Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 
Filter Products by


Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1345-1392 of 1448
$0 Price: $299.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 32931 -

NOTE! When we ship a rear end, we will remove the third member and ship it in a separate box. Some assembly will be required. Housing overall width - 54-1/4 inches flange to flange. Overall width measured from faces of axles, not the tips. All 1967-70 have the same overall width of 59-1/2 inches. This economy version of our 8 inch rear end assembly is perfect for those intending to add rear disc brakes to their car.  Spring perches are 43 inches apart on center. Axle...

$0 Price: $315.77

Buy Details

Availability: Out of Stock
Item #: 32621 -

Driver side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar convertible. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-7610125-B.* Note - this item has dimensions in excess of 75 inches, and will ship as...

$0 Price: $315.77

Buy Details

Availability: Out of Stock
Item #: 32622 -

Passenger side, rear frame rail, from a 1971, 1972, and 1973 Mercury Cougar hard top. The Ford MPC shows a couple of different numbers and exceptions for this item. It may be the presence or absence of the nutserts for the rear sway bar option. If the sway bar nutserts are needed, please contact WCCC for availability. Full length, we cut so that there is some remaining metal on the edges. Ford part number D2WY-7610124-B.* Note - this item has dimensions in excess of 75 inches, and will...

$0 Price: $459.86

Buy Details

Availability: Out of Stock
Item #: 12858 -

This panel was used on all convertible models without retractable rear belts. Please contact us for choice of color, power or manual windows and with or without seat belt re-tractors. It will not show serious UV damage with the "chalky look" and will have no extra holes drilled.

$0 Price: $404.87

Buy Details

Availability: Out of Stock
Item #: 10039 -

Rear seat bottom or lower cushion from any 1969-70 Mercury Cougar or Ford Mustang convertible. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship.Replaces Ford part number C9WB-7663120.*Note - Does not fit coupe or fastback.Lower frame measures 46" at it's widest point and 18.5" high This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in...

$0 Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 12818 -

Rear seat bottom or lower cushion from any 1971-72 Mercury Cougar or Ford Mustang convertible. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship. Verify that both of your seat belts anchor under the seat. All of 1973 and possibly late 1972 had the retractor portion of the seat belts in the rear interior panels. That seat belt end, would anchor in the panel area.Replaces Ford part number D1ZB-7663120.*Note - Does not fit coupe or...

$0 Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 12825 -

Rear seat bottom or lower cushion from any 1972-73 Mercury Cougar or Ford Mustang convertible. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship. Verify that only two of your seat belts anchor, are under the seat. All of 1973 and possibly late 1972 had the retractor portion of the seat belts in the rear interior panels. That seat belt end, would anchor in the panel area.Replaces Ford part number D3ZB-7663120.*Note - Does not fit...

$0 Price: $259.88

Buy Details

Availability: Out of Stock
Item #: 10040 -

Rear seat back or upper cushion from any 1969-70 Mercury Cougar or Ford Mustang convertible. Minimal rust, solid, just needs clean up and upholstery. We usually leave the upholstery on the frame when we ship. Replaces Ford part number C9WB-7666700. This part number or engineering number would have originally been stamped into a tag that was attached to the bottom side of the seat. Though these seem to fit in a 64-70 Mustang convertible, the correct engineering number that would...

$0 Price: $375.89

Buy Details

Availability: Out of Stock
Item #: 22665 -

Rear defog conversion kit for most 1969-70 Mercury Cougar and all 1969-70 Ford Mustang Coupes. Includes hang down switch with wiring, long harness to blower motor, and blower motor and grille cover which installs in the rear package tray. Please see your electrical schematic for connection details. Excludes 1970 XR7 models, those cars had the defog switch integrated into the XR7 switch panel. This set up can easily be installed into a 1969 XR7 as well. You may need to purchase an accessory...

