Contact Us / Visit Us (click here)
CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is delivered by the post office and Canadian deliveries will be affected by the strike.
International Customers Click Here [Updated 6/2024]
 

Search This Category:
Select layout:
Products (Click sub-categories above to ONLY display results for that Sub-Category) 1-48 of 2516
$0 Price: $250.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 22564 -

Non working core suitable for rebuild, not full of water and never been opened. These are located in the quarter panel. This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can...

$0 Price: $160.88

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 15802 -

Please remove your regulator prior to shipping. Be careful of the mechanical energy stored with the spring under tension. Used rear pancake power window motor that is in good original condition for the Mercury Cougar or Ford Mustang. This motor has been professionally tested and has been found to be in good working order. Typically, these motors are service replacement motors that have been replaced sometime in the car's life.Ford part # C9WY-6530304-A.If you are interested in our service that...

$0 Price: $0.25

Buy Details

Availability: In-Stock Item
Item #: 31738 -

Hex head screw for attaching floor drain hole covers. Several different screws were used over the years and at different plants. All seem to be a #8 sheet metal screw of varying lengths. This is a #8 hex washer head tapping screw with 5/8" length. Two screws per drain cover, 2 or 4? per car, not sure. We also have the drain covers. 

$0 Price: $650.00

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 33838 -

Used tune up cabinet made by Motorcraft. Dealership mechanic shops used these cabinets back in the 70's, they were used to store various tune up tools and parts. A great piece of Ford nostalgia for the serious collector to add to their shop.  Local pick up preferred but we will ship, be prepared for the costs though! Measures 33" X 12" X 19.5" and weighs a little over 44 lbs.

$0 Price: $39.85

Buy Details

Availability: Out of Stock
Item #: 33063 -

NOS Ford service training manual on diagnosis of charging system problems. This booklet is a guide to diagnosis of the alternator, regulator, battery and wiring issues. It contains diagnostic procedures and self instructional tests and was meant to be used as a reference guide for the "charging system videotape (video tape not included).  16 pages long with tests and answers.Issued Dec. 1974, # 365-240

$0 Price: $38.25

Buy Details

Availability: Out of Stock
Item #: 26081 -

Reproduction 2 speed windshield wiper switch for the Mercury Cougar or Ford Mustang. These "off shore" units are spotty at best.Replaces Ford Part #: D1ZZ-17553 or D1ZZ-17553-A

$0 Price: $16.97

Buy Details

Availability: In-Stock Item
Item #: 11270 -

Nice reproduction oil dipstick made from all steel, painted Ford engine blue. Only fits 289 or 302 Ford engines from 1967-73. These dipstick tubes have the 'full' and 'add' markings in the correct place, however they do not have any Ford part numbers stamped on them. Black steel as shown, not plain shiny steel like originals. Replaces Ford part # C7OE-6750-B or C8OE-6750-B.

$1.40 Price: $1.64

Buy Details

Availability: In-Stock Item
Item #: 32390 -

3/8 washer for installation of idler, adjusting pulleys, and brackets, on some 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, 1-2 are typically used per car. 

$1.85 Price: $2.05

Buy Details

Availability: In-Stock Item
Item #: 32389 -

3/8-16x7/8 Bolt for installation of idler, adjusting pulleys, and brackets, on most 1968-73 Mercury Cougar and Ford anything, including Mustang. Sold individually, up to 8-9 are typically used per car. 9/16" hex, washer head bolt.

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26278 -

Reproduction 351 4V AT / MT Emission Decal for the 1971 Mercury Cougar / Ford Mustang

$24.00 Price: $33.25

Buy Details

Availability: In-Stock Item
Item #: 41288 -

Exact Copies Made From the Original Supplier to Ford Motor Co. U.S.A. Made. Ramp-Lok Features a Special Conical Washer Designed Specifically for Exhaust Manifolds.

$0 Price: $18.23

Buy Details

Availability: In-Stock Item
Item #: 41663 -

Cork Oil Pan Gasket for the 351 Cleveland Cork Oil Pan Gasket in the 1970, 1971, 1972 and 1973 Mercury Cougar or Ford Mustang.

$0 Price: $20.79

Buy Details

Availability: In-Stock Item
Item #: 41616 -

Cork valve cover gaskets for any 351C or 351 Cleveland Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $28.65

Buy Details

Availability: In-Stock Item
Item #: 41617 -

Rubber valve cover gaskets for any 351C Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $70.91

Buy Details

Availability: In-Stock Item
Item #: 10571 -

Concours correct Autolite spark plug wires for any 1971 Mercury Cougar Eliminator or Ford Mustang with 351C engines. Black wires with 'Autolite', 'radio resistance', cylinder numbers individually imprinted, and dated 2Q70 (second quarter 1970) on the 7mm wires. Orange spark plug boots on this set.

