Wiring Harnesses / Looms

Used wiring pigtail that runs from the 14209 under hood harness to the passenger side horn.

Used wiring pigtail that runs from the 14290 under hood harness to the right hand (passenger) side park / turn signal. 

Used wiring pigtail that runs from the under hood harness to the small post on the starter side of the starter relay on the 67 - 68 Standard and XR7 model Cougars. 

Used under hood wiring harness repair plug and pigtail connection to the under dash harness at the fuse block / box for the Mercury Cougar XR7 produced after 3/3/1969. This is part of the 14290 under hood wiring harness.

Used wiring harness that runs from the 14290 under hood harness to the voltage regulator on the 67 - 68 Standard Cougar.

Used wiring pigtail which is part of the 14290 under hood harness and runs from the battery side of the starter relay to the voltage regulator (yellow) and the fuse box (black/yellow).

Used wiring harness that runs from the 14290 under hood harness to the voltage regulator on the 67 - 68 XR7 Cougar.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the alternator harness on the 67 - 68 Standard model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the alternator harness on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the ignition switch on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the starter solenoid on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator ground bolt on the 67-68 Standard and XR7 model Cougars.

Used pigtail that runs from the main 14401 harness to the console courtesy light (blue plug) on your 67 - 68 standard Cougar.

Used wiring pigtail that runs from the 14401 main wiring harness to the PRNDL light (red plug) on your standard 67 - 68 Cougar.

Used wiring pigtail that runs from the 14401 main wiring harness to the tachometer on your 67 XR7 Cougar.

Used wiring pigtail that runs from the main under hood harness to the headlight harness, parking light harness and differential switch. Located above the left hand (driver side) kick panel behind the heater controls.

Used under dash wiring harness repair plug and pigtail from the wiper motor to the main 14401 harness for the Mercury Cougar. We also carry the mate for this pigtail. You can check wire colors for correct pigtail.

Wiring pigtail for the low fuel sending units on 1973 Mercury Cougar XR7 and standard models with low fuel warning light, cut from a taillight wiring harness. The wiring is all integrated in 1973, unlike 1971-72 which has a separate harness for the fuel sending unit. The Safety Convenience Package included a low fuel warning light. This pigtail has three wires which attaches to the three prongs on the D1WF-9275-AC low fuel sending units. Ford part number is D3WB-14406-B or D3WY-14406-B. *Note...

Original stereo radio pigtail and plug. From a 1972-73 Mercury Cougar or Ford Mustang stereo harness. Has correct plug, wire colors and makings for the plug that connects to the factory stereo radio  *Note This is the speaker radio lead, from the speaker harness.

Reproduction wiring pigtail repair kit for the sequential box on the EARLY 1967 Cougar. Keep in mind that early and late 67's used different plugs, so be sure to order the right version. Included are: 1 six pin connector1 eight pin connector2 four pin connectors

Reproduction wiring pigtail repair kit for the sequential box on the LATE 1967 Cougar. Keep in mind that early and late 67's used different plugs, so be sure to order the right version. Included are: 1 six pin connector1 eight pin connector1 four pin connector

Reproduction wiring pigtail repair kit for the sequential box on the 1968 Cougar.  Included are: 1 four pin red connector1 four pin black square connector1 four pin white square connector1 four pin flat connector 1 two pin connector

Reproduction wiring pigtail repair kit for the sequential box on the 1969 - 1973 Cougar.  Included are: 1 five pin red connector1 five pin black connector

Used under dash wiring harness repair bare ignition switch plug for the Mercury Cougar. This is the plug only, no wiring pigtail, and is part of the 14401 main under dash wiring harness.

Used under dash wiring harness repair bare ignition switch plug for the Mercury Cougar. This is the plug only, no wiring pigtail, and is part of the 14401 main under dash wiring harness.

Original used AM radio power under dash wiring pigtail for all 1968 Mercury Cougar (standard and XR7) and Ford Mustangs with factory AM radios. This double female plugged wiring pigtail is for your factory Ford AM radio. We have a limited supply of these but also offer a quality reproduction version of this wiring plug pigtail. *Note - this wire is part of the main under dash or 14401 wiring harness.Fits: 1968 Mercury Cougar 1968 Ford Mustang ...

Used plastic shield affixed to the quarter to protect the wiring to the power window switch. Left and right are the same.Ford Part Number D1ZB-14A099-BB

Replaces Ford Part # D0WY-14305-C & D0WY-14305-A

Used rear window defog switch and knob assembly with mounting bracket for the 71 - 73 Standard Cougar.

D0ZB-13A769-B Left side door wiring harness with decor interior as found on 69 - 70 Standard Cougar (non-XR7's) with door courtesy lights. Also used on 1970 Ford Mustang with decor interiors which include Grande and Mach 1. Wiring harness for courtesy door lights only. Master part number D0ZZ-13A769-B. This is a grade "B" good used harness, expect minor splices, damaged rubber boots or other easily repairable minor damage. *Note* Does not include door ajar or factory stereo wiring plugs. ...

D0ZB-13A769-D-AGRADE Left side door wiring harness with decor interior as found on 1970 Standard Cougar (non-XR7's) with door courtesy lights and factory installed stereo. Also used on 1970 Ford Mustang with decor interiors which include Grande and Mach 1. Wiring harness for courtesy door lights and factory door speakers only. Master part number D0ZZ-13A769-D. This is a grade "A" premium grade harness that is not sun damaged, spliced or damaged in anyway.

