All Available Parts - 1967 Mercury Cougar

Used wiring pigtail that runs from the under hood harness to the alternator harness on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the horn / voltage regulator / starter solenoid on the 67 - 68 Standard and XR7 model Cougars. Located above the driver side kick panel behind the heater controls. 

Used wiring pigtail that runs from the under hood harness to the voltage regulator ground bolt on the 67-68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the starter solenoid on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the ignition switch on the 67 - 68 Standard and XR7 model Cougars.

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the alternator harness on the 67 - 68 Standard and XR7 model Cougars.

Used wiring harness that runs from the taillight harness to the emergency relay on the 67 - 68 Standard and XR7 model Cougars. 

Used wiring pigtail that runs from the under hood harness to the small post on the starter side of the starter relay on the 67 - 68 Standard and XR7 model Cougars. 

Used wiring pigtail that runs from the under hood harness to the voltage regulator from the alternator harness on the 67 - 68 Standard model Cougars.

There are three of these small rings on your cluster that outline the amp, temperature and fuel gauges. The oil pressure gauge is unique in that the decorative black ring is incorporated into the gauge housing.Sold individually, three per car.

There are two of these rings on the driver side cluster. One outlines the tachometer and one outlines the speedometer. Sold individually, two per car.

These emblems can be used anywhere from your toolbox, to the dash or trunk and anywhere in between. Makes a great accent to other fender emblems or door panels. Peel and stick.Sold as a pair.

Used one year only column mounted switch for activating the tilt column.Ford part number C7ZZ-13713-A

NOS one year only column mounted switch for activating the tilt column. Ford part number C7ZZ-13713-A

Set of three plastic spacers to replace your original brittle cracked parts. These are much stronger than OEM.

This often times missing bracket was attached to the back of your 67 - 68 XR7 model passenger side plastic bezel via plastic studs that easily break off from over tightening the screw. This is the smaller design. Two different sized brackets used, this is the smaller one that is 1-21/32 inches wide. This bracket goes in the corner above the switch panel. The larger bracket is 1-3/4" or 3/32" wider. It was obvious what the original intent was on this design in that a tab on the L...

Used retaining bolt with nut for the fixed column on any 67 - 68 Cougar or Mustang. 2 of these bolts are required to holt the two sections of the upper column sleeves together.  Sold individually, 2 per column.

This listing is for the outer doors pieces only, Cougar and Mustang are identical. Sold only as a pair.Replaces Ford part numbers C7ZZ-6521453-A  and  C7ZZ-6521452-A

Used original Golde sunroof gear box. This box is found above the headliner on the passenger side.Golde part number 0142850 00

Used mounting bracket for the sunroof motor on the 67 - 70 Mercury Cougar. This bracket is only used with the 67 - 70 power sunroof motor.

The car pictured is a 67, but the copyright says "1969 Fred Bonner Corporation" and the header says Mercury Cougar introduced 1968.Measures 5"x7"

Quick reference guide for all the common specs on all models for 1967. Printed November 1966 L-M 9937-67Measures 4"x6"

NOS turn signal wand. One year only unique design. The superseded service replacement part # D1VY-13305A Is what most cars have installed in their 1967. Very few of these exist today as they were only made one year. This is the early 1967 turn signal stalk with cruise or speed control. Likely manufactured by Curtiss-Wright.Ford Part number C7ZZ-13305-B2Statistics:1967 Mustang - 55 total cars with speed control option. 17 coupes, 20 fastbacks, 18 convertibles.1967 Mercury Cougars -...

Used turn signal wand. One year only unique design. The superseded service replacement part # D1VY-13305A Is what most cars have installed in their 1967. Very few of these exist today as they were only made one year. This is the early 1967 turn signal stalk with cruise or speed control. Likely manufactured by Curtiss-Wright.Ford Part number C7ZZ-13305-B2Statistics:1967 Mustang - 55 total cars with speed control option. 17 coupes, 20 fastbacks, 18 convertibles.1967 Mercury...