$0 Price: $5.95

Buy Details

Availability: In-Stock Item
Item #: 53245 -

Backup light switch retainer for Hurst shifters as installed on 1970-73 Mercury Cougar, Ford Mustang, and most vintage Ford cars with factory installed Hurst shifters.

$0 Price: $47.35

Buy Details

Availability: In-Stock Item
Item #: 11363 -

This is the reproduction bare metal oil pan for the 1971 Merucury Cougar and Ford Mustang equipt with the 429 big block. Does not include drain plug or a baffle.

$0 Price: $50.55

Buy Details

Availability: In-Stock Item
Item #: 11362 -

This is a reproduction bare metal oil pan with a baffle for the 1971 Mercury Cougar or Ford Mustang and a 429 big block. Includes the drain plug.

$40.00 Price: $68.18

Buy Details

Availability: In-Stock Item
Item #: 41958 -

These are the best CONCOURS radiator hoses on the market. Made in the U.S.A. by Gates or Goodyear both suppliers to Ford Motor Co. Features special white ink markings that have been designed to adhere to the hose under normal conditions, imprint will not come off even when in contact with antifreeze. All have imprints that are very crisp and authentic. Imprint is CONCOURS correct for the specific application year includes the Autolite logo. Hoses are also approved by Ford Motor Co. Replaces...

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26262 -

Reproduction 429 CJ AT / MT Emission Decal for the 1971 Mercury Cougar / Ford Mustang

$0 Price: $17.69

Buy Details

Availability: In-Stock Item
Item #: 41619 -

Cork valve cover gaskets for any 429 or 460 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $48.05

Buy Details

Availability: In-Stock Item
Item #: 15378 -

New rubber oil pan gasket for the 1971 Mercury Cougar or Ford Mustang when equipped with the 429ci engine. Rubber/Steel Core, 3/32" thick.

$0 Price: $23.52

Buy Details

Availability: In-Stock Item
Item #: 41618 -

Rubber valve cover gaskets for any 429 or 460 Ford engine. Sold in pairs, works well with either stamped steel or cast aluminum valve covers.

$0 Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30961 -

Reproduction driver side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

$0 Price: $183.15

Buy Details

Availability: Ships Direct from Supplier (Except International)
Item #: 30960 -

Reproduction passenger side inner A pillar / kick panel for the 1971 - 1973 Cougar or Mustang.

$0 Price: $8.25

Buy Details

Availability: In-Stock Item
Item #: 26384 -

This is a reproduction of the A/C compressor charge decal for the Mercury Cougar or Ford Mustang.Replaces part # D1OA-19A688-A.

$0 Price: $7.35

Buy Details

Availability: In-Stock Item
Item #: 26375 -

Here is our A/C dryer decal for your Coug or Stang equipped with A/C. Replaces Ford part #: D0AA-19959-C3.

$0 Price: $109.85

Buy Details

Availability: In-Stock Item
Item #: 11-0471 -

Air conditioning fan blower BARE clam shell assembly for any 1971-73 Mercury Cougar or Ford Mustang with factory A/C. Assembly comes as shown: fiberglass two piece housing, flapper door, and a couple of clips to hold it together. Grade B used will have a minor stress crack, and or small chips. The holes for attaching duct work also may have one hole blown out. See Grade A for a better condition version.

$0 Price: $65.85

Buy Details

Availability: In-Stock Item
Item #: 11-0474 -

Air conditioning fan blower BARE clam shell assembly for any 1971-73 Mercury Cougar or Ford Mustang with factory A/C. Assembly comes as shown: fiberglass two piece housing, flapper door, and a couple of clips to hold it together. Grade B used will have a minor stress crack, and or small chips. The holes for attaching duct work also may have one hole blown out. See Grade A for a better condition version.

$0 Price: $148.86

Buy Details

Availability: In-Stock Item
Item #: 11-0387 -

Air conditioning fan blower assembly for any 1971-73 Mercury Cougar or Ford Mustang with factory A/C. We offer this assembly to go along with the reproduction heater box with air conditioning. Assembly comes as shown: fiberglass housing, fan motor, fan motor mounting plate, fan wheel, fan motor resistor, and the one attached vacuum actuating valve. All components tested and working, housing used and may have a chip or small crack from 5 decades of use.

