Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Door Edge Guard Kit - NOS ~ 1969 - 1970 Mercury Cougar

1969 Mercury Cougar
1970 Mercury Cougar

Item #: 32700

Price: $189.85

Cost: 15188

Earns: 760

Bonus: 73

Availability

Out of Stock - Ships: Unknown

Applications

1969 Mercury Cougar
1970 Mercury Cougar

Description

NOS, new old stock, Stainless steel clip on guards for the rear edge of the 1969 and 1970 Cougar doors. Would have been part of the exterior decore option. Self attaching, no adhesive or screws needed. Specifically contoured to the Cougar door edge.

Ford part number C9WY-6520910-A.

Specifications:

Shipping Weight: 1.00 LBS

(weight shown may be the dimensional weight)

0 Reviews ( of 5 Rating)

No Reviews Found, be the first to review this product.

Write a review!

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 41893 [More info]
[More info] Hose - PCV to Transfer Tube - Big Block - Repro ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Connects PCV valve to PCV transfer tube on the 390, 427-4V, and 428CJ. Inside diameter on one end is .45" the other end is .58". These should be tough to get on so that they will form a vacuum seal. Originally held...

Buy

$29.05
Frequently
Purchased With

Item #: 33356 [More info]
[More info] Scissor Jack - Fine Thread - Grade A - Used ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang
Good grade A used jack with correct fine threads. The most common jack as identified by the fine threads. This version was made by several suppliers, and may have slight variations from the picture. Some have...

Buy

$199.89
Frequently
Purchased With

Item #: 30766 [More info]
[More info] Hose and Clamp Kit - Brake Booster - Date Coded - 2/18/69 - PREMIUM - Repro ~ 1969 Mercury Cougar / 1969 Ford Mustang
Reproduction hose and clamp kit for the brake booster on your 1969 Cougar or MustangDate code: 2/18/69

Buy

$16.45
Frequently
Purchased With

Item #: 11813 [More info]
[More info] Carburetor Spacer Plate - Gasket - 390-4V - 428CJ Manifold - Spacer 4BBL - Repro ~ 1969 Mercury Cougar - 1969 Ford Mustang
New carburetor spacer plate gasket for all 1969 Mercury Cougar or Ford Mustang with S code 390-4V or 390IP original Autolite Carburetors. Additionally it fits all Ford installed Holley carburetors. This is the...

Buy

$3.04
Frequently
Purchased With

Item #: 24524 [More info]
[More info] Mounting Bolt - Spare Tire - Hold Down Mount - Hook Type J-Bolt - Used ~ 1969 Mercury Cougar / 1969 Ford Mustang
For all 1969 Mercury Cougar trunks. The MPC lists the correct length as 8-3/4 inches in total length, with 4 inches of the end being threaded but we have found without fail them to be about 10 3/4" with about 3" of...

Buy

$22.85
Frequently
Purchased With

Item #: 14-0110 [More info]
[More info] Seat Belt Buckle Bezel - Used ~ 1968 - 1972 Mercury Cougar / 1968 - 1972 Ford Mustang
Used seat belt buckle bezel for the Mercury Cougar, Ford Mustang, or Ford Torino. This is the outer portion of the two piece seat belt buckle cover. This is a good replacement part if you want to keep your car...

Buy

$14.85
Frequently
Purchased With

Item #: 14020 [More info]
[More info] Wire Assembly - Dash to Engine Gauge Feed - 390 / 428CJ / SCJ - Repro ~ 1969 - 1970 Mercury Cougar / 1969 - 1970 Ford Mustang
Big Block FE 390 or 428 engine feed harness that fits the 1969 or 1970 Mercury Cougar and Ford Mustang. Replaces Ford Part #: C9ZZ-14289-B and D0AZ-14289-A.Check out the video below on our new gauge tester: ...

Buy

$27.85
Frequently
Purchased With

Item #: 14-0021 [More info]
[More info] Plastic Face Plate - Seat Belt Buckle Cover - COLORED - EACH - Used ~ 1968 - 1972 Mercury Cougar / 1968 - 1972 Ford Mustang
When placing your order, be sure to leave a note as to which color you're looking for and we'll do our best to find them for you. Limited quantities available. This colored face plate fits inside the buckle bezel...

Buy

$24.89
Frequently
Purchased With

Item #: 14-1037 [More info]
[More info] Spacer - Inner - Seat Belt Buckle - Used ~ 1968 - 1972 Mercury Cougar / 1968 - 1972 Ford Mustang
Used spacer that fits inside your seat belt buckle and serves as a stop for when you assemble the metal buckle into the face plate/bezel. Installation is as shown in the pictures above. Sold individually, one...

Buy

$9.86
Frequently
Purchased With

Item #: 14673 [More info]
[More info] Fuel Tank - PREMIUM - Repro ~ 1969 Mercury Cougar / 1969 Ford Mustang
Reproduction fuel / gas tank for the Mercury Cougar or Ford Mustang. 20 Gallon capacity, very correct reproduction. Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE...

Buy

$284.65
Frequently
Purchased With

Item #: 10298 [More info]
[More info] Mounting Plate / Hold Down Disc - Spare Tire - Hold Down Mount - Styled Steel Wheel - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Spare tire, with styled steel wheel hold down disc. Fits all 1968-70 Mercury Cougar and Ford Mustang. Original Ford part number C8MY-1424-A. About 3 inches in diameter, this is the specified trunk hold down plate...

Buy

$27.35
Frequently
Purchased With

Item #: 24879 [More info]
[More info] Mounting Bracket - Throttle Cable - 351W-4V / 428CJ / SCJ - Used ~ 1969 Mercury Cougar / 1969 Ford Mustang
Bracket that mounts to the rear Carburetor mounting holes of all 1969 351-4V and 428 Cobra Jets or Super Cobra Jets. Has the square hole that holds the factory throttle cable and hole for the return spring. ...

Buy

$160.88

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

Glass Case