NOS Rand McNally Lincoln Mercury atlas and travel guide, originally distributed to customers through their local dealer. Includes state, city and "special maps" that include the US, Central America, Mexico and Puerto Rico. Also includes a special features section with points of interest.

Used spiral bound Rotunda oil and lubrication guide book for 1967 Lincoln Ford Mercury vehicles, including Ford trucks, Econoline vans, Thunderbird, Falcon, Fairlane and Bronco of the same year. Included information on oiling and lubricating everything from the the chassis to the engine and cooling system. Volume 67 PS 5L8  

NOS pamphlet from the Ford Motor Company detailing the 24 month 24,000 mile, or 5 year 50,000 mile warranties for the line of 1967 Cars and light trucks including Falcon, Mustang, Cougar, Ranchero, Fairlane, Thunderbird, Bronco, Light Trucks, Comet, Continental and Econoline.Volume 67C16L6

NOS Autolite 4300 training handbook. Filled with details pertaining to operation, adjustments, overhaul and servicing of the Autolite 4300 carburetor which was used starting in 1967.  Volume 67 S2 L2, 9503.1, 9503.2

Used original dealer upholstery and interior options catalog for the 1967 Cougar, Monterey, Brougham, Marquis, Montclair, Colony Park, Commuter, S-55 and Park Lane. These catalogs were customized to each dealership so there might be a few variations out there, but it's filled with tons of information on interior upholstery, carpet and roof coverings. Complete with inner flip out mini catalogs featuring colors and swatches.   These books are very rare and hard to come by and would be...

NOS C6 Automatic Transmission training handbook from the Ford Marketing Corporation. Course 7521, Vol. 71 S4-L2. Everything from the torque converter, to the planetary gear and hydraulic systems to diagnosis and adjustments are detailed in this manual. Everything about descriptions, testing procedures and specifications were approved by Ford. Filled with color photos and diagrams. There is an unknown name written on the inside of the cover, however all pages are intact and in perfect...

Used grade A condition High Performance magazine, vol. 9 no. 10 from 1966. Featuring a cover photo of with 1967 Cougar and an article by Ron Loden on "How to sharpen your cats claws", this issue is filled with info dealing with the 390 engine. Definitely a collectors item, it's virtually untouched and in amazing condition and for being 57 years old! These magazines are not only great to read through, but even more fun to check out all the ads from back in the day (including an...

NOS 41" x 24" Walking Cat nylon banner / flag. These were hung up around dealers back in the sixties and early seventies. We're calling it a banner, but the 2 holes on one side of it indicates it may also be a flag.   NOTE* The reflectiveness of the nylon made it a bit difficult to photograph, just know that the banner is in fact white! This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually...

Custom made Walking Cat belt buckle for the Cougar die hard. This would make a great gift for anyone who lives and breathes everything Cougar. The buckle is bare, unpainted and ready for you to customize how you see fit. We're not sure how we ended up with this awesome collectable, but it's definitely one of a kind and the only one we know of, so when it's gone it's gone!  Measures 3 3/8" x 2 1/4"

NOS 1967 Mercury "Year of Promise" dealer sales strategy booklet. As noted on the front, "much of the material in this booklet is confidential and not to be discussed outside the dealership". This book is filled with information for dealers on how to get customers in the showroom, land them a car and hold the Cougar buyers with the Cougar order holding program. We've never seen another one of these booklets before, and this one is on perfect condition.Issue No. 161  ...

Used one year only door jamb mounted switch for activating the tilt column.

Final issue / November 1975This manual was taken from the original box and each page was painstakingly placed in a Mylar sleeve. No damaged, missing pages or writing on pages. Anyone serious about buying and selling parts for a 1965 1966 1967 1968 1969 1970 1971 1972 Comet / Cyclone / Cougar / Mark III will find this all inclusive manual will quickly pay for itself. If you pick it up in person we can reduce the price significantly, we can store it for as long as you need until you can pack it...

