Office/Warehouse Closed Dec 24 - Dec 29 & Jan 1.

International Customers Click Here [Updated 12/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

CANADIAN CUSTOMER: Due to the Canada Postal Service strike, we recommend choosing DHL Express.
Note: UPS Mail Innovations is NORMALLY delivered by the post office, however UPS has transitioned all Canadian-bound shipments to a non-postal delivery service.

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Grille Headlight Eyelid Bump Stop / Alignment Kit - New ~ 1967 - 1968 Mercury Cougar

1967 Mercury Cougar
1968 Mercury Cougar

31 Review(s) 0

Item #: 30791

Price: $6.89

Cost: 552

Earns: 28

Bonus: 0

Availability

In-Stock Item - Ships: Next Business Day

Applications

1967 Mercury Cougar
1968 Mercury Cougar

Description

One of the most common problems with first-generation Cougars is droopy hidden headlight eyelids, which make the otherwise iconic front grille look like an eyesore. This inexpensive and easy to install kit provides stops for the eyelids to rest against in the closed position. It also provides some extra structural support to take some of the pressure off the built in bump stops.

The vacuum actuators on these cars create extreme downward pressure at all times when running, causing the upper adjustable stops to warp your soft grille castings over time. The damage caused is most noticeable on the outer edges of your grille, where often the corners will tip inward so severely that they will rub when the eyelid opens and closes. If this is the case, you'll also want our grille straightening kit, which is a set of spacers, like braces for your teeth, which can correct those bent corners. (Coming soon).

Check out our easy installation video below, which shows this kit in action:

As an addendum, here's how you can straighten the outer corners of your grille, which are often crooked:

Specifications:

Shipping Weight: 0.10 LBS

(weight shown may be the dimensional weight)

31 Reviews (4.87 of 5 Rating)

4.87 out of 5 stars
Based upon 31 Review(s).

5 Stars

81%

4 Stars

3 Stars

2 Stars

1 Stars

Write a review!

Steeleman

2023

3/10/2023

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Easy to do and works great. Also love the how-to video.

Roger

Chandler AZ.

67 XR7

2/13/2022

4.25 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

fit
functionality

Cons:

This kit fit well and it does its job well. I took off one star for craftsmanship because it seems kind of primitive to use a vice grip on the threads to install the studs. Just on principal I used 2 small hex nuts to double nut it and use a nut driver.

RollTheOldLady

2020

Simple Fix

2/12/2021

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Razor Straight

Cons:

Too Easy!

1968 Cougar - Simple to install, bolt on and done, all lined up like new.

Michael

2017

Easy solution

1/14/2020

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

A nice cheap, easy solution to get near perfect headlight door alignment.

Jonathan

Wisconsin

2013

Grill headlight eyelid bump stop kit

10/24/2019

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Nice simple fix for sagging headlight doors. Works great and make a big difference. Grill looks much better with these installed.

Product Q&A

Number of questions: 0

Please login to ask a question.

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 12334 [More info]
[More info] Rubber Bumpers - Grille / Headlight Eyelid Door - Economy - PAIR - Repro ~ 1967 - 1968 Mercury Cougar
Unfortunately the premium version is no longer available. This version is made of a softer compound than the original bumpers and will not hold up as long as the originals did on a Cougar due to the force...

Buy

$7.35
Frequently
Purchased With

Item #: 42497 [More info]
[More info] Tension Springs - Grille / Headlight Eyelid Door - Set of 4 - Repro ~ 1967 - 1968 Mercury Cougar
These tension springs are located on either side of your hidden headlamp eyelids. Our springs are made from the exotic alloy "Inconel". Inconel springs have approximately ten times the memory of the originals...

Buy

$28.53
Frequently
Purchased With

Item #: 26641 [More info]
[More info] Tips - Sun Visor - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These are usually cracked, shrunk or missing. Your visors will constantly fall out of the center holder if these are missing or shrunken. Sold as a pair. Replaces Ford Part #: D1DZ-6204115-A.

Buy

$0.85
Frequently
Purchased With

Item #: 31132 [More info]
[More info] Shaft Seal Kit - Headlight Vacuum Actuator - Repro ~ 1967 - 1970 Mercury Cougar
UPDATE 11-19-20: We still do not have the shaft seal dialed in but we are offering this kit with a proven substitute seal until further notice. This kit will recondition most FoMoCo headlamp actuators built from...

Buy

$29.57
Frequently
Purchased With

Item #: 23383 [More info]
[More info] Bumpers - License Plate / Fuel Door - Repro ~ 1967 - 1968 Mercury Cougar
Reproduction license plate / fuel door cover rubber bumpers for the Mercury Cougar or Ford Mustang. These will also work for the 1969-70 Mercury Cougar or Ford Mustang cowl cover to hood rubber bumpers. Sold as a...

Buy

$2.35
Frequently
Purchased With

Item #: 26467 [More info]
[More info] Decal - Background - Grille Center - Repro ~ 1967 - 1968 Mercury Cougar
Reproduction Center Grille Insert Background Decal for the 1967 and 1968 Mercury Cougar. This insert will need to be shaved down on 2 sides to fit correctly, do not force the insert into the grille, it will pooch...

Buy

$20.05
Frequently
Purchased With

Item #: 26623 [More info]
[More info] Bumpers - Radiator Support to Hood - PAIR - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
These Radiator Hood Support Bumpers reproductions are sold as a pair. They fit the 67, 68, 69, 70, 71, 72, and 73 Mercury Cougar. Replaces Ford part #: C5ZZ-16763.

Buy

$3.25
Frequently
Purchased With

Item #: 41526 [More info]
[More info] Headlamp Adjusting Screw - Repro ~ 1967 - 1970 Mercury Cougar - 1967 - 1970 Ford Mustang
Reproduction headlamp adjusting nut and screw. Slightly longer screw than stock, small amount of added length does not interfere with anything in or behind the grille. The nut is an exact copy of what is found on...

Buy

$2.85
Frequently
Purchased With

Item #: 26602 [More info]
[More info] Cover Pad - Headlight Dimmer Switch - Repro ~ 1967 - 1973 Mercury Cougar / 1967 - 1973 Ford Mustang
Covers the metal, foot operated headlight dimmer on the driver side floor pan. Replaces ford part #: C5ZZ-13533-A.

Buy

$3.45
Frequently
Purchased With

Item #: 26522 [More info]
[More info] Firewall / Cowl To Hood Seal - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
This 67 and 68 Firewall To Hood Seal Reproduction has attached rubber studs for mounting. Replaces Ford Part #: C7ZZ-16740.

Buy

$5.05
Frequently
Purchased With

Item #: 42186 [More info]
[More info] Door Bumpers - Set of 4 - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Four required per car. Replaces Ford Part #: C2AZ-6223030.

Buy

$2.88
Frequently
Purchased With

Item #: 30865 [More info]
[More info] Spring - Headlight Adjustment Ring - Repro ~ 1967 - 1968 Mercury Cougar
This reproduction spring puts tension on the headlight adjusting ring so when you turn the screw on the adjusters the ring remains tight and will move as adjusted. Sold individually, four required per car. These...

Buy

$1.67

<p>I have enjoyed dealing with Don and his group for years and now that I own more cougars the need is greater than ever. I look forward to their videos and easier ways to assemble they have been most helpful. I can navigate there catalog...

- Dean

Read More Testimonials

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

E4E12