$0 Price: $306.86

Buy Details

Availability: Out of Stock
Item #: 11420 -

Good used rear window with no deep scratches (multiple faint scratches and water spots often will be present). Not perfect but the best you could expect to find from a 50 year old plus parts car and will of course be a better fit than repro. For those wanting Grade "A" glass, we recommend calling us so we can discuss with you the glass that we have available as each piece differs. Need a little help identifying some of the markings on your glass? Check out the Guide to Original Date Coded...

$0 Price: $306.86

Buy Details

Availability: Out of Stock
Item #: 11421 -

Good used rear window with no deep scratches (multiple faint scratches and water spots often will be present). Not perfect but the best you could expect to find from a 50 year old plus parts car and will of course be a better fit than repro. For those wanting Grade "A" glass, we recommend calling us so we can discuss with you the glass that we have available as each piece differs. Need a little help identifying some of the markings on your glass? Check out the Guide to Original Date Coded...

$0 Price: $349.88

Buy Details

Availability: Out of Stock
Item #: 11431 -

Very good used door glass with no deep scratches (multiple faint scratches and water spots often will be present). Not perfect but the best you could expect to find from a 50 year old plus parts car and will of course be a better fit than repro. Look for the SUN-X logo to determine if your glass is tinted or not. For those wanting Grade "A" glass, we recommend calling us so we can discuss with you the glass that we have available.Need a little help identifying some of the markings on your...

$0 Price: $315.86

Buy Details

Availability: Out of Stock
Item #: 31451 -

Core regulator assembly or brain box for factory speed control on a early 1967 Mercury Cougar or Ford Mustang. This is the Curtis-Wright regulator assembly. Basic Ford part number is 9D757, research has not turned up the complete Ford number possibly C7ZZ-9D757-A. Core grade, most likely will need servicing or repair. Bare unit, no brackets, wiring or cables. *Note - We do not have the tools or know how to test this unit. 

$0 Price: $315.86

Buy Details

Availability: Out of Stock
Item #: 31452 -

Core regulator assembly or brain box for factory speed control on a early 1967 Mercury Cougar or Ford Mustang. This is the Perfect Circle regulator assembly. Basic Ford part number is 9D757, research has not turned up the complete Ford number possibly C7VY-9D757-B. Core grade, most likely will need servicing or repair. Bare unit, no brackets, wiring or cables. *Note - We do not have the tools or know how to test this unit. 

$0 Price: $315.86

Buy Details

Availability: Out of Stock
Item #: 31453 -

Core regulator assembly or brain box for factory speed control on a early 1968-69 Mercury Cougar or Ford Mustang. This is the Perfect Circle regulator assembly. Basic Ford part number is 9D757, research has not turned up the complete Ford number possibly C8VY-9D757-A. Core grade, most likely will need servicing or repair. Bare unit, no brackets, wiring or cables. *Note - We do not have the tools or know how to test this unit. 

$0 Price: $292.50

Buy Details

Availability: Out of Stock
Item #: 32900 -

New old stock Ford accessory cable trunk popper. Fits late 1967 - 1973 Mercury Cougar and other Ford products. Lever release, complete kit, NOS Ford. Detailed instructions included.  Ford part number C7AZ-62432A00-A. *Note - All 1967, and most 1968 trunk lids will not have a large enough access opening in the under side structure to allow the trunk latch to be inserted. 

$0 Price: $391.75

Buy Details

Availability: Out of Stock
Item #: 41510 -

Reproduction, non functional "dummy" correct looking rev limiter. Also referred to as an electronic engine governor or RPM limiter. These were used on 1970 428 Cobra Jet engines when the car was equipped with a manual transmission. Replaces Ford part number DOZF-12450-A.

$0 Price: $391.75

Buy Details

Availability: Out of Stock
Item #: 41512 -

Reproduction, non functional "dummy" correct looking rev limiter. Also referred to as an electronic engine governor or RPM limiter. These were used on 1970 BOSS 302 engines. Replaces Ford part number DOZF-12450-B.Note that Ford used a solid state voltage regulator that uses the same case starting in 1966 that has been found on Trucks, Thunderbirds, Galaxies and other full size cars. These units have been known to have engineering numbers of C6AF-10316-A, C6TF-10316-A, and D2HF-10316-AA...