NOS 1967 Mercury dealer service department vinyl roof repair and replacement procedures manual. The purpose of this book was to acquaint dealer service personnel with new methods and procedures of repairing and replacing vinyl tops, making it easier to repair tops in house rather than transport the vehicle to outside sources. Includes info on all versions of pony, intermediate and full sized Mercury vehicles.  79 pages Issue number LM-7843, distributed in April 1967

NOS Car Life Magazine Volume 13, No. 9 from October 1966. Kept in a plastic sleeve for it's entire life, this issue is in immaculate condition. The front cover is graced by a beautiful red 1967 Cougar and the article on page 38 titled "A Cat Called Cougar" dives deep into the secret plan of the Lincoln-Mercury personnel to unleash the Mercury Cougar on the automotive world. It also details specs such as 15% better ride over the Mustang and it's "radical innovations" that were...

NOS Ford service training manual on diagnosis of charging system problems. This booklet is a guide to diagnosis of the alternator, regulator, battery and wiring issues. It contains diagnostic procedures and self instructional tests and was meant to be used as a reference guide for the "charging system videotape (video tape not included).  16 pages long with tests and answers.Issued Dec. 1974, # 365-240

NOS 12 page Service Department Important Warranty Facts brochure. These pamphlets were handed out at dealership to anyone who bought a Lincoln Mercury vehicle. It details everything you should know about basic, power train, steering, suspension and wheel warranties and explains exactly what was and wasn't covered by the dealership.  Issued in January 1967 LM-7664

This big book measures 18" x 13" x 3" and weighs 7 pounds. It's a must have if you are serious about electrical work on the Cougar, Thunderbird, Mark III, Montego, Fairlane, Maverick, Cyclone, Bronco, F100, Torino, Mustang or other Ford products products from 1967. Condition is used and will have a few pages that have torn away from the rings. Form 7795P-70Vol. 67 S3Course 13001.1 

Used condition Cartoons Magazine. These fun periodicals were filled will funny anecdotes and ridiculous cartoons from back in the day. The front cover features a 67 Cougar being built into a "funny car". Issued April 1967

Motor Trend Magazine, August 1966 issue. Featuring 1967 cars, road tests, Indy 500 / World 600 / Monaco articles. Includes sections on Cougar, Fairlane, Galaxie, Mustang, Maquis, Panther and Thunderbird. And of course, all the usual fun and eye catching classic ads common in early year magazines. Condition is used.

Motor Trend Magazine October 1966 issue featuring the 1967 Cougar, Mustang and Camaro. This issue also has a nice little article on the geteway cars of the mid to late 1920's - 1930's and includes a "thank you" letter from John Dillinger to Henry Ford. And of course, all the usual fun and eye catching classic ads common in early year magazines. Condition is used. List of topics in this issue are: First driving reportsPhotos and complete technical details of the Cougar...

Car Craft Magazine, August 1967 Quickest Cat in Cougar Country issue. Features a 4 page article on the 1967 Mercury Cougar. Previous owner may have tried to use the centerfold for a poster, a few of the pages have been pulled away from the staples. These old magazines are just plain fun to read, and of course, all the usual fun and eye catching classic ads common in early year magazines. Condition is moderately used. Articles in this issue: Snow white and the seven dwarfs NHRA'sCar...

Used highly collectible Dan Gurney slot car racing track made by the Republic Tool and Manufacturing Corporation in Los Angeles California. Open box and lightly used. Both cars are intact, and the decals have been placed on the the vehicles and the track. Everything is good condition, but the cars have not been tested and the red car has had it's wheels painted. Other than that, this is a rare and truly great find. Features the Mercury Cougar Logo on front of the box.

