Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Use Coupon Code "Clearance10" to save 10% off anything listed in the Clearance / Overstock section
(discount can not be combined with other discounts)
Filter By


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 241-282 of 282
$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 26121 -

The four part, die cast vinyl top trim kit requires 17 (right rear under back glass is the odd ball that requires five fasteners) of these speed nut fasteners. These do not work in conjunction with the various dealer installed aluminum vinyl top mouldings. *NOTE* The factory nuts had a drop of silicone or trim adhesive inside the bowl that acted as a seal. This procedure is advised for reinstallation.

$0 Price: $4.55

Buy Details

Availability: In-Stock Item
Item #: 15840 -

Replacement throttle pedal spring for your 71 - 73 Cougar or Mustang. Easy to replace, keeps correct tension on your gas pedal.

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10466 -

Single black Phillips oval headed screw for attaching the face pads onto 1967 Mercury Standard Cougars (non-XR7 models). Sold individually, we also sell these screws under SKU 100022599 in sets of 13 (better value). *Note - This screw is glossy black in color.

$0 Price: $1.29

Buy Details

Availability: In-Stock Item
Item #: 41413 -

Reproduction Universal Strap / Medium Wire Loom for the 1967 Mercury Cougar or Ford Mustang 

$0 Price: $5.35

Buy Details

Availability: In-Stock Item
Item #: 41261 -

Stud for attaching exhaust manifold heat shield on passenger side. Sold individually Phosphate & Oil (gray-black) Replaces Ford Part # 382338-S

$0 Price: $34.65

Buy Details

Availability: In-Stock Item
Item #: 26237 -

Reproduction chrome center cap with blue background and chrome Mercury man logo for the Mercury Cougar. Better than original! These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the...

$0 Price: $39.45

Buy Details

Availability: In-Stock Item
Item #: 26245 -

Reproduction chrome center cap with red background and chrome Mercury man logo for the Mercury Cougar. These are held on by a sturdy plate and two screws from the backside which is much better than the original clip-on type. There are other reproductions out there, but none are of this quality. When using center caps on Legendary wheels, you will need these adapter plates. *NOTE* When installing these die cast center caps, keep in mind over tightening will separate the backing from...

$0 Price: $1.55

Buy Details

Availability: In-Stock Item
Item #: 26530 -

Fills the hole in the core support where the A/C lines pass through to the condenser. Replaces part # C9ZZ-19819.

$0 Price: $6.36

Buy Details

Availability: In-Stock Item
Item #: 14198 -

This switch looks very close to original. On close inspection you will notice that there is no Autolite logo and the plastic is not as milky colored as the originals. Sold Individually. Replaces Ford Part #: C8AZ-13713-C.

$0 Price: $1.29

Buy Details

Availability: In-Stock Item
Item #: 41420 -

Reproduction Tail Light / Trunk Light / Courtesy Light Loom Clip for the 1967 - 1968 Mercury Cougar or Ford Mustang 

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 27465 -

Clip for mounting the throttle linkage rod rod to the carburetor and mounts C-4 or C-6 throttle cables to the throttle bell cranks.Replaces Ford part number C2VY-9826-A.

$0 Price: $7.75

Buy Details

Availability: In-Stock Item
Item #: 26290 -

Reproduction Tire Pressure Decal for the 1967 Mercury Cougar

$0 Price: $17.87

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 14964 -

This is a ignition nut tool used to take the ignition nut out of 1969 Cougar. These are made from HRS steel and are milled to fit the bezel. No more scratches trying to remove with the wrong tools.

$29.99 Price: $34.07

Buy Details

Availability: In-Stock Item
Item #: 13780 -

This is for the person who already has a decal or XR7G emblem to place in the center section. Maybe you have a custom idea? Same great quality and flawless fit as our other deck lock covers. *NOTE* After a long hiatus these are finally back in stock! They were worth the wait, the quality is really good on this new reproduction. Check out this video

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 41144 -

Seven (7) of these acorn nuts are used to hold the trunk trim moulding on to the trunk. Replaces Ford Part # 377767 For more insight on this tricky trunk trim, check out our video below: ...