C9WY-13A769-A-AGRADE Right side door wiring harness that includes door ajar and courtesy lights. Found on 1969 XR7's and 1969 Standard Cougar with Safety Convenience Package. This is a grade "A" premium grade harness that is not sun damaged, spliced or damaged in anyway.

C9WY-13A769-A Right side door wiring harness that includes door ajar and courtesy lights. Found on 1969 XR7's and 1969 Standard Cougar with Safety Convenience Package. This is a grade "B" good used harness, expect minor splices, damaged rubber boots or other easily repairable minor damage.

C9WY-13A769-C Right side door wiring harness that includes door ajar, courtesy lights, and factory stereo door speaker harness. Found on 1969 XR7's and 1969 Standard Cougar with Safety Convenience Package and Stereo option. This is a grade "B" good used harness, expect minor splices, damaged rubber boots or other easily repairable minor damage.

D0WB-13A769-A Right side door wiring harness that includes door ajar and courtesy lights. Found on 1970 XR7's and 1970 Standard Cougar with the Safety Convenience Package. D0WB-13A769-A is the tag number originally found on the harness. Wiring harness for door ajar and courtesy light. Master part number D0WY-13A769-A. This is a grade "B" good used harness, expect minor splices, damaged rubber boots or other easily repairable minor damage.

D1WB-13A769-BE Left side door wiring harness as found on 1971-72 Cougars with factory installed stereo. Wiring harness for factory door speakers only. Master part number D1WY-13A769-F. This is a grade "B" good used harness, expect minor splices, damaged rubber boots or other easily repairable minor damage.

D1WB-13A769-BE Right side door wiring harness as found on 1971-73 Cougars with factory installed stereo. Wiring harness for factory door speakers only. Master part number D1WY-13A769-A. This is a grade "A" premium grade harness that is not sun damaged, spliced or damaged in anyway. *Note - Excludes 1973 doors with power windows and or door ajar.

Used grade "A" harness, works for driver or passenger side, sold individually. Found on 1967 XR7's and 1967 Standard Cougar with Safety Convenience Package, console or dash mounted warning lights. C7WB-13A769-D is the tag number originally found on the harness. Wiring harness for door ajar and courtesy light. This is a grade "A" premium grade harness that is not sun damaged, spliced or damaged in anyway. Ford part number: C7WB-13A769-D

This green spring steel retainer fastens to the taillight mounting studs and keeps your plastic wiring harness clip in place. Six per vehicle, sold individually.

Used under dash wiring harness repair plug and pigtail to the ignition switch for the Mercury Cougar XR7. This is part of the 14401 main under dash wiring harness.

Used taillight wiring harness repair plug and pigtail to the passenger side (right hand) center taillight for the Mercury Cougar. This is part of the 13A449 main taillight wiring harness. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of...

This grade "A" taillight harness will be a rare uncut beauty with nice looking plug ends and wiring. This unit is for Mercury Cougars built prior to 1-3-67 with the stop lamp relay positioned next to the sequential unit in the trunk as opposed to under dash found on models made after 1-2-67. XR7 and Standard Cougars use the same rear wiring harness to the taillights. *NOTE* The stand out identifier of the early vs. late rear harness is the flat four prong plug with a red, two green and one...

This grade "B" taillight harness will have one or two professional repairs with unmelted plug ends. This unit is for Mercury Cougars built prior to 1-3-67 with the stop lamp relay positioned next to the sequential unit in the trunk as opposed to under dash found on models made after 1-2-67. XR7 and Standard Cougars use the same rear wiring harness to the taillights. *NOTE* The stand out identifier of the early vs. late rear harness is the flat four prong plug with a red, two green and one...

This grade "A" taillight wiring harness is a good used harness with no cuts or splices. Not for use with XR7 or Eliminator. The difference between XR7 and standard is that the XR7 has a two wire plug to the sending unit and the standard has a single wire.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There...

This grade "A" taillight harness is a good used harness with no cuts or splices. Not for use with XR7 or Eliminator models. The difference between XR7 and standard is that the XR7 has a two wire plug to the sending unit and the standard has a single wire.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There...

This grade "B" taillight wiring harness is a good used harness that may have one or two professional repairs and the plug ends will be nice and unmelted. Not for use with XR7 or Eliminator. The difference between XR7 and standard is that the XR7 has a two wire plug to the sending unit and the standard has a single wire.*NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is...

1968 XR7 and standard Cougars use the same rear wiring harness to the taillights. This is a grade "A" premium grade harness that is not sun damaged, spliced, or damaged in anyway. XR7 and Standard Cougars use the same rear wiring harness to the taillights, only the sub-harness that connects to it that runs along the underside of the package tray and down to the fuel sending unit differs XR7 vs. Standard. The major difference is that the xr7 utilizes a two wire plug and the Standard Cougar uses...

Used grade "A" taillight wiring harness for the Mercury Cougar XR7. This will be a rare uncut beauty with clean unmelted, non corroded plug ends. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential systems. There is no question he cannot answer! Here is a link to a great source of information on the subject. ...