Rebuilt C4 24 spline torque converter for the 1967 - 68 Mercury Cougar or 1966 - 69 Ford Mustang. This item carries a $200 core charge, refundable when we receive your rebuildable core. Ford part number C6AZ-7902-M. What does it mean to “rebuild” a torque converter? When there are problems with a car’s automatic transmission, sometimes it’s the torque converter. It could be fluid loss, bent vanes, or bad bearings among other problems. We have a local shop with decades of...

Rebuilt C6 FE Engine torque converter for the 1967 - 70 Mercury Cougar and 1966-70 Ford and Mustang. 31 splines and 1.848" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. 1966-70 Ford FE engines include: 352, 360, 390, 427, 428, etc. Ford part number C8OZ-7902-A. What does it mean to “rebuild” a torque converter? When there are problems with a car’s automatic transmission, sometimes it’s the torque converter. It...

New Old Stock. This part is located in the right front corner of the panel and has to be rotated inward to remove it from the guide rail so the panel cannot be removed. Imprinted on the plastic portion of the part is a Golde part number 100 414 645. Ford part number C8WY-65502L08-A

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

This marketing poster came from the C. Gayle Warnock collection which was liquidated on Ebay after his passing in 2007. Mr. Warnock was a Public Relations Executive for the Ford Motor Company, retiring in 1976. These NOS posters are the only known survivors.Measures 39" x 24"All edges are slightly worn from shelf life.

Used custom cut driver side roof section of the drip rail for the 67-68 Cougar. This listing is for anyone who has rust on the rail section of the roof and needs a cut from a good donor car for a patch panel. Generously cut approximately 4 inches deep, from the "A" pillar all the way to the rear portion of the quarter. Ford part number C7WY-6551701-B

Used custom cut passenger side roof section of the drip rail for the 67-68 Cougar. This listing is for anyone who has rust on the rail section of the roof and needs a cut from a good donor car for a patch panel. Generously cut approximately 4 inches deep, from the "A" pillar all the way to the rear portion of the quarter. Ford part number C7WY-6551700-B

This 1967 Cougar gauge cluster hardware kit is helpful when trying to reassemble a driver side gauge cluster that has been reassembled previously with the wrong fasteners or some of the items are missing. Includes all items shown. The only difference between 1967 and 1968 is that the 1967 has a smaller hole in the speedometer lens for the trip odometer button.

This 1967 - 1968 Cougar gauge cluster hardware kit is helpful when trying to reassemble a driver side gauge cluster that has been reassembled previously with the wrong fasteners or some of the items are missing. Includes all items shown. The only difference between 1967 and 1968 is that the 1968 has a larger hole in the speedometer lens for the trip odometer button.

These nuts and little red insulators are needed when installing the factory Amp gauge. Sold as a pair (2 nuts and 2 insulators). 

These were used to mount the Fuel, Temp and Oil gauges on both Standard and XR7 models 1967-73. Mustang too, made from a paper or cardboard material. Plastic version for the ammeter. Ford part number 10C914. 

Motor Trend Magazine, February 1967 issue. Featuring an article on "The 9 Lives of Cougar" with details and photos from the very first concept design and how it changed and took shape to become the Cougar we all know and love. There's also a fun little insert about the "Secrets of A Car Thief" in which convicted car thieves are interviewed in a California Correctional Institution. And of course, all the usual fun and eye catching classic ads common in early year magazines. Condition...

These right and left bezels would be considered grade A cores with no cracks or chips. Often there is a missing mounting stud or two on the backside but nothing that shows. The cluster is complete and all the gauges work. If you would prefer a clock over a dummy plate we can upgrade you at no charge but the clock will not work and often will be missing the tiny knob. If you let us know what mileage you would like the odometer to read let us know and we will try and accommodate. ...

