International Customers Click Here [Updated 6/2024]

International Customers

Due to some ongoing challenges with the software we use to generate customs data and print shipping labels for international orders,
orders may take upto 7 days before we are able to generate the shipping label. If the order has USED item or items that need to be shipped from the supplier to us, it can take significantly longer.

Also be aware that even though we ship items with the proper documentation to show that duties and taxes are prepaid, some Postal Services are ignoring this and still charging these fees at delivery. If this occurs to you, please send us a copy of the receipt showing the tracking number with the fees paid and we can get the Duties/Taxes we charged to you refunded.

UK Customers / EU Customers

We are using a new shipping service where international shipments now include the Duties/Tax/Fees, so currently we can not offer USPS/Mail Innovations if the order is over 135GBP/150EUR, since USPS can not pay duties/taxes. If the order is less than 135GBP/150EUR, we can pay the taxes directly to the EU/UK and we can ship USPS/Mail Innovations*. All orders over 135GBP/150EUR have to ship UPS/DHL so we can use DDP to cover the Duties/Tax/Fees. This has allowed us to resume shipments of any value to the UK and EU.

TIP: You will likely be able to ship your order for less cost if you ship any items over 135GBP/150EUR on one order via UPS, then break the rest of the order up into orders of less than 135GBP/150EUR.

By breaking your orders up into less than 135GBP/150EUR:

you will avoid the import duties on those orders
less expensive shipping methods are available
you will avoid some UPS fees

Canadian Customers

We have worked with UPS to waive some of the brokerage fees. The rates shown now include all UPS fees. We have also added DHL, which offers lower cross boarder fees.

Our shipping provider has added Duties Prepaid options for US Postal Service options to Canada. This has allowed us to resume USPS shipments to Canada.

However, beware that this is a new process for the Post Office, so sometimes Canada Post shows the duties and taxes COD, when they are actually prepaid. If this happens, first inform Canada Post that the shipment was sent duties prepaid (DDP). If they still require you to pay the duties before delivery, please contact us.

Turkey Customers

The international shipping software we use requires that we pre-collect and pre-pay the duties and taxes. Because of recent changes to Turkey import laws, Turkey no longer supports this. Because of this you will need to use a shipping broker for us to ship items to you.

US Postal Service (USPS)

Our new international shipping system supports international shipments via USPS only if the order total (including shipping to most countries) is below the Duty/Tax De Minimis for your country (View De Minimis Chart).
Exceptions:
UK orders upto 135GBP
EU orders upto 150EUR

The US Postal Service (USPS) has suspended services to over a dozen countries (see complete list).
UPS Worldwide Services \ DHL Worldwide can still be delivered to these locations.

Brake Line Kit - Disc - Power Brakes - 8 Inch 28 Spline - OE STEEL - Repro ~ 1968 Mercury Cougar

Reproduction OE Steel Power Disc Brake Line Kit for the 1968 Mercury Cougar with a 8 Inch 28 Spline Rear Axle

1968 Mercury Cougar

2 Review(s) 0

Item #: 10687

Price: $207.25

Cost: 16580

Earns: 829

Bonus: 0

Availability

Ships Direct from Supplier (Except International) - Ships from Supplier Warehouse in 3-10 Business Days
EXCEPT AS NOTED IN THE PRODUCT DESCRIPTION
International Orders: This item will ship from the supplier to our warehouse before shipping to your address, add 7-10 Days

Applications

1968 Mercury Cougar

Description

This reproduction OE steel power disc brake line kit for 1968 Mercury Cougar equipped with the 8 inch rear end and 28 spline axles is bent and dropshipped from the supplier when it is ordered. These kits include all of the steel lines that run from the master cylinder to the wheel cylinders.

Specifications:

Shipping Weight: 25.00 LBS

(weight shown may be the dimensional weight)

2 Reviews (4.88 of 5 Rating)

4.88 out of 5 stars
Based upon 2 Review(s).

5 Stars

50%

4 Stars

50%

3 Stars

2 Stars

1 Stars

Write a review!

Steven

north carolina

2015

very good

7/17/2016

4.75 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

Good fit. a must have for 50 year old cars.