$0 Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 14-1019 -

This is an example of the best grade A set we can come up with. This was a standard set that was converted to deluxe by installing the reproduction chrome buckle bezels. The mounting hardware is sold separate. Keep in mind we have over 200 complete sets of belts for 1967-73 in many colors and conditions. We will also sell individual belts and related parts. NOTE: The seat belts you receive will most likely not have intact tags. Check out our video "All about seat belts" below. ...

$0 Price: $329.85

Buy Details

Availability: Out of Stock
Item #: 14-1036 -

This is a 100% complete, functional set taken from multiple 1967 Mercury Cougars. Often it takes 2-3 cars to put together one set, decent driver quality set as the driver side will often show excessive wear and other belts can be rusted or missing. The set has been thoroughly inspected, cleaned and redyed with RIT dye in a boiling vat with vinegar. This set is driver quality and if one looks closely you will probably find a small crack in each of the re-tractor plastic covers, a few dots of...

$0 Price: $299.88

Buy Details

Availability: Out of Stock
Item #: 14-0053 -

This is a complete set of Deluxe (chrome bands on buckles) safety belts removed from a 1969 hardtop minus torx bolt hardware. The set consists of two front retractors (they are not side specific) that measure 22" fully extended tip to tip, four lap belts bonded in pairs with the shoulder portion measuring 45" and the lap belt portion measuring 30" total length. The two male rear belts measure 20" and mount next to the rear interior panels and the female buckle side measures 36" fully extended....

$0 Price: $265.85

Buy Details

Availability: Out of Stock
Item #: 15841 -

The Cougar used a seat riser that was about one inch lower in height compared to the Mustang so as to compensate for the more plush foam and upholstery.

$0 Price: $333.35

Buy Details

Availability: Out of Stock
Item #: 30399 -

NOS FoMoCo part in the box. This is the rubber bellows also called the vacuum servo on many speed or cruise control units installed on many Ford products in the 1960's. Likely a component of the servo assembly as installed on 1967-69 Mercury Cougar and Ford Mustangs. Likely also could be used on 1965-71 Lincoln, Mercury or Ford cars with factory installed speed control option.Very hard part to find, the rubber deteriorates from the heat generated by the engines on these cars. Please check your...

$0 Price: $373.35

Buy Details

Availability: Out of Stock
Item #: 18995 -

Beautifully detailed reproduction of the original wheel mounted on the 1965 GT-350. The aluminum center is CNC machined and set into a steel rim that features triple plate high luster chrome. Center cap sold separately. You can find the styled wheel center caps here.Find the lug nuts here.*NOTE* Limited availability on this unit, so give us a call before you order. Please allow 4 to 5 weeks for delivery. ...

$0 Price: $404.87

Buy Details

Availability: Out of Stock
Item #: 32089 -

Used T shift handle, originally an over the counter Mercury dress-up accessory. The only Cougars that came from the factory with this real wood shifter were the 1970 Eliminator and 1968 XR7-G. The XR7-G used a gold Cougar "Walking Cat" emblem and the 1970 Eliminator used the silver emblem.  NOTE: The chrome center of the handle has been re-chromed. Also, the emblem and wooden handle ends will not be glued together, assembly will be required. Check out our video on rebuilding...

$0 Price: $358.88

Buy Details

Availability: Out of Stock
Item #: 11734 -

Get a grip with this very rare find! This used original Hurst T handle, or shifter handle, is a one year only unit with no set-screw as found on the 1970 shifter. Ford part # D1OZ-7213-A. Check out our video on rebuilding your shifter below: ...

$0 Price: $303.89

Buy Details

Availability: Out of Stock
Item #: 20019 -

Mint Condition NOS part for your XR7-G equipped with automatic transmission. Notice the texture or "Fur" on the Cougar. The majority are smooth from the factory. We have no explanation for this variation. Check out our video on rebuilding your shifter below: ...