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

Very in-depth 57-page book from Ford on the sequential and emergency flasher system in the 1967 Cougar. Free download! To download the high resolution version (20 MB) of this manual, add it to your cart and you will receive a link to download this manual at checkout. *NOTE* Need help diagnosing a Cougar turn signal problem? Victor Yarberry is the world’s most knowledgeable expert on the subject. Vic has owned Cougars since the 1970's and is the designer of all of our solid state sequential...

Used Speed Kings Matchbox K-21 king size Cougar dragster. This pink 67 Cougar measures 3-3/4" and is definitely a larger size Matchbox car compared to the smaller versions that measure just over a few inches. Appears to be in great shape and comes with original box. One thing we noticed right off the bat is that there's minor scuffing on the roof from being taken out and put back in the tight fitting package. Body stickers are decent and wheels still have good chrome. great addition for...

Used Matchbox K-21 king size Mercury Cougar. This gold with red interior 67 Cougar measures 3-7/8" and is definitely a larger size Matchbox car compared to the smaller versions that measure just over a few inches. From what we can gather, there were two versions of this car...one with white interior and this version with the red interior. Appears to be in great shape other than the fact that the doors sag a bit if not closed tight, and the rear window seems to have a manufacture...

Driver side bracket that fits onto the rear radio bracket assembly on the 67 - 68 Cougar or Mustang equipped with a console. The bracket assembly is 3 separate pieces, this is for the driver side bracket only.

Passenger side bracket that fits onto the rear radio bracket assembly on the 67 - 68 Cougar or Mustang equipped with a console. The bracket assembly is 3 separate pieces, this is for the passenger side bracket only.

This icon means that we're looking to buy this part!WCCC is a buyer of used and NOS hard to find 67-73 Mercury Cougar parts. Usually we give an in store credit of 50% of our web price for parts delivered in hand or by carrier to our Brooks, Oregon location. If you're not interested in store credit, just shoot us an email and we will let you know if it's is something we can pay cash for. We do not send cash for parts in advance but we often can compensate you within hours of receiving the...

We all love the look of classic sealed beam headlights, but the dim halogen light output makes nighttime driving potentially risky for you and your beloved classic. Holley's new RetroBright LED Modern White Headlights offer a number of advantages over traditional sealed beam headlights such as plug and play compatibility, better visibility, and 6 times longer life. Not only that, but because they are LED they take up less space, create far less heat, and use less power than other headlights....

The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is designed to work with the Sniper Ecosystem that includes Hyperspark ignition, complete fuel systems, multiple...

This plate is what is located on the backside of your door jam where your striker threads in one. Two threaded holes for attaching the striker plates on any 1967-70 Mercury Cougar or Ford Mustang. Right and left are the same. 

This listing is for a Walking Cat keychain multi tool. We haven't been able to find much information on this, but it's definitely a cool item to add to your collection. Features a chrome plated swing out tool with a few flathead tips and nub-style phillips tips. 

This listing is for a 7"x4" 3D (prismatic) Mercury Cougar Dealership Promotional Card. These were handed out to customers and they featured a special offer from the Cougar Model Car Headquarters in Detroit Michigan, sending them 75 cents got you a Cougar Miniature model!

Ready to move into the Cougar big time? Well now's your chance with this flashy gold plated money clip emblazoned with the XR7-G shifter emblem. A great item to add to your collection of memorabilia, or to actually use! We're not sure of it's exact origin, but we though we'd pass on the opportunity for someone to get their hands on it. Circular center measures 1-1/2" across.

Ready to move into the Cougar big time? Well now's your chance with this flashy stainless steel money clip emblazoned with a gold XR7-G shifter style emblem. A great item to add to your collection of memorabilia, or to actually use! We're not sure of it's exact origin, but we though we'd pass on the opportunity for someone to get their hands on it. Old dirty carry bag included. Measures 2" x 1" Emblem measures 1-1/4" x 1/2"

Reproduction jack and tool bag for the trunk area of your Cougar or Mustang. Made in the same plaid style as the trunk mat on the outside, and a white soft liner on the inside. Measures 16 1/2" x 8 1/2"