$0 Price: $3.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 41384 -

Used steering column wiring harness plug. Replacement plug for all 1968-69 Mercury Cougar and Ford Mustang, with tilt or fixed steering columns. Generic Ford part likely lots of applications between 1968-69, Ford, Mercury, & Lincoln. This plug is natural or white, there is also a black color version of this plug used by Ford 1970-72.Ford part number C8AZ-14489-S.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject....

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 11324 -

These coarse thread nuts have an integrated lock washer with serations for the Mercury Cougar or Ford Mustang. They will ONLY work with the U-Bolts used in conjunction with the lowering kits. The thread size is 7/16"-14. *NOTE* Eight of these are required per car and are sold individually.

$150.00 Price: $167.75

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15017 -

A quality reproduction black vinyl top that looks and fits great. This top has the correct pattern, however the finish is a bit shinny and will not look original to the discriminating eye. This top will also have a seam in the A pillar.

MSRP:$250.00
$250.00 Price: $218.88

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15026 -

A top quality replacement vinyl top that looks great and fits perfect. We talked to the manufacturer about making 1/2 vinyl tops, but they said that they would need to charge the same amount for the 1/2 top and all they would do is just cut the top to the length requested, so their suggestion was to just let customers who need a 1/2 vinyl top purchase the full vinyl top and let them cut the top to the exact dimensions for their top.

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26338 -

Decal Text: AutoliteRegulator 15V C9TF-10316-A NEG

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 22223 -

These new taillight mounting washers are sold individually for your Mercury Cougar. Normally installed with a dollop of black goo for sealing out moisture. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...

$0 Price: $1.16

Buy Details

Availability: In-Stock Item
Item #: 41746 -

Bumper bolt wavy washer sold individually. Also available in our bumper bolt kit.Please know that chrome cracking from the installation of bumper bolts on our rechromed bumpers is not covered under warranty. We have observed that some reproduction wavy washers are of a thicker material than original and require more torque to flatten out properly for a good fit. We suggest that no matter what thickness your repro wavy washer is that you flatten them out in a vise prior to installation so as...

$0 Price: $22.75

Buy Details

Availability: In-Stock Item
Item #: 25890 -

Since no like manual is available for the Cougar, this is the next best thing since much of the content applies to the Cougar. 184 pages.

$0 Price: $25.07

Buy Details

Availability: In-Stock Item
Item #: 15267 -

Reproduction Weld / Sealant Assembly Manual for the 1968 Ford Mustang.

$0 Price: $17.06

Buy Details

Availability: In-Stock Item
Item #: 11962 -

Reproduction light blue headliner windlace for the driver or passenger side of the Mercury Cougar or Ford Mustang. This unit helps hold the sides of the headliner in place and covers the pinch weld; it is also known as the pinch weld moulding. This is an individual piece and is 7 feet of windlace. You will have to trim this piece to fit and it should be around 6ft each when correctly trimmed. This windlace is correct for 1967-70, however the 1967-68 Cougar with the décor group option used a...

$0 Price: $5.85

Buy Details

Availability: In-Stock Item
Item #: 10099 -

Reproduction medium blue rear interior panel windlace that helps hold the rear interior panels in place. It is also known as the pinch weld moulding. This one piece of windlace will fit on either the driver and passenger side and is about 2 total feet worth of windlace. You will have to trim this unit to fit and it should be about 20 inches when correctly trimmed.*NOTE* There are two types of this trim found in the 1967-68, the smooth or rough texture. ...

$0 Price: $0.85

Buy Details

Availability: In-Stock Item
Item #: 10654 -

Reproduction wing nut for the snorkel on your air cleaner. Good for the 1967 Cougar or Mustang.