Mike

Idaho

Brake Line Kit

5/1/2015

5.00 out of 5

Material:

Fit:

Craftsmanship:

Correctness:

Pros:

Cons:

This is a great kit that fit perfectly on my 68. The line ends are color coded and bent to fit. The main line from master cylinder to rear brake hose come doubled up but included are complete instructions on how to straighten correctly. Once I followed these, there was no indication it had been shipped that way. Thank you!

Product Q&A

Number of questions: 1

Please login to ask a question.

Question

SwanDog Asked:

Curious who manufactures these lines? thanks.

March 23, 2023 10:16 AM

Answer

WCCC Admin Answered:

Fine Lines. We have found their lines to fit more reliably than some of the other suppliers.

March 30, 2023 9:42 PM

Click here to help us improve this product listing

Frequently purchased with:

Frequently
Purchased With

Item #: 11952 [More info]
[More info] Brake Distribution Block / Proportioning Valve Assembly - Disc - Power Brake - Repro ~ 1968 - 1969 Mercury Cougar / 1968 - 1969 Ford Mustang
Reproduction disc brake distribution block and proportioning valve assembly for the Mercury Cougar or Ford Mustang with factory disc brakes. This will also work on your 1968 - 1969 Fairlane / Torino / Montego /...

Buy

$180.05
Frequently
Purchased With

Item #: 19316 [More info]
[More info] Brake Line Kit - Proportioning Valve - Disc Brakes - Repro ~ 1968 - 1969 Mercury Cougar / 1968 - 1969 Ford Mustang
These are the two lines that connect the proportioning valve to the distribution block on the Mercury Cougar or Ford Mustang. Proportioning valve is not included in this kit, only the two brake lines. Check out...

Buy

$20.95
Frequently
Purchased With

Item #: 26148 [More info]
[More info] Rebuild / Seal Kit - Brake Proportioning Valve / Distribution Block - Disc Brake - New ~ 1967 - 1969 Mercury Cougar / 1967 - 1969 Ford Mustang / Torino
New disc brake proportioning valve / distribution block seal and rebuild kit for the Mercury Cougar or Ford Mustang / Torino. Every 1967-69 Cougar, Cyclone, Torino, Ranchero and Mustang equipped with disc brakes...

Buy

$45.55
Frequently
Purchased With

Item #: 41051 [More info]
[More info] Fastener Kit - Brake / Fuel Line - Repro ~ 1968 Mercury Cougar / 1968 Ford Mustang V8 Only
This quality kit contains everything you need to replace the original hardware for fuel and brake lines on your 1968 Cougar or V8 Mustang. It even includes 3 new bolts for the metal protector plate for the fuel...

Buy

$44.85
Frequently
Purchased With

Item #: 15298 [More info]
[More info] Master Cylinder - Disc - Power Brake - ECONOMY - Repro ~ 1967 - 1972 Mercury Cougar / 1967 - 1972 Ford Mustang
New reproduction power disc brake master cylinder for the Mercury Cougar or Ford Mustang equipped with factory power disc brakes in front and drums in the back. This unit has a 1" bore and includes a new cap...

Buy

$77.20
Frequently
Purchased With

Item #: 41808 [More info]
[More info] Brake Hose - Flex - Complete Set - Disc Brake - Steel Braided - Set of 3 - New ~ 1968 - 1969 Mercury Cougar / 1968 - 1969 Ford Mustang
28 Spline Rear Axle 3/8-24 fitting on Axle Lines. STOPFLEX® incorporates a special 4 layer design for superior strength and virtually no volumetric expansion. It starts with a Teflon PTFE core (liner) which is...

Buy

$226.65
Frequently
Purchased With

Item #: 19244 [More info]
[More info] Grille / Headlight Eyelid Door - Driver Side - Grade A - Used ~ 1968 Mercury Cougar
Good used part with no pitting or obvious damage. Includes stamped steel metal mounting bracket attached to the backside. Headlamp hinge C8WY-13A155-A. Ford part # C8WY-13A137-B. *NOTE* For use on 1968 Cougars...

Buy

$59.85
Frequently
Purchased With

Item #: 41815 [More info]
[More info] Brake Hose - Flex - Right Front - Disc Brake - RUBBER - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Flexible high pressure replacement brake hose for the front passenger (right hand) side of Mercury Cougars or Ford Mustangs equipped with disc brakes.Replaces Ford part # C8ZZ-2078-A.

Buy

$61.80
Frequently
Purchased With

Item #: 26220 [More info]
[More info] Weatherstrip - Door - Perimeter - PAIR - Repro ~ 1967 - 1968 Mercury Cougar / 1967 - 1968 Ford Mustang
Sold as a pair, includes plastic fasteners. There are multiple manufacturers of this particular item and we feel after using them all on our own cars that we carry the best out there. Replaces Ford part...

Buy

$35.05
Frequently
Purchased With

Item #: 13887 [More info]
[More info] Disc Brake Caliper Complete Hardware Rebuild Kit - Repro ~ 1968 - 1973 Mercury Cougar / 1968 - 1973 Ford Mustang
This kit is a must when redoing the disc brakes on a 1968-73 Cougar. Includes new brakets (caliper stabilizers), bolts, pins, and clips and rubber dust seals. Kit includes the pair.Check out our caliper tips and...

Buy

$74.55
Frequently
Purchased With

Item #: 41814 [More info]
[More info] Brake Hose - Flex - Left Front - Disc Brake - RUBBER - Repro ~ 1968 - 1970 Mercury Cougar / 1968 - 1970 Ford Mustang
Flexible high pressure replacement brake hose for the front driver (left hand) side of Mercury Cougars or Ford Mustangs equipped with disc brakes.Replaces Ford part # C8ZZ-2078-B.

Buy

$60.89
Frequently
Purchased With

Item #: 41842 [More info]
[More info] Backup / Reverse Light - Complete Kit - PREMIUM - Repro ~ 1967 - 1968 Mercury Cougar
This kit is a time and money saver. Quality chrome bezels and all related parts are included. This is a direct plug-in, no modifications needed.

Buy

$115.07

I bought my 69 Cougar in Jul of '09 as a retirement from the Army gift to myself. From day 1 it had intermittent heating problems that I tried to fix. I changed the radiator, thermostat, water pump, and added 2 12 in 1400 cfm electric cooling...

- MartinD

Read More Testimonials

My 1971 Cougar XR7 was retrofitted with a Ford “400”, Edelbrock intake and 4 barrel carb, TCI Street Fighter trans, B & M Hammer shifter, and dual turbo exhaust. While this sounds interesting, the Cougar itself was seriously neglected and...

- Frank

Read More Testimonials

Just got my quarter window glass installed in my restored quarter window frames; could not be happier! ...

- Mike Dunlap

Read More Testimonials

WCCC hooked me up with an original glove box cable and the correct screws WITH shoulders for my glove box. Their listing for these screws explains that the original screws have a shoulder for the cable and most people put in the wrong screws--which...

- Jim Davis

Read More Testimonials

I have been a cougar owner for just shy of 30 years, I have been dealing with part problems for a very long time. The people at WCCC have always be honest, and overly helpfull. I now have a 1970 XR-7 mostly rebuilt, and my son has a 1968 base...

- Voodochild5

Read More Testimonials

What did you LIKE about your experience? * : I am fairly new to WCCC, four or five orders (at the time of writing), but I am blessed to have found WCCC for sure. I had a small problem, couldn't find anything to work for the condensation drain on my...

- Kenneth Milden

Read More Testimonials

I have been working with Don Rush and his team for close to 20 years. In all of these years with many sales transactions I can say they have been 2nd to none. They have always been not only helpful but extremely knowledgeable. I certainly continue...

- Denver

Read More Testimonials

I have made many purchases online with WCCC but chose this time to make a 1400 mile round trip and visited them in person. I brought a van load of parts with me that needed a home. Don helped unload them then quickly assessed the value which I...

- pandamonium2112

Read More Testimonials

I just wanted to let you know that my order which was shipped (via UPS Mail Innovations) December 05 was at my front door, having gone thru Canada customs, on December 16. It arrived in excellent shape. Kudos to you guys, UPS, and the USPS for...

- Rod (Saskatchewan, Canada)

Read More Testimonials

I liked that I could see a picture of parts and that you could type in what you were looking for. What was handy for me was the ability to chat with Darrell. He was a big help. Also high on the you gotta keep on staff was Joshua, I had some issues...

- Rod (Canada)

Read More Testimonials