This listing is for the person who needs a little more leg room when behind the wheel. If your knee is pushing on your turn signal lever, or if your belly is hitting your steering wheel, this is the item for you. Very easy to install, bolts right up to your existing seat tracks. You can expect about a 1/4" height difference. Sold as a pair, enough to do one seat. Check out this video

Factory sealed NOS Cougar II "Those Famous Fords" #103 1/25 scale replica model kit from the Testors Corporation in Rockford Illinois.  When the Cougar II was first shown in 1964, the press thought it was Ford's answer to the Stingray. In reality it was a teaser to get folks excited for the release of the actual Mercury Cougar which ended up looking nothing like the Cougar II concept car. Box is slightly crushed in on one corner, but shouldn't effect the contents. ...

Reproduction 7-blade fan, fan clutch, fan to clutch bolt kit, and water pump to clutch bolt kit for the 67 - 70 Cougar and Mustang. This kit can  be used to upgrade any 67-70 Cougar/Mustang small block that already has a 24" radiator to the big block cooling fans. Also keep in mind our 1968-1970 big block clutch fans will fit a multitude of Ford products throughout the 1960's and 1970's, including but not limited to Galaxy, LTD, Ranchero, Marquis, Parklane, Cyclone,...

Rebuilt small block C6 Ford transmission torque converter for the 1971-73 Mercury Cougar and Ford and Mustang. 31 splines and 1.375" Pilot diameter. This item carries a $200 core charge, refundable when we receive your rebuildable core. Fits small block C6 transmissions, typical for 351C engines and others when equipped with "U" code transmission and H, or M code engines 1971-73. Has 11.5 inch circle diameter for the flex plate studs, Ford part number D1AZ-7902-A....

NOS 4 foot by 3 foot giant dealership poster advertising the new 1967 Mercury Cougar "Powered by the same V8 dependability that won the Indy 500 3 years running". These posters were not made for the general public, they were hung up in dealerships across the country. We were lucky enough to get our hands on one, so we're passing on the possibility of owning it to one of you lucky Cougar owners. It's been folded for 57 years, but we had to open it up to take a photo for you and...

Reproduction tooth backed washer for the bumper bracket to frame rail bolt on the 67-68 Cougar or Mustang. 

This is the base model Sniper II kit, does not include Power Distribution module or any other options.  The #1 EFI conversion system just got better! Introducing Sniper 2 EFI - a self-tuning, easy-to-install, EFI conversion for common 4-barrel (4150 flange) style carburetors. Holley took everything that they learned from the original Sniper EFI system and added 14 new features that will make your EFI conversion more simple, reliable, and modern. Like all Sniper EFI systems, Sniper 2 is...

Reproduction gauge lens set for the 67-68 STANDARD Cougar. Includes Speedometer Lens, Temp/Amps/Oil/Fuel Lens and Clock Lens. 

Speedometer lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. Almost the same as the Tachometer lens retainer, tachometer version has a clipped section shaped like a thumb nail on the edge. Ford called these retainers a 'mask'. Stamped C7WF-10894-S or C8WF-10894-S. Also C7WY-10890- NOTE: The speedometer retainer is different from the tach retainer, the tach retainer is...

Tachometer lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. Almost the same as the speedometer lens retainer, tachometer version has a clipped section shaped like a thumb nail on the edge. Stamped C7WF-10894-S or C8WF-10894-S. Also C7WY-10890 NOTE: The tachometer retainer is different from the speedometer retainer, the tach retainer is notched for the screw post...

Amps / Fuel gauge lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. There are 3 total retainers needed per bezel, two of this style and one for the temp gauge (they are notched for different placements). Ford called these retainers a 'mask'.Ford part number C7WY-10890- Sold individually, 2 required. NOTE: The amps / fuel gauge retainers have white painted tops,...