$0 Price: $285.89

Buy Details

Availability: Out of Stock
Item #: 30258 -

Very hard to find 69 - 70 Shelby / 68 - 69 Cougar 4 speed shifter knob. These very rarely come up for sale used and when they do they are expensive. Correct for 1968-69 Mercury Cougar XR7 and 1969-70 Ford Shelby Mustang, all with 4 speed manual transmissions. Ford part number C8WY-7113-C. Check out our video on rebuilding your shifter below: ...

$0 Price: $465.89

Buy Details

Availability: Out of Stock
Item #: 20006 -

NOS Real woodgrain knob for 1968 XR7-G Mercury Cougars with the 4 speed only. One RARE little unit! Ford master part # C8WY-7213-A.*TRIVIA* Only 26 XR7-G's were built with a 4 speed transmission. Check out our video on rebuilding your shifter below: ...

$164.99 Price: $276.17

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 41484 -

Factory detailing and triple chrome plating distinguish this tubular shift handles from the rest. Cable and T-lever included. American made for quality workmanship. Replaces Ford Part #: C5ZZ-7210-M. Check out this video Check out our video on rebuilding your shifter below: ...

$0 Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 16-0025 -

This rod is unique to 1970 because it was the first year of the lock out rod. Very hard to come by when you consider there was no 390 option for 1970. Notice this rod features two different part numbers. Adjustable rod that connects the floor shifter to the big block C-6 automatic transmissions. C6 transmissions only, code "U" on your door data plate tag. 428 Cobra Jet engines were the only Cougar engines to receive the C-6 automatic transmission. Shift rod approximately 17-1/2 inches long....

$0 Price: $314.87

Buy Details

Availability: Out of Stock
Item #: 25545 -

D2ZZ-7210-A Round chromed �Hurst� labeled shifter for all 1972 and 1973 Mercury Cougar and Ford Mustangs with factory installed 4 speed transmissions. Tough part to find loose, most will be attached to the correct vintage Hurst Competition shifter mechanism. These shifters will not come with the round shifter ball knob. Check out our video on rebuilding your shifter below: ...

$0 Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10983 -

D0ZZ-7400-D Hurst built 4 speed manual shift control assembly for any 1970 - 1971 Mercury Cougar or Ford Mustang. Check out our video on rebuilding your shifter below: ...

$0 Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10975 -

C7ZZ-7400-C 4 Speed manual transmission shift control assembly for any 1967 Mercury Cougar and Ford Mustang and 1968's up until 1-2-1968. Big block 390 engines only. Check out our video on rebuilding your shifter below: ...

$0 Price: $275.85

Buy Details

Availability: Out of Stock
Item #: 10978 -

C8ZZ-7400-C 4 Speed manual transmission shift control assembly for any 1968 Mercury Cougar and Ford Mustang after 1-2-1968. Big block 390 and 428CJ engines only. Check out our video on rebuilding your shifter below: ...

$0 Price: $270.86

Buy Details

Availability: Out of Stock
Item #: 19241 -

This tower is identical to every other 1967-70 tower in every way except the reinforcement plate.The reinforced shock towers came out in late March 1968 and were used on all big block Cougars and Mustangs. 390-2V / 390-4V / 427 / 428CJ. No specific part number exists for this structural front suspension section with or without wrap around bracing. This example was actually taken from a very early 1969 San Jose built Cougar and is identical to the late 68 Big Block Tower. The only reason you...

$0 Price: $270.86

Buy Details

Availability: Out of Stock
Item #: 19280 -

This tower is identical to every other 1967-70 tower in every way except the reinforcement plate. In late 1968 390-427-428 Mercury Cougar and Ford Mustang came with this reinforced tower due to a problem they were having with structural cracking. No specific part number for this structural front suspension section with or without wrap around bracing. This example was actually taken from a very early 1969 San Jose built Cougar and is identical to the late 68 Big Block Tower. The only reason you...