$0 Price: $85.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20529 -

Tecumseh compressor for air conditioning systems for Mercury Cougars and Ford Mustangs. These should be professionally inspected or rebuilt and our compressors have all been in storage for some time. These Tecumseh compressors came with a front oil fill plug up until 1967, thereafter, they have a top fill plug. Top fill is the most common, and likely what you will receive, unless you specify the 1967 style with front fill. These units are shipped without pulleys, clutches, or valves. The...

$0 Price: $85.37

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 20530 -

York compressor for air conditioning systems for Mercury Cougar and Ford Mustang. These should be professionally inspected or rebuilt and our compressors have all been in storage for some time. Shipped without pulleys, clutches, or valves. The York compressor is constructed mostly of aluminum and is lighter than the Tecumseh brand compressor by 10 pounds. The York compressors are less common too, subject to availability. We often see part numbers on the York tag (which does not list a Ford...

$0 Price: $441.55

Buy Details

Availability: In-Stock Item
Item #: 33261 -

New manufactured air conditioning condenser for any 1971-73 Mercury Cougar or Ford Mustang. Condenser only, you will need to re-use or purchase a new dryer and possibly other components. 

$0 Price: $28.89

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0087 -

Used air conditioning connecting duct or manifold. This plastic manifold mounts behind the center dash vent. Ford calls it a 'duct and connecting assembly' or 'A/C junction'. Grade 'A' condition, ships without cracks, splits, or broken tabs. Original factory or 'integral' air conditioning part.Ford part number D1ZZ-19C932-A.

$0 Price: $254.25

Buy Details

Availability: Discontinued, Limited Stock on Hand
Item #: 15774 -

Reproduction A/C evaporator for your Mercury Cougar or Ford Mustang.*Note - We have had numerous customers complain that these don't fit exactly like the originals.As far as evaporators go, we highly suggest going with a good used evaporator over these new versions. What happens is this: These companies use more coils (35% more passes) which equals out to thinner metal, which also equals out to performance that's sub-par to a good used original evaporator.Click on images to enlarge. ...

$0 Price: $149.85

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0065 -

Used air conditioning evaporator core for 1971-73. We only sell used coils that are clean and sealed and do not sell coils that have pest damage or have corrosion from a leaking heater core. Even though we stand behind these used units for 30 days, we still suggest that you pressure test them before installing as we all know what kind of labor is required to install one of these. 1971-73 evaporators have 2 male fillings, and the whole unit is made of aluminum, including the tubes.Ford part #...

$0 Price: $52.65

Buy Details

Availability: In-Stock Item
Item #: 41783 -

Exact replacement to original drier that removes moisture and should be changed anytime system is recharged. It really is the life of your system. This stainless steel filter element stops contaminants from clogging the expansion valve.

$0 Price: $106.97

Buy Details

Availability: Out of Stock
Item #: 41914 -

High quality and correct looking air conditioning discharge hose for Mercury Cougars or Ford Mustangs. This hose is compatible with both 134a and R12 refrigerants.

$0 Price: $165.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25384 -

Regardless of which V-8 engine, D1ZA-19972-AA or D1ZA-19972-AB part number. This hose is approximately 24 inches long. These used hoses probably still hold pressure, we suggest a purchase of new 'O' rings prior to installation.

$0 Price: $39.87

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 11-0462 -

For Mercury Cougar and Ford Mustangs with integral or factory installed air conditioning with any V-8 engine. Original condensation drain hose from the A/C case, through the floor board, to the ground. Correct "S" shaped moulded hose with restrictor intact. Almost the same hose as was used 1969-70, Dearborn assembly line hoses have a ribbed section 1971-73. The 1969-70 versions, typically have the alligator texture on the outside of the hose.  Ford part # C9ZZ-19858. ...

$0 Price: $193.86

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 25383 -

Regardless of which V-8 engine, D1ZA-19867-BC part number. This hose is approximately 49 inches long.

$0 Price: $359.78

Buy Details

Availability: Used / Wrecking Yard Item
Item #: 24426 -

This is actually a kit which includes 2 hoses (Part # D1ZA-19835-A and Part # D1ZA-19837-A), the sight glass (Part # SG3, D2AZ-19D695-BK or YF-342), 2 o-rings (Part # L33,D2AZ-19D695-R or YF-368 and Part # H33, D2AZ-19D695-AE or YF-316) and a quick connect (Part # QF3,C1SZ-19B696-A or YF-241 and Part # QM6, C1SZ-19B695-A or YF-252). *Note we normally supply the new coupler with this kit. Regardless of which V-8 engine, this hose when assembled is approximately 78 inches long.Ford MPC kit #...