Temp gauge lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. There are 3 total retainers needed per bezel, 1 of this style and 2 for the amp and fuel gauges (they are notched for different placements). Ford called these retainers a 'mask'.Ford part number C7WY-10890- NOTE: The temp gauge retainer is painted all black, the amp / fuel gauge retainers have a white...

Complete used gauge lens retainer set. Used on the inside of the cluster bezel to shield the face of the gauges. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. Ford called these a 'mask'.Ford part number C7WY-10890-

Reproduction gauge lens set for the 67 XR7 Cougar. Includes Lenses for Speedometer, Tach, Amps/Volts, Temp and Oil gauges. Because some cars have had the Amp gauge converted to a Volt gauge, this kit will include both lenses. 

Speedometer lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Fits any 1967-68 Standard Model Mercury Cougar. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. There are 3 total different retainers needed per standard instrument cluster. Ford called these retainers a 'mask'. Ford part number C7WY-10890-

TEMP / FUEL lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Fits any 1967-68 Standard Model Mercury Cougar. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. This one has a small crescent shaped notch in the rim to fit into the cluster bezel. There are 3 total different retainers needed per standard instrument cluster. Ford called these retainers a 'mask'. Ford part number C7WY-10890- ...

Clock and dummy lens retainer used on the inside of the cluster bezel to shield the face of the gauge. Fits any 1967-68 Standard Model Mercury Cougar. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. There are 3 total different retainers needed per standard instrument cluster. Ford called these retainers a 'mask'. Ford part number C7WY-10890-

TEMP / FUEL lens retainer, Speedometer lens retainer, and clock retainer - used on the inside of the cluster bezel to shield the face of the gauge. Fits any 1967-68 Standard Model Mercury Cougar. Will show a minor amount of wear or rust, plan on cleaning it up and possibly repainting. There are 3 total different retainers needed per standard instrument cluster. Ford called these retainers a 'mask'. Ford part number C7WY-10890-

Used tune up cabinet made by Motorcraft. Dealership mechanic shops used these cabinets back in the 70's, they were used to store various tune up tools and parts. A great piece of Ford nostalgia for the serious collector to add to their shop.  Local pick up preferred but we will ship, be prepared for the costs though! Measures 33" X 12" X 19.5" and weighs a little over 44 lbs.

No cracks or pits, very nice condition. Used only on the 1967 Cougar standard console with automatic transmission, but can easily be cut to accept the four speed insert.

You can trim the automatic version of this part and use it in conjunction with the four speed insert.

Usually ships in 3-5 business days. Supplier is backordered on this product. Items may not ship until Feb 2023. This is a reproduction of the automatic transmission console for a 1967 Mustang but it also works on a 1968 Mustang. With the the addition of the two pads (Radio Pad and the Lower Pad: 1967 or 1968) it easily becomes a 1967 Cougar or 1968 Cougar console. ...

Usually ships in 3-5 business days. This is a 3 or 4 speed console for a 1967 Mustang but with the the addition of the two pads it easily becomes a Cougar console. Although not visually correct, it will work just as well in a 1968 Mustang or Cougar. Click on images to enlarge. This console does not include the rear radio to console three piece bracket or the windlace that fits between lower dash and console base. The pictures here show the biggest downfall of this console. Right out of the box...

Pictured here is a representation of the console you can expect to get from us. Notice this is not a restored console, but rather a compilation made from several units taken out of parts cars to make one good example. As with the console shown here, it will not be perfect. If you would like to know where the blemish's are on the console you will receive, please contact us for details. Do know we understand how delicate they are and make every effort to ensure it is packaged properly. We do...

Knob is exact replacement, element is a generic replacement. Socket and element are manufactured by the same company to insure fit. Exact replacement for 1967-68 dash or 1969-70 under dash lighter and lighter socket. Replaces Ford part # C7ZZ-15052 and C6ZZ-15055-B.*Note - Retainer should have a ground lug on it in order to work with 1969 console cigar or cigarette lighters.