$2.50 Price: $14.25

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 10912 -

The Wittek Company manufactured the tower clamps used on the Cougar from 1967 to 1973, the Mustang from 1964 1/2 to 1973, as well as many other Ford and Mercury cars during that period. In October or 1993, the company filed for bankruptcy. This has made the tower clamp unavailable to the classic car restorer. Our supplier was able to bid at the auction for enough of the original tooling and parts to make these clamps available again. Other companies have also reproduced these clamps, but...

$0 Price: $31.95

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 52309 -

Reproduction Wittek tower hose clamp kit for the Mercury Cougar or Ford Mustang equipped with the 429 engine. This set of 10 clamps is concours correct and features the correct date stamps. It is often little details like this that separates first and second place when your precious Cat or Pony is being judged.

$2.50 Price: $2.99

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 10916 -

The Wittek Company manufactured the tower clamps used on the Cougar from 1967 to 1973, the Mustang from 1964 1/2 to 1973, as well as many other Ford and Mercury cars during that period. In October or 1993, the company filed for bankruptcy. This has made the tower clamp unavailable to the classic car restorer. Our supplier was able to bid at the auction for enough of the original tooling and parts to make these clamps available again. Other companies have also reproduced these clamps, but...

$0 Price: $2.99

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 52286 -

The Wittek Company manufactured the tower clamps used on the Cougar from 1967 to 1973, the Mustang from 1964 1/2 to 1973, as well as many other Ford and Mercury cars during that period. In October or 1993, the company filed for bankruptcy. This has made the tower clamp unavailable to the classic car restorer. Our supplier was able to bid at the auction for enough of the original tooling and parts to make these clamps available again. Other companies have also reproduced these clamps, but...

$0 Price: $2.99

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 52288 -

The Wittek Company manufactured the tower clamps used on the Cougar from 1967 to 1973, the Mustang from 1964 1/2 to 1973, as well as many other Ford and Mercury cars during that period. In October or 1993, the company filed for bankruptcy. This has made the tower clamp unavailable to the classic car restorer. Our supplier was able to bid at the auction for enough of the original tooling and parts to make these clamps available again. Other companies have also reproduced these clamps, but...

$0 Price: $3.87

Buy Details

Availability: In-Stock Item
Item #: 53240 -

New black oval Phillips headed screws with correct sized heads for seating into the original and reproduction 1967 XR7 rocker hash marks.

$0 Price: $54.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 13884 -

These two piece adhesive XR7-G emblems are made by the OEM supplier to Ford. As you compare these to the now obsolete version supplied through Ford back in the day, you will see these are nowhere close to the original version. One may deduct that since we have the lowest advertised price with the most uncomplimentary description that ours are in some way different than the "other guys". Not so... We just have different opinions of what quality does and does not look like. If it's crap, we'll...

$0 Price: $64.85

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 13885 -

Great quality for the money, but you will have a gap showing around the perimeter. When looking at the backside of these XR7-G emblems, you will see the green vinyl backing on the two sided tape. A NOS emblem, (original emblem sold by Ford) will have green paper backing. These are not technically a reproduction as they are made by the OEM supplier. Click on images to enlarge. Notice the gaps when installed on our reproduction deck lock cover. Here are some pictures on the new emblem side by...

MSRP:$426.94
$426.94 Price: $305.00

Buy Details

Availability: Out of Stock, Discontinued
Item #: 33888 -

A few Eliminators came with standard interior, but convertibles did not come factory with a standard interior. These sets feature horizontal stitching and correct grain of vinyl. Below is a set of pictures of this set stretched on a bucket seat frame.               ...

MSRP:$877.44
$877.44 Price: $626.75

Buy Details

Availability: Out of Stock, Discontinued
Item #: 33887 -

Door Tag Trim Code: 6A. Black XR7 Vinyl Upholstery kit to cover the rear seat for the convertible.

  • Next >