$0 Price: $369.86

Buy Details

Availability: Out of Stock
Item #: 25519 -

Here is a real treat! New in the Ford box driver side (left hand) mirror, very hard to come by these days. *NOTE* XR7 and GT Cougars ordered with a "special paint" color got this chrome mirror in place of the color keyed sport mirror that came standard with those option packages. A small credit was given for the trade down and was shown on the invoice. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $308.85

Buy Details

Availability: Out of Stock
Item #: 33605 -

NOS unpackaged driver side manual adjust mirror. Shows some shelf wear, a small scuff on the base and a smudge on the glass. Don't forget to select a mounting gasket and mounting kit if needed. Casting number reads C7WB-17743-B Ford part # C7WY-17696-A. *NOTE* Mustang uses a different mirror and will not fit contrary to what you may have seen advertised elsewhere! Hole spacing: 4 3/8" Do you have riv-nut questions? Here are riv-nut answers! ...

$0 Price: $259.88

Buy Details

Availability: Out of Stock
Item #: 26941 -

Good working grade "A" driver side (left hand) mirror that will look as good as the one shown here. Since the wand is recessed into the door panel on the 1969 Cougar, the wand is not prone to breaking off like the 1970 version which protrudes straight out. NOTE - Cable length should be 18" from the base of the mirror to the inner end of the remote wand assembly. In order to keep the cable from hitting the window, there's usually a clip to hold it away from the glass. This clip is hard to come...

$0 Price: $308.88

Buy Details

Availability: In-Stock Item
Item #: 31940 -

This NOS remote mirror came to use without a Autolite or Motorcraft box. Current offering while new and never installed does have a small manufacturers defect in the casting as shown. Found on the drivers side of standard model Cougars, no passenger side mate was ever offered with this mirror. Two different versions of this mirror are found on 1971-73 Mecury Cougars, either casting number D1WB-17743-AA or C9AB-17743-A. This mirror has the Ford casting number D1WB-17743-AA. Do...

$0 Price: $358.88

Buy Details

Availability: Out of Stock
Item #: 19573 -

Rare find. The difference between this and a 69 is the 90 degree angled portion that mounts to your door panel. This is correct for a XR7 or Eliminator. The 1970 sport mirror did not use a chromed base at any time. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $359.87

Buy Details

Availability: Out of Stock
Item #: 30443 -

Complete Service part mirror assembly for any Cougar with the sport / bullet racing style mirror. Casting number as seen on base is D1WB-17743-B.Ford part number D1WY-17682-A

$225.00 Price: $293.85

Buy Details

Availability: Out of Stock
Item #: 27047 -

NOS passenger side (right hand) sport mirror that is correct for the Mercury Cougar. This will also work on 1969-70 Cougar, but base height is just a little bit taller. Replaces Ford part # D1OB-17713 Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video Check out this video ...

$0 Price: $395.87

Buy Details

Availability: Out of Stock
Item #: 25822 -

NOS driver side (left hand) external remote mirror assembly for the Mercury Cougar and is for 1969 Cougar only. Ford Part # C9WY-17682-D. Do you have questions about installing a passenger side mirror or using Riv-Nuts? Check out this video ...

$0 Price: $257.85

Buy Details

Availability: Out of Stock
Item #: 24886 -

Left side Thermactor smog tube with the jog and bracket around the coil. Bare tube, installation hardware is not included. Not always available, hard to keep on the shelf, look for our reproduction tube set (right and left) available soon. Must have the correct cylinder heads with the drilled and tapped holes for these tubes. Also called air manifold, this unit is part of the air manifold assembly.

$0 Price: $290.88

Buy Details

Availability: Out of Stock
Item #: 24885 -

Right side Thermactor smog tube. Installation hardware is included as shown. Not always available, hard to keep on the shelf, we always have the reproduction tube set (right and left) in stock. Must have the correct cylinder heads with the drilled and tapped holes for these tubes.