell from Scott Drake. Lug nuts sold separately, get them here. ...

New aluminum 17x7" Magnum 500 wheel for your Mercury Cougar or Ford Mustang. A great way to reduce the un-sprung weight on your Cat or Pony and look great while doing it!  This item also includes a center cap, but they are a cheap plastic chromed cap with a blacked out center.  We recommend using the adapter plates and Magnum 500 center caps we sell from Scott Drake. Lug nuts sold separately, get them here. ...

Complete air vent assembly with cable, knob and bracket ready to bolt to your cowl. Replaces Ford Part # : C7ZZ-6501934-A

Complete seat frame for the 1967 Cougar or the 1965 - 1967 Mustang all models with standard or Décor bucket seats. We highly recommend used cores as they are more correct and significantly less expensive. These are dropshipped directly from the manufacturer. Driver side shown.

Complete seat frame for the 1967 Cougar or the 1965 - 1967 Mustang all models with standard or Décor bucket seats. We highly recommend used cores as they are more correct and significantly less expensive. These are dropshipped directly from the manufacturer. Driver side shown.

Bottom seat frame for the 1967 Cougar or the 1965 - 1967 Mustang all models with standard or Décor bucket seats. We highly recommend used cores as they are more correct and significantly less expensive. These are dropshipped directly from the manufacturer. Driver side shown.

Bottom seat frame for the 1967 Cougar or the 1965 - 1967 Mustang all models with standard or Décor bucket seats. We highly recommend used cores as they are more correct and significantly less expensive. These are dropshipped directly from the manufacturer. Driver side shown.

1968 Mercury Cougar / Ford Mustang complete ashtray assembly with lighter.The manufacturer claims that it will fit a 1967, but this one is about 1/4 inch shorter over all compared to the 1967 unit. *NOTE* Will only fit the 1968 dashes.Click on images to enlarge. ...

In the past, you would have had to purchase a used roof cut from a parts car which meant that you would most likely have do a bit of work to get it straight and clean enough for paint. But now our friends over at Dynacorn have finally come through with a quality reproduction roof panel skin for the 1967-68 Mercury Cougar. If you need a partial roof we can cut this part down to your specifications with a plasma cutter. The price will remain the same but if you need only a half of a roof you...

Reproduction reinforcement plate designed to weld onto the lower control arms. Sold individually, we are not sure that you would want to even buy one of these. They don't fit very well, and are not contoured to any lower control arm on the market. You will be bending these to fit, prior to welding. *Note - This is a non-returnable item. 

Good quality reproduction front cross member for your 71 - 73 Cougar or Mustang. This is the frame / body piece that goes underneath your core support and receives the front ends of the strut rods. Sold as a stand alone part and does not come with strut rods or any strut rod hardware.Width: 34.75"Diagonal from outer bottom corner to outer top edge: 5"

This reproduction radiator / core support assembly includes the lower crossmember. This is the very best one made! Will come with the cut outs for the Mustang hood twist locks and the holes came standard on all 1970 Cougar and Mustangs.Replaces Ford # D0ZZ-16138-A.

This reproduction radiator / core support assembly includes the lower crossmember and is the very best one made! The outer width on the frame rails for the hardtops is 35-1/2 inches, a convertible has a width of 35-1/4 inches. A good body man should be able to make a hardtop core support fit a convertible, but know that it is different. We generally have 4-6 convertibles on the ground in the wrecking yard at any given time, so please call 503-463-1130 for your convertible needs.Replaces Ford #...

THE SUPPLIER IS CURRENTLY OUT OF STOCK ON THIS ITEM. WE WILL UPDATE THIS LISTING WHEN IT IS AVAILABLE AGAIN.This reproduction radiator / core support assembly includes the lower crossmember and is for Mercury Cougar and Ford Mustang. Replaces Ford number C9ZZ-16138-A.

Reproduction radiator / core support for Mercury Cougar and Ford Mustang. This is the very best one made! Replaces Ford part # C7ZZ-16138-B and C7ZZ-6510852-B together.

Good for all 71-73 Cougars and Mustangs. This extension extends from the passenger side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

Good for all 71-73 Cougars and Mustangs. This extension extends from the driver side rear fender apron to the top of the cowl.This rear fender apron extension is a great choice for your damaged, rusted or missing panel. Made from stamped steel, just like the original. The extension fits in place between the passenger side rear fender apron and the top of the cowl. It provides for a sturdy, stable mounting area for the far rear top fender bolt and the rear hood hinge bolts. ...

Reproduction Crossmember / Under Engine for the 1971 - 1973 Mercury Cougar / 1971 - 1973 